Filter
All
Pin 3.5x24mm (4)
ARRMAARRMA - ARA713030The Pin, 3.5x24mm (4) by ARRMA is a quality built accessory.Product SpecificationsPart Type: Chassis Parts
Pins, axle (2.5x12mm) (4)
TraxxasPins, axle (2.5x12mm) (4)
Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
TraxxasPiston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
Piston/sleeve (matched set), wrist pin clips (2) (TRX® 3.3)
TraxxasPiston/sleeve (matched set), wrist pin clips (2) (TRX® 3.3)
Pivot Ball (9mm) (4pcs)
Redcat RacingPivot Ball (9mm) (4pcs)
Pivot Ball - Fine Thread M6x14x37mm (2)
ARRMAARRMA - ARA330657The Pivot Ball, Fine Thread M6x14x37mm (2): EXB by ARRMA is a quality built accessory.Product SpecificationsPart Type: Chassis P...
View full detailsPivot Ball - Steel - 4 pcs: Dementor, Kronos, Python, Shogun, Kagama, Syncro
Team CorallyPivot Ball, Steel, 4 pcs for Dementor, Kronos, Python, Shogun, Kagama
Pivot Ball Adjusting Nut - Aluminum - 4 pcs: Dementor, Kronos, Python, Shogun, Kagama, Syncro
Team CorallyPivot Ball Adjusting Nut, Aluminum, 4 pcs: Dementor, Kronos, Python, Shogun, Kagama
Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)
TraxxasPivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)
Pivot balls (4)/ pivot ball cap bushings (4)
TraxxasPivot balls (4)/ pivot ball cap bushings (4)
Pivot balls (4)/ pivot ball caps (4)
TraxxasPivot balls (4)/ pivot ball caps (4)
Pivot Balls and Rod Ends (12): MTXL
LosiLosi - LOS254031The Pivot Balls and Rod Ends (12): MTXL/DBXL-E/DBXL 2.0 by Losi is a quality built accessory.
Plastic Easy Pulls (4) w/ Body Clips for 1/10 Scale
IntegyPlastic Easy Pulls (4) w/ Body Clips for 1/10 Scale
IntegyPlastic Front Lower Arm for Pivot ball Front End
Redcat RacingPlastic Front Lower Arm for Pivot ball Front End *Only compatible if your vehicle has ball style front end conversion part number TMS-30
Plate, motor, blue (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
TraxxasPlate, Motor, Lightweight machined 6061-T6 Aluminum (blue-Anodized) (4mm thick)/ 3x10mm CS with Split and Flat Washer (2)
Plate, motor, red (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
TraxxasPlate, motor, 6061-T6 aluminum (red-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)
Primary clutch assembly/ 2x9.8mm pin/ 6x8x0.5 TW (1)
TraxxasPrimary clutch assembly/ 2x9.8mm pin/ 6x8x0.5 TW (1)
Primary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)
TraxxasPrimary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)
Pro Series Rubber Sealed Bearing Traxxas Slash 2WD
AZ Turn & Burn RCPro Series Rubber Sealed Bearing Traxxas Stampede 4WD
AZ Turn & Burn RCPro Series Shim Kit Wheel / Clutch HPI Baja
FasteddyProTek RC 3mm "High Strength" Nylon Locknut (20)
ProTek RCProTek RC 4x4mm "High Strength" Cup Style Set Screws (10)
ProTek RCProTek RC Aluminum Ball Stud Washer Set (Blue) (12) (0.5mm, 1.0mm & 2.0mm)
ProTek RCAluminum Ball Stud Washer Set, Blue, (12pcs)
ProTek RC Aluminum Ball Stud Washer Set (Green) (12) (0.5mm, 1.0mm & 2.0mm)
ProTek RCProTek RC Aluminum Ball Stud Washer Set (Purple) (12) (0.5mm, 1.0mm & 2.0mm)
ProTek RCProTek RC Aluminum Ball Stud Washer Set (Red) (12) (0.5mm, 1.0mm & 2.0mm)
ProTek RCPiston, Damper (Red) (4)/ E-clips (8)
TraxxasPiston, damper (red) (4)/ e-clips (8)
Piston/sleeve (matched set), wrist pin clips(2) (TRX® 2.5, 2.5R)
TraxxasPiston/sleeve (matched set), wrist pin clips(2) (TRX® 2.5, 2.5R)
Pivot Ball - M5 - 4 pcs
Team CorallyPivot Ball - M5 - 4 pcs
PIVOT BALL 5.8 (10)
XrayPivot Ball Steel - Conical Shaft - 4pcs
Team CorallyPivot Ball, Steel - Conical Shaft - 4pcs
Pivot Balls, Steel: Enduro
Team AssociatedEnduro Pivot Balls, Steel
Pivot balls: black (6), silver (2), black (long) (2)
TraxxasPivot balls: black (6), silver (2), black (long) (2)
Plastic Easy Pulls (4) w/ Body Clips for 1/10 Scale
IntegyPlastic Wheel Hex w/ Pin (4pcs ea.)
Redcat RacingWheel Hexes with Pins (12mm)(Plastic) (4pcs)
Plate, Motor, Green (4Mm Thick) (Aluminum)/ 3X10Mm Cs with Split And Flat Washer (2)
TraxxasPlate, Motor, Lightweight machined 6061-T6 Aluminum (green-Anodized) (4mm thick)/ 3x10mm CS with Split and Flat Washer (2)
Plate, motor, pink (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
TraxxasPlate, Motor, Lightweight machined 6061-T6 Aluminum (pink-Anodized) (4mm thick)/ 3x10mm CS with Split and Flat Washer (2)
Portal drive input gear, front/ drive pin/ cross pin
TraxxasPortal drive input gear, front/ drive pin/ cross pin
Primary gear set (23T and 33T)/ 2x11.8mm pin/ pin retainer/ disc spring
TraxxasPrimary gear set (23T and 33T)/ 2x11.8mm pin/ pin retainer/ disc spring
Primary gears, forward and reverse/ 2x11.8mm pin/ pin retainer/ disc spring
TraxxasPrimary gears, forward and reverse/ 2x11.8mm pin/ pin retainer/ disc spring