Cars & Trucks: Replacement Parts

Half shafts, heavy duty (external splined (2)/ internal splined (2))/ metal u-joints (4)

Springs, front (progressive, +10% rate, pink) (2)

Cover, gear/ motor wire hold-down clip

Ring gear, differential/ pinion gear, differential (rear)

Driveshaft, center, 6061-T6 aluminum (red-anodized)

Driveshaft, center, 6061-T6 aluminum (blue-anodized)

Gear clutch, complete (high stall)

Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4x4 center differential)

Driveshaft, center, 6061-T6 aluminum (orange-anodized) (189mm)

Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 22-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Body mount (1)/ body mount post (2) (front)

Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 26-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw

Spur gear, steel, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

Gear set, differential (spider gears (4)/ spider gear shaft (2))

Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 13-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)

Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

Spur gear, 54-tooth, steel (1.0 metric pitch)

Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

Spur gear, 46-tooth (1.0 metric pitch)

Body support/ 3x12mm CS (4)

Gear, 14-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Propeller, 42x59mm

Hub retainer, 17mm hubs, M4 X 0.7 (4) (use with #5853X, #6856X, #6469)

Telemetry trigger magnet holder, center differential/ magnet, 5x2mm (1)/ 3x8mm BCS (3) (for use with #6814 center differential)

Spring, shock (red) (GTR) (1.8 rate double green stripe) (1 pair)

Battery straps (225mm) (4)

Propeller shaft/ flex cable