Batteries & Chargers

750mAh 7.4V 2-Cell 20C LiPo Battery

Chassis (162mm Long Battery Compartment) (fits Flat Style Battery Packs) (use Only with #7430R Front Bulkhead and #6726X Battery Hold-Down)

Charger, iD® Balance, USB (2-cell 7.4 volt LiPo with iD® connector only)

Battery, Series 1 Power Cell 1800mAh (NiMH, 6-C flat, 7.2V, Sub-C)

Battery, LaTrax®, 650mAh, LiPo

Adapter, Traxxas® iD® LiPo battery (adapts Traxxas® iD® batteries to separate balance ports)

Battery door/ battery strap/ retainers (2)/ latch

Battery hold-down/ battery compartment spacers/ foam pads

Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx® with extended chassis (352mm wheelbase)) Battery h...

Main chassis (black) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)

Main chassis (gray) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)

Battery expansion kit (allows for installation of taller battery packs in Maxx® with standard chassis (329mm wheelbase))

TRX-4M™ iD® charging port, 2-amp (for charging #2821 2-cell LiPo battery with Traxxas® EZ-Peak® iD chargers)

Wire harness, series battery connection (compatible with Traxxas® High Current Connector, NiMH only)

Wire harness, parallel battery connection (compatible with Traxxas® High Current Connector, NiMH only)

Battery hold-down mounts, left (2)/ right (2)/ 3x18mm CS (4)

Hold down, battery

Battery hold-down, tall (1)/ hold-down retainer, front & rear (1 each) (allows for installation of taller, multi-cell batteries)

Battery hold-downs, tall (2) (allows for installation of taller, multi-cell batteries)

Battery hold-down (1)/ hold-down retainer, front & rear (1 each)

Connector, 25.2 volt to 14.8 volt jumper (allows a Traxxas® dual-battery 25.2 ESC to run on a single 14.8V battery pack)

Tray, battery

Battery straps (225mm) (4)

Battery hold-down mounts, left (2)/ right (2)/ 4x15mm CCS (4)

Battery expansion kit (allows for installation of taller multi-cell battery packs) (Rustler®, Bandit, Stampede®)

Battery charge indicators (green (4), blue (4), gray (4))

Battery holder, 4-cell (no on/off switch) (for Jato® and others that use a male Futaba style connector)

Charger, AC, 350 mAh (5 cell, NiMH)

Charger, TQi (for use with Docking Base and #3037 rechargeable NiMh battery)

Charger, USB, dual-port (high output)

Battery hold-down (2)/ foam pad (2)

Battery hold-downs (2)

Upper chassis (long)/ battery hold down

Door, battery compartment (1)/ vents, battery compartment (1 pair) (fits right or left side)

Door, battery compartment (2) (fits right or left side)

Upper chassis/ battery hold down

Receiver box cover (for chassis top plate)/ battery cover (mid chassis)

Battery cups (2)

Bumper, rear (for use with mid-mounted RX battery)