Cars & Trucks: Replacement Parts

Chassis

Suspension arms, upper, red (left or right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

Motor mounts (front and rear)/ 4x10 BCS with split and flat washers (1)/ pin (1) (for installation of #3481 motor into Maxx®)

Chassis

Drive hub, front (1)/ 3x10 screw pin (1)

Suspension arms, lower, black (left and right, front or rear) (2)Fits V.1 narrow Maxx® Heavy-duty lower Maxx® suspension arms utilize our latest pr...

Suspension arms, green, front (left), heavy duty (upper (1)/ lower (1))

Suspension arms, green, front (right), heavy duty (upper (1)/ lower (1))

Bulkhead, front (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Suspension link, front, 5x63mm (upper) (steel) (2)

Mounts, suspension arms (front & rear)/ hinge pin retainers (4)

Suspension arms, front (left & right)

Chassis brace (front)

Cable, T-lock, extra long (193mm) (for use with TRX-4® Long Arm Lift Kit)

Battery plate/ battery strap/ 3x8 flat-head screws (4) (requires #8072 inner fenders)

Nerf bars, chassis (2)

Suspension arm set, rear, extended wheelbase (lengthens wheelbase 10mm) (includes upper right & left and lower right & left arms)

Bulkhead, rear

Splitter extension (universal)/ 3x10mm CCS (2)

Motor coupler, collet style/ GS 4x3 SS (with threadlock) (1)/ wrench, 10mm (2)

Lower chassis, low CG (black)

Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip

Lower chassis, low CG (gray)

Drive dog/ 4x3mm GS (stainless, with threadlock) (1)

Driveshaft assembly (1), left or right (fully assembled, ready to install)/ M3/12.5mm yoke pin (1)

Shock tower, front

Caster blocks, 30-degree (left & right)/ steering blocks, 30-degree (left & right)

Rod ends, Revo® (large) with hollow balls (12)

Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (2)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

Spring, shock (GTR) (3.5 rate green) (std. rear 90mm)

Spring, shock (red) (GTR) (2.6 rate yellow) (1 pair)

Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

Flywheel nut (TRX® 2.5, 2.5R, 3.3)

Cover, gear/ rubber gear cover plug/ 3x6 RM (2)

Skid plates, front & rear (green)

Skid plates, front & rear (blue)

Battery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad

Main chassis (black) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)

Suspension Arms, Blue, Rear (Left and Right), Heavy Duty (2)

Suspension Arms, Red, Rear (Left and Right), Heavy Duty (2)

Suspension Arms, Green, Rear (Left and Right), Heavy Duty (2)

Suspension arms, green, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

Input gear, transmission, 22-tooth/ 2.5x12mm pin