Filter
Cars & Trucks: Replacement Parts
Gearbox halves (l&r) (gray) w/ idler gear shaft
TRAXXASGearbox halves (L&R) (grey) with idler gear shaft
Drive hub, front, hardened steel (1)/ screw pin (1)
TRAXXASDrive hub, front, hardened steel (1)/ screw pin (1)
WHEELS WHEELIE BAR BLK
TRAXXASWheels, wheelie bar (2)/ axles, wheelie bar (2)/ 10x15x4 plastic bushings (4) (for #7776, 8976, or 9576 wheelie bar)
Shock tower, front (left & right halves)
TRAXXASShock tower, front (left & right halves)
Ring gear, differential/ pinion gear, differential
TRAXXASRing gear, differential/ pinion gear, differential
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
TRAXXASDriveshafts, rear, steel-spline constant-velocity (complete assembly) (2)
SPUR GEAR 45-TOOTH
TRAXXASSpur gear, 45-tooth
Bulkhead, front (left & right halves)/ 3x10mm BCS (4)
TRAXXASBulkhead, front (left & right halves)/ 3x10mm BCS (4)/ 2.5x23mm CS (1)
Pinion gear, differential, 11-tooth (front) (heavy duty) (use with #7792 35-tooth differential ring gear)
TRAXXASPinion gear, differential, 11-tooth (front) (heavy duty) (use with #7792 35-tooth differential ring gear)
Ring gear, differential/ pinion gear, differential
TRAXXASRing gear, differential/ pinion gear, differential
Motor mount, finned aluminum
TRAXXASMotor mount, finned aluminum
Shock tower, rear
TRAXXASShock tower, rear
Motor mounts (front and rear)/ pins (2)
TRAXXASMotor mounts (front and rear)/ pins (2)
Wheel nuts, splined, 17mm, serrated (blue-anodized) (4)
TRAXXASWheel nuts, splined, 17mm, serrated (blue-anodized) (4)
Spring, shock, white (GTR long) (0.892 rate blue) (1 pair)
TRAXXASSpring, shock, white (GTR long) (0.892 rate blue) (1 pair)
Wire retainers, gear cover/ 3x4mm BCS (2)
TRAXXASWire retainers, gear cover/ 3x4mm BCS (2)
Turnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
TRAXXASTurnbuckles, camber link, 49mm (82mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede®, Rustler®) (13/37 ratio)
TraxxasDifferential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®)...
View full detailsWheel hubs, splined, 17mm, short (4)/ wheel nuts, splined, 17mm (4) (blue-anodized)/ hub retainer M4 X 0.7 (4)/ axle pin (4)/ wrench, 5mm
TRAXXASWheel hubs, splined, 17mm, short (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (Slash...
View full detailsBulkhead tie bars, front & rear, aluminum (blue-anodized)
TRAXXASBulkhead tie bars, front & rear, aluminum (blue-anodized)
Chassis, Slash 4X4
TRAXXASChassis, Slash 4X4
Housings, differential, front
TRAXXASHousings, differential, front
Hold down, battery/ hold down retainer/ battery post/ angled body clip (allows for installation of taller, multi-cell batteries)
TRAXXASHold down, battery/ hold down retainer/ battery post/ angled body clip (allows for installation of taller, multi-cell batteries)
Chassis Stampede 4x4
TRAXXASChassis, Stampede® 4x4
Bulkheads (l & r) (front) (gray)
TRAXXASBulkheads (l & r) (front) (grey)
Wheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4)
TRAXXASWheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4)
Lead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)
TRAXXASLead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)
Shock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
TRAXXASShock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
Gear adapter, fixed
TRAXXASGear adapter, fixed
Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
TRAXXASBox, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
TRAXXASTurnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
Gear, 27-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 27-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
Suspension pins, 2.5x29mm (king pins) w/ e-clips (2) (strengthens caster blocks)
TRAXXASSuspension pins, 2.5x31.5mm (king pins) with E-clips (2) (strengthens caster blocks)
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Spur gear, 36-tooth (1.0 metric pitch)
TRAXXASSpur gear, 36-tooth (1.0 metric pitch)
Shock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
TRAXXASShock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)