Filter
Cars & Trucks: Replacement Parts
AZTAB Metal Center Drive Shafts for SCX24 ( Deadbolt, Betty)
AZTABLead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)
TRAXXASLead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)
ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear (5.0mm Bore) (22t)
PROTEK RCTeam Associated 12mm V2 Big Bore Shock Rebuild Kit
Team Associated12mm V2 Shock Rebuild
Shock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
TRAXXASShock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
Suspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/ 3X16mm BCS (8)
TRAXXASSuspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/ 3X16mm BCS (8)
Chassis brace kit, orange (fits Rustler® 4X4 or Slash 4X4 models equipped with Low-CG chassis)
TRAXXASChassis Brace Kit, Orange (fits Rustler® 4X4 Or Slash® 4X4 models Equipped with Low-CG Chassis)
RPM Traxxas Slash Front Bumper & Skid Plate (Chrome)
RPMGear adapter, fixed
TRAXXASGear adapter, fixed
Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
TRAXXASBox, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
Discount -Idler Gear Shaft For KIT-MINI MG
3RACINGRC10B6.2 CVA bone (69mm)
Team AssociatedRC10B6.2 CVA Bone (69mm)
Suspension pins, 2.5x29mm (king pins) w/ e-clips (2) (strengthens caster blocks)
TRAXXASSuspension pins, 2.5x31.5mm (king pins) with E-clips (2) (strengthens caster blocks)
Spur gear, 36-tooth (1.0 metric pitch)
TRAXXASSpur gear, 36-tooth (1.0 metric pitch)
Team Associated 3x35mm Shock Shaft (2)
Team AssociatedTeam Associated T6.1/SC6.1 Rear Suspension Arms
Team AssociatedAZTAB 20mm Red Hex Extension
AZTABWing (exocarbon)/ wing mounts (2)/ washers (2)
TRAXXASWing (exocarbon)/ wing mounts (2)/ washers (2)
Body mounts, front & rear
TRAXXASBody mounts, front & rear
ADJUSTABLE ARM KIT FOR TLR 22SCT 1.0
CUSTOM WORKSADJUSTABLE ARM KIT FOR TLR 22SCT 1.0 Fits Original version 22SCT. Will work on 2.0 and 3.0 with use of 1.0 Rear hubs.
Hot Racing TLR 22 Aluminum Clamping Servo arm (25T)
HOT RACINGSpring, shock red (GTR) (5.4 rate pink) (1 pair)
TraxxasSpring, shock red (GTR) (5.4 rate pink) (1 pair)
RPM Front Skid Plate (Black) (Slash)
RPMFront Skid Plate, for Slash, Black
RPM Adjustable Rear Body Mount
RPMRPM - RPM81142The Adjustable Rear Body Mount/Posts: SLH, ST, NST by RPM is a quality built accessory.Product SpecificationsMaterial: CompositeCol...
View full detailsTLR 22 STREET STOCK AND LATE MODEL MOUNT KIT (2.0-5.0)
MCALLISTER RACINGCustom Works Red Big Bore Shock Spring 6LB
CUSTOM WORKSRED BIG BORE SPRING 6 LB (1 pair) Fits our #1855 Big Bore shocks that come standard on the Outlaw, Rocket and Beast Midget kits. Also fits all big...
View full detailsBig Bore shocks (XX-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
TRAXXASBig Bore shocks (XX-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
Team Associated 48P Stealth Spur Gear (81T)
Team AssociatedThis part fits the following vehicles:RC10B3RC10L3ORC10L3TRC10L4ORC10TRC10T3RC12L3O
Clamping 25T Servo Horn, 24mm
VANQUISH PRODUCTSTeam Associated 12mm V2 Shock Cap Bleeder Screw & Gasket Set
Team AssociatedExotek 22 3.0 Aluminum Steering Posts
EXOTEK RACINGShock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)
TRAXXASShock caps, aluminum (green-anodized) (4) (fits all Ultra Shocks)
RPM 1/4" Snap-Tite Body Savers (Black) (5) (1914R)
RPMTeam Associated Factory Team FOX Kashima Coated V2 Truck Rear Shock Body (2) (12x36mm)
Team AssociatedTeam Associated RC10 B6.2D 73mm Rear Suspension Arm (2)
Team AssociatedRC10B6.2 Rear Suspension Arm (73mm)