Filter
Cars & Trucks: Replacement Parts
Steel Alloy Motor Pinion Gear 1/8"/.6 Mod, 23T
ROBINSON RACINGMost commonly used on Kyosho and Tamiya electric cars and trucks. Steel alloy pinions are not heat treated and should only be used with plastic sp...
View full detailsLaydown Top Shaft: B6.1
Team AssociatedLaydown Top Shaft, for B6.1
RPM Short Traxxas Turnbuckle Rod End Set (Black) (12)
RPMRPM short rod ends replace Traxxas stock #5347 – requires stock Traxxas pivot balls Quick Links:
Ring gear, differential/ pinion gear, differential (12/47 ratio) (front)
TRAXXASRing gear, differential/ pinion gear, differential (12/47 ratio) (front)
Spur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
TRAXXASSpur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
Servo Mount Set, Aluminum: Mini-T 2.0
LOSILosi - LOS311008The Servo Mount Set, Aluminum: Mini-T 2.0, Mini-B by Losi is a quality built accessory.
Shock Assembly Front, Aluminum (2): Mini-T 2.0
LOSILosi - LOS314004The Shock Assembly Front, Aluminum (2): Mini-T 2.0, Mini-B by Losi is a quality built accessory.Product SpecificationsPart Type: ...
View full detailsAir filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (TRX 2.5, 2.5R, 3.3)
TRAXXASAir filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (use with #5266 filter body) (TRX® 2.5, 2.5R, 3.3)
Billet Machined Steering Bellcrank for Traxxas 1/10 Slash 2WD
INTEGYDrag link, machined 6061-T6 aluminum (orange-anodized)
TRAXXASDrag link, machined 6061-T6 aluminum (orange-anodized)
Steering blocks, 6061-T6 aluminum (blue-anodized), left & right
TRAXXASSteering blocks, 6061-T6 aluminum (blue-anodized), left & right
AZTAB LOSI SUPER ROCK REY REAR BULKHEAD LOS251087
AZTABBox, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2)
TRAXXASBox, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2)
Camber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, rear (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4)...
View full detailsSprings, front (blue) (2)
TRAXXASSprings, front (blue) (2)
Axles (front) (2)
TRAXXASAxles (front) (2)
Battery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)
TRAXXASBattery door, transmitter (replacement for #6516, 6517, 6528, 6529, 6530 transmitters)
1/10 SC Wheel Adapters 12mm
JetkoBumper, rear/ bumper mount, rear (pink)
TRAXXASBumper, rear/ bumper mount, rear (pink)
Coupler, exhaust (silicone)
TRAXXASCoupler, exhaust (siliconee)
Body Post Mount (F/R)
REDCATBody Post Mount (F/R)
Gear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
CVA SHAFTS W/ PINS (1SET)
REDCATCenter Drive Shaft for Axial SCX6 2pcs Red
RACERS EDGETurnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link set)
TRAXXASTurnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...
View full detailsRC10B6.3 front shock tower, carbon fiber
Team AssociatedThis part fits the following vehicles:RC10B6.3RC10B6.3D
Spur Gear-46T
REDCATSpur Gear-46T
Lower chassis, low CG (blue)
TRAXXASLower chassis, low CG (blue)
Stub axle carriers (2)
TRAXXASStub axle carriers (2)
Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
TRAXXASTurnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
TRAXXASDifferential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
Team Associated 48P Spur Gear (66T)
TEAM ASSOCIATEDTeam Associated - ASC3924The 48 Pitch Spur Gear, 66T: TC3-7.1/RC10/RC12 by Team Associated is a quality built accessory.Product SpecificationsPar...
View full detailsSkidplate, chassis
TRAXXASSkidplate, chassis
hex combinator 12MM combinator 5.0 6.0 7.0
AZTABTurnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
TRAXXASTurnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
Suspension arms, front (right), heavy duty (upper (1)/ lower (1))
TRAXXASSuspension arms, front (right), heavy duty (upper (1)/ lower (1))
Cage Rear, Tower Supports,Mud Guards: SuperRockRey
LOSICamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS ...
View full detailsSuspension arms upper (1)/ suspension arm lower (1) (right front)
TRAXXASSuspension arms upper (1)/ suspension arm lower (1) (right front)
Servo Saver Set Assembled (1pc)
REDCATServo Saver Set Assembled (1pc)Plastic Servo Saver Assembly for all EPX/EPX Pro and STK Models.
AZTAB Aluminum Lower Link Mount Set for Axle (Gen8)
AZTABHardened copper steel Front/Rear worm gears set for Axial SCX24 4Pcs
AZTABBulkhead, front 4-TEC 2.0
TRAXXASBulkhead, front
Suspension arms, long (rear)
TRAXXASSuspension arms, long (rear)
RPM Rear Upper & Lower A-Arms (1/16 E-Revo) (Black) 7132
RPMRear Upper/Lower A- Arms, for Traxxas 1/16 E-Revo, Black
Rebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)
TRAXXASRebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)
Rebuild kit, GTS shocks (x-rings, o-rings, pistons, bushings, e-clips, and rod ends)
TRAXXASRebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)
Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone grease
TRAXXASReceiver Box Cover (for Use Only with #8224 Receiver Box and #2260 BEC)/ Foam Pads/ Seals/ Silicone Grease