All Products

Shock shafts, steel, chrome finish (X-long) (2)

Big Bore shocks (short) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts w/ springs)(f/r)(2) (Note: Assembled with 32mm sha...

Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)

Turnbuckles, camber link, 47mm (67mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right)

Suspension arms, blue, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

Springs, front (black) (2)

Front axles (2)/ 4mm nylon locknuts (2)

Gear, 29-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 24-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Suspension arms, green, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

Screws, 4x10mm countersunk machine (hex drive) (6)

Screws, 3x6mm cap-head machine (hex drive) (6)

Half shaft pro-pack (internal-splined (6)/ external-splined (6) (plastic shafts only)

Gear, 18-T pinion (48-pitch) / set screw

Diff Gear GT/B4/T4

Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)

Turnbuckles (54mm) (2)/ 3x6x4mm aluminum spacers (rear camber links)

Silicone diaphragms (4)

Screw set for Sledgehammer® (assorted machine and self-tapping screws, no nuts)

Shock shafts, hardened steel, titanium nitride coated (long) (2)

BLACK BIG BORE SPRINGS 10 LB  (1 pair) Fits our #1855 Big Bore shocks that come standard on the Outlaw, Rocket and Beast Midget kits. Also fits all...

Steering Bellcrank Assembly (1pc)Plastic Bellcrank Assembly with post and bushingsFits all EPX/EPX Pro and STK Models

YELLOW BIG BORE SPRING 5 LB  (1 pair) Fits our #1855 Big Bore shocks that come standard on the Outlaw, Rocket and Beast Midget kits. Also fits all ...

(4) 5x8x2.5(4) 5x11x4(4) 5x10x4(6) 12x18x4(4) 10x15x4(4) 6x12x4

Use these spacers to increase length of Big Bore spring on longer shocks where more ride height is needed. Short spacers are .300″ and the long spa...

New style plastic propeller for Villain EX. Requires change to smaller pinion gears when used on older Villains equipped with part 1534 and 1533 pr...

The Anti-roll Bar Hardware contains all the parts needed to mount both front and rear bars.Contents: 2 Anti-Roll Bar Collars 4 Anti-Roll Bar Pivots...

Inspired by the real cars that race in the USMTS, IMCA, or UMP series across the nations heartland, the Tornado is a mid-western style dirt oval bo...