Filter
Cars & Trucks: Replacement Parts
Spur gear, 39-tooth (32-pitch)
TRAXXASSpur gear, 39-tooth (32-pitch)
Drive cups, inner (2) (steel constant-velocity driveshafts)/ screw pins (2)
TRAXXASDrive cups, inner (2) (steel constant-velocity driveshafts)/ screw pins (2)
Shock caps, aluminum (hard-anodized, PTFE-coated), GTX shocks (4)/ spacers (8)
TRAXXASShock caps, aluminum (hard-anodized, PTFE-coated), GTX shocks (4)/ spacers (8)
OUTPUT SHAFT TRANSMISSION
TRAXXASOutput shaft, transmission
Suspension arms, lower (right, front or rear) (1)
TRAXXASSuspension arms, lower (right, front or rear) (1)
Caster blocks (c-hubs) (2)/ steering block (2)
TRAXXASCaster blocks (c-hubs) (2)/ steering block (2)
Suspension arms, front & rear (4)
TRAXXASSuspension arms, front & rear (4)
Body, GTR long shock, aluminum (blue-anodized) (PTFE-coated bodies) (1)
TRAXXASBody, GTR long shock, aluminum (blue-anodized) (PTFE-coated bodies) (1)
Piston, damper (2x0.5mm hole, red) (4)/ travel limiters (4)
TRAXXASPiston, damper (2x0.5mm hole, red) (4)/ travel limiters (4)
Body, GTR xx-long shock, aluminum (red-anodized) (PTFE-coated bodies) (1)
TRAXXASBody, GTR xx-long shock, aluminum (red-anodized) (PTFE-coated bodies) (1)
Suspension arm set, rear (includes upper right & left and lower right & left arms)
TRAXXASSuspension arm set, rear (includes upper right & left and lower right & left arms)
Rudder pushrod, assembled/ servo horn/ 3x18mm BCS (stainless) (1)/ 3x15mm CS (stainless) (1)/ 3x6mm CS (stainless) (1)/ NL 3.0 (1)
TRAXXASRudder pushrod, assembled/ servo horn/ 3x18mm BCS (stainless) (1)/ 3x15mm CS (stainless) (1)/ 3x6mm CS (stainless) (1)/ NL 3.0 (1)
Stub axle, front, 5mm (steel-splined constant-velocity driveshaft) (1)
TRAXXASStub axle, front, 5mm (steel-splined constant-velocity driveshaft) (1)
Housing, differential (front/rear)
TRAXXASHousing, differential (front/rear)
Cover, gear/motor plate access cover/ motor mount hinge post / 3x10mm CS w/split and flat washers (1) / 2.5x4mm CS (2) / 3x8mm BCS (1) (for 550 motors)
TRAXXASCover, gear/motor plate access cover/ motor mount hinge post / 3x10mm CS w/split and flat washers (1) / 2.5x4mm CS (2) / 3x8mm BCS (1) (for 550 mot...
View full detailsSpur gear, 61-tooth
TRAXXASSpur gear, 61-tooth
Springs, shock (natural finish) (GTS) (0.45 rate) (2)
TRAXXASSprings, shock (natural finish) (GTS) (0.45 rate) (2)
Shaft, GTX shock, TiN-coated (2) (assembled with rod ends and steel hollow balls)
TRAXXASShaft, GTX shock, TiN-coated (2) (assembled with rod ends and steel hollow balls)
Driveshaft assembly, inner (1) (fits front & rear, differential side)
TRAXXASDriveshaft assembly, inner (1) (fits front & rear, differential side)
Spring, shock (red) (GTR) (0.314 rate) (1 pair)
TRAXXASSpring, shock (red) (GTR) (0.314 rate) (1 pair)
AXLE SHAFTS, FRONT, OUTER (2)
TRAXXASAxle shafts, front, outer (2)
DRIVESHAFT ASSEMBLY FRONT (1)
TRAXXASDriveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #...
View full detailsBumper, front (with LED lights) (replacement for #6736 front bumper)
TRAXXASBumper, front (with LED lights) (replacement for #6736 front bumper)
Chassis, charcoal gray
TRAXXASChassis, charcoal gray
Stub axle, aluminum (green-anodized) (1) (for use only with #7750X driveshaft)
TRAXXASStub axle, aluminum, (green-anodized) (1) (for use only with #7750X or 7896 driveshaft)
Springs, front (progressive, +20% rate, blue) (2)
TRAXXASSprings, front (progressive, +20% rate, blue) (2)
Housings, differential, rear
TRAXXASHousings, differential, rear
Pinion Gear, 18-T (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Spur gear, 55-tooth
TRAXXASSpur gear, 55-tooth
Drag link, machined 6061-T6 aluminum (red-anodized)
TRAXXASDrag link, machined 6061-T6 aluminum (red-anodized)
Cush drive key/ pin/ elastomer damper
TRAXXASCush drive key/ pin/ elastomer damper
Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
TRAXXASDriveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Bumper, front/ bumper mount, front (pink)
TRAXXASBumper, front/ bumper mount, front (pink)
WHEEL HUB HEX 7MM
TRAXXASWheel hubs, 7mm hex (4)/ axle pins (8)
Control box (complete) (EZ-Start® 2)
TRAXXASControl box (complete) (EZ-Start® 2)
Plate, motor, red (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
TRAXXASPlate, motor, 6061-T6 aluminum (red-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)