Electronics
Distribution block, LED light set
TraxxasDistribution block, LED light set
Pro Scale® Advanced Lighting Control System (includes power module & distribution block)
TraxxasPro Scale® Advanced Lighting Control System Specs, videos, FAQs, and more Learn MoreTraxxas Pro Scale LightingTraxxas LED lighting sets the standar...
View full detailsBattery straps (4)
TraxxasBattery straps (225mm) (4)
Reverse installation kit (includes all components to add mechanical reverse (no Optidrive®) to T-Maxx® 3.3) (includes 2060 sub-micro servo)
TraxxasReverse installation kit (includes all components to add mechanical reverse (no Optidrive®) to T-Maxx® 3.3) (includes 2060 sub-micro servo)
Connector, wiring harness (EZ-Start® and EZ-Start® 2)
TraxxasConnector, wiring harness (EZ-Start® and EZ-Start® 2)
TRX® 3.3 Engine IPS Shaft w/Recoil Starter
TraxxasTRX 3.3 Engine IPS Shaft with Recoil Starter
Motor (EZ-Start®)
TraxxasMotor (EZ-Start®)
Motor, Titan® 550, reverse rotation (21-turns/ 14 volts) (1)
TraxxasMotor, Titan® 550, reverse rotation (21-turns/ 14 volts) (1)
Mounting plate, electronic speed control/receiver box (for installation of XL-5/VXL and waterproof receiver box into Stampede®)
TraxxasMounting plate, electronic speed control/receiver box (for installation of XL-5/VXL and waterproof receiver box into Stampede®)
Cooling fan, Velineon® VXL ESC (fits VXL-6s & VXL-8s)
TraxxasCooling fan, Velineon® VXL ESC (fits VXL-4s, VXL-6s & VXL-8s)
SEAL KIT RECEIVER BOX
TraxxasSeal kit, receiver box (includes o-ring, seals, and silicone grease)
Dual cooling fan kit (with shroud), Velineon® 1200XL motor
TraxxasDual cooling fan kit (with shroud), Velineon® 1200XL motor
Motor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 6.5mm gold-plated bullet connectors) (for Maxx®/Hoss™) (not for use in marine models)
TraxxasMotor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 6.5mm gold-plated bullet connectors) (for Maxx®/Hoss®) (not for use in marine models)
Rod ends, long (6)/ hollow ball connectors (6)
TraxxasRod ends (long) (6)/ hollow ball connectors (6)
Charger, EZ-Peak® Live, 100W, NiMH/LiPo with iD® Auto Battery Identification
TraxxasEZ-Peak Live 12-amp NiMH/LiPo Fast Charger with iD® Auto Battery Identification and Bluetooth®
Motor, Velineon® 1200XL, brushless
TraxxasMotor, Velineon® 1200XL, brushless
Main chassis (black) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)
TraxxasMain chassis (black) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)
AC to DC converter, 40W
TraxxasAC to DC Converter, 40W (for Traxxas® DC chargers)
Servo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof
TraxxasServo, digital high-torque 400 brushless, metal gear (ball bearing), waterproof
Charger, EZ-Peak® Plus, 4 amp, NiMH/LiPo with iD® Auto Battery Identification
TraxxasCharger, EZ-Peak® Plus, 4 amp, NiMH/LiPo with iD® Auto Battery Identification
SERVO 330 HIGH TORQUE CORELESS
TraxxasServo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
Plug Adapter (For TRX® Power Charger to charge 7.2V Packs)
TraxxasPlug Adapter (For TRX® Power Charger to charge 7.2V Packs)
Battery, Series 3 Power Cell, 3300mAh (NiMH, 7-C flat, 8.4V)
TraxxasBattery, Series 3 Power Cell iD®, 3300mAh (NiMH, 7-C flat, 8.4V)
Servo gears (for 2055, 2056 servos)
TraxxasServo gears (for 2055, 2056 servos)
Traxxas® connector, 4s (male) (2) - FOR ESC USE ONLY
TraxxasTraxxas connector, 4s (male) (2) - FOR ESC USE ONLYFOR ESC USE ONLY The Traxxas 4s connector adds single 4s LiPo compatibility to the VXL-6s speed ...
View full detailsLiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries)
TraxxasLiPo cell voltage checker/balancer (includes #2938X adapter for Traxxas® iD® batteries)
Charger, DC, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH)
TraxxasCharger, D/C, 4 amp (6 - 7 cell, 7.2 - 8.4 volt, NiMH)
Servo, high-torque, waterproof (blue case)
TraxxasServo, high-torque, waterproof (blue case)
Rudder pushrod, assembled/ servo horn/ 3x18mm BCS (stainless) (1)/ 3x15mm CS (stainless) (1)/ 3x6mm CS (stainless) (1)/ NL 3.0 (1)
TraxxasRudder pushrod, assembled/ servo horn/ 3x18mm BCS (stainless) (1)/ 3x15mm CS (stainless) (1)/ 3x6mm CS (stainless) (1)/ NL 3.0 (1)
Plastic rod ends (8) (1/6 and 1/5 scale)/ hollow ball connectors (8) (6-black, 2-silver)
TraxxasPlastic rod ends (8) (1/6 and 1/5 scale)/ hollow ball connectors (8) (6-black, 2-silver)
Plate, motor (for single motor installation, use with gear cover #5677X)
TraxxasPlate, motor (for single motor installation, use with gear cover #5677R)
Cover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)
TraxxasCover, gear/ 3x8mm CS (1) (for single motor installation, use with motor plate #5690X)
Motor, clockwise (1)/ motor, counter-clockwise (1)
TraxxasMotor, clockwise (1)/ motor, counter-clockwise (1)
Plate, motor
TraxxasPlate, motor
Bumper, rear (for use with mid-mounted RX battery)
TraxxasBumper, rear (for use with mid-mounted RX battery)
Servo horns, steering and throttle (for non-Traxxas servos (Hitec, JR, KO, Airtronics))
TraxxasServo horns, steering and throttle (for non-Traxxas® servos (Hitec, JR, KO, Airtronics))
Battery cover (mid chassis), Exo-Carbon finish (Jato)
TraxxasCover plate, steering servo/ 3x8 BCS (4)
TraxxasCover plate, steering servo/ 3x8mm BCS (4)
Servo horns, steering and throttle (for non-Traxxas servos (Hitec, JR, KO, Airtronics))
TraxxasServo horns, steering and throttle (for non-Traxxa®s servos (Hitec, JR, KO, Airtronics))
Battery Box Cover, bumper (rear), Exo-Carbon finish (Jato)
TraxxasReverse installation kit (includes all components to add mechanical reverse (no Optidrive) to Revo) (includes 2060 sub-micro servo)
TraxxasReverse installation kit (includes all components to add mechanical reverse (no Optidrive®) to Revo®) (includes 2060 sub-micro servo)
Control box battery cover w/ belt clip (EZ-Start 2)
TraxxasControl box battery cover with belt clip (EZ Start 2)
Charger, AC, 2 amp NiMH peak detecting (5-7 cell, 6.0-8.4 volt, NiMH only)
TraxxasCharger, AC, 2 amp NiMH peak detecting (5-7 cell, 6.0-8.4 volt, NiMH only)
Foam battery securing block
TraxxasFoam battery securing block
Battery, Series 4 Power Cell, 4200mAh (NiMH, 7-C flat, 8.4V)
TraxxasBattery, Series 4 Power Cell iD®, 4200mAh (NiMH, 7-C flat, 8.4V)
Servo, standard
TraxxasServo, standard
Nimh 6-Ce Battery pack 16 E-Revo,1/16 Slash 4X4, 1/16 Summit, 1/18 LaTrax Desert1/18 LaTrax Rally, 1/18 LaTrax Teton
TraxxasBattery, Series 1 Power Cell iD®, 1200mAh (NiMH, 6-C flat, 7.2V, 2/3A)
Tray, radio/ drive shaft mount w/ pressure fitting
TraxxasTray, radio/ drive shaft mount with pressure fitting