Cars & Trucks: Replacement Parts

Gear, 13-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)

Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

Spur gear, 54-tooth, steel (1.0 metric pitch)

Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

Spur gear, 46-tooth (1.0 metric pitch)

Body support/ 3x12mm CS (4)

Gear, 14-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Propeller, 42x59mm

Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469)

Body mounts, front & rear/ 3x12mm CS (4)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (8)/ 3x12mm BCS (1)

Telemetry trigger magnet holder, center differential/ magnet, 5x2mm (1)/ 3x8mm BCS (3) (for use with #6814 center differential)

Spring, shock (red) (GTR) (1.8 rate double green stripe) (1 pair)

Battery straps (225mm) (4)

Propeller shaft/ flex cable

Spring, shock (red) (long) (GTR) (5.4 rate double orange stripe) (1 pair)

Gear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Bumper, front/ bumper mount, front/ 4x10mm BCS (2)/ 3x25mm BCS (2)

Body mount posts, front & rear (tall, for Summit)

Shocks, GTR composite (assembled) (2) (without springs)

Steering drag link/ 3x10mm shoulder screws (without threadlock) (2)

Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)

Springs, red (for Big Bore shocks) (2.5 rate) (2)

Rod ends, heavy duty (Jato®/Slayer) (8)

Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW

Spring, shock (white) (GTR) (1.6 rate blue) (1 pair)

Linkage, front sway bar (Revo®/Slayer) (3x70mm turnbuckle) (2) (assembled with rod ends, hollow balls and ball stud)

Spring, shock (white) (GTR) (front) (0.9 rate orange) (1 pair)

Shocks, GTR aluminum (assembled) (2) (without springs)

Spring, shock (red) (GTR) (6.4 rate purple) (1 pair)

Spring, shock (red) (GTR) (5.9 rate blue) (std. rear 120mm) (1 pair)

Spring, shock (red) (GTR) (3.8 rate gold) (1 pair)

Spring, shock (red) (GTR) (1.4 rate double pink stripe)

Spring, shock (GTR) (2.9 rate white) (std. front 90mm)

Spring, shock (white) (GTR) (std. rear) (1.4 rate pink) (1 pair)

Reverse installation kit (includes all components to add mechanical reverse (no Optidrive®) to T-Maxx® 3.3) (includes 2060 sub-micro servo)

Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2)

Propeller

Clutch bell (17-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm e-clip (2) (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Clutch bell (14-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm e-clip (2) (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)

Transmission output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (1) & M4/18.5 (1)