Cars & Trucks: Replacement Parts

Gear, 16-T pinion (48-pitch) / set screw

Carriers, stub axle (rear) (2)

New style plastic propeller for Villain EX. Requires change to smaller pinion gears when used on older Villains equipped with part 1534 and 1533 pr...

Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)

Shock shafts, steel, chrome finish (X-long) (2)

Big Bore shocks (short) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts w/ springs)(f/r)(2) (Note: Assembled with 32mm sha...

Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)

Suspension arms, blue, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

Springs, front (black) (2)

Front axles (2)/ 4mm nylon locknuts (2)

Gear, 29-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 14-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 24-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 22-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)

Camber link set for Bandit® (gray) (plastic/ non-adjustable)

Gear, 12-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 21-T pinion (48-pitch) / set screw

Gear, 19-T pinion (48-pitch) / set screw

Suspension arms (front) (2)

Half shaft pro-pack (internal-splined (6)/ external-splined (6) (plastic shafts only)

Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)

Gear, 18-T pinion (48-pitch) / set screw

Wheel hubs, 12mm hex (blue-anodized, lightweight aluminum) (2)/ axle pins (2)

Wheel hubs, 12mm hex (2)/ stub axle pins (2)

Spur Gear, 87 Tooth, 48 Pitch

Diff Gear GT/B4/T4

This part fits the following vehicles:DR10ProSC10RC10B5RC10B5MRC10B6RC10B6 Club RacerRC10B6.1RC10B6.1DRC10B6.1DLRC10B6.2RC10B6.2DRC10B6DRC10SC5MRC1...

Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)

Silicone diaphragms (4)

Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

Shock shafts, hardened steel, titanium nitride coated (long) (2)

Shock shafts, steel, chrome finish (long) (2)

BLACK BIG BORE SPRINGS 10 LB  (1 pair) Fits our #1855 Big Bore shocks that come standard on the Outlaw, Rocket and Beast Midget kits. Also fits all...

Upper Suspension Links 2pcsFits all: Lightning models

YELLOW BIG BORE SPRING 5 LB  (1 pair) Fits our #1855 Big Bore shocks that come standard on the Outlaw, Rocket and Beast Midget kits. Also fits all ...

Use these spacers to increase length of Big Bore spring on longer shocks where more ride height is needed. Short spacers are .300″ and the long spa...