All Products

Stuffing tube (assembled with liner)

Stuffing tube (assembled with liner)

Rudder/ rudder arm/ hinge pin/ 3x15mm BCS (stainless) (2)/ NL 3.0 (2)/4x3mm BCS (stainless, with threadlock) (1)

Telemetry trigger magnet holder, center differential/ magnet, 5x2mm (1)/ 3x8mm BCS (3) (for use with #6814 center differential)

Spring, shock (red) (GTR) (1.8 rate double green stripe) (1 pair)

Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip

Chassis, low CG (gray)

Propeller shaft/ flex cable

Spring, shock (red) (long) (GTR) (5.4 rate double orange stripe) (1 pair)

Bumper, front/ bumper mount, front/ 4x10mm BCS (2)/ 3x25mm BCS (2)

Steering drag link/ 3x10mm shoulder screws (without threadlock) (2)

Ball bearing, black rubber sealed (20x27x4mm) (2)

Springs, red (for Big Bore shocks) (2.5 rate) (2)

Rod ends, heavy duty (Jato®/Slayer) (8)

Pull ring (2), fuel tank cap (1)/ engine shut-off clamp (1)

Brake pad set (inner and outer calipers with bonded friction material)

Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10), ELW 3x6.5x.45 (3)

Rocker arm set, long travel (120-T) (use with #5318 or #5318X pushrod)

Hollow ball, tall centered (2)/ tall offset hollow ball (2)/ bump steer adjustment shims; 3.5mm (2), 1.17mm (2)

Spring, shock (white) (GTR) (1.6 rate blue) (1 pair)

Multi-tool (plastic)

Spring, shock (white) (GTR) (front) (0.9 rate orange) (1 pair)

Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (2)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

Spring, shock (red) (GTR) (6.4 rate purple) (1 pair)

Spring, shock (red) (GTR) (3.8 rate gold) (1 pair)

Spring, shock (red) (GTR) (1.4 rate double pink stripe)

Spring, shock (white) (GTR) (std. rear) (1.4 rate pink) (1 pair)

Spring, shock (red) (GTR) (2.6 rate yellow) (1 pair)

Servo saver spring, heavy duty (for use with metal-gear servos)

Screw pins, 4x13mm (with threadlock) (4)

Gaskets, cooling head: 0.20, 0.30, 0.40mm (1 each) (0.30mm stock) (TRX® 3.3)

Bulkhead tie bars, front & rear (red-anodized aluminum)

Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

Flywheel nut (TRX® 2.5, 2.5R, 3.3)