Hardware

Pins, axle (2.5x12mm) (4)

Screws, 3x20mm button-head machine (hex drive) (6)

PTFE-coated washers (5x11x.5mm) (use with self-lubricating bushings)

Gear, 11-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Caster blocks (c-hubs) (2)/ kingpin bushings (4)

Suspension screw pin set, front or rear (hardened steel), 4x18mm (4), 4x38mm (2), 4x33mm (2), 4x43mm (2)

Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Cush drive key/ pin/ elastomer damper

Screw pin set (Rustler®, Bandit®, Stampede®)

Drive hub, front, hardened steel (1)/ screw pin (1)

Nuts, 5mm flanged nylon locking (steel, serrated) (8)

Hold down, battery/ hold down retainer/ battery post/ angled body clip (allows for installation of taller, multi-cell batteries)

Suspension arm guards, front (2)/ guard spacers (2)/ hollow balls (2)/ 3X16mm BCS (8)

Gear, 27-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Suspension pins, 2.5x31.5mm (king pins) with E-clips (2) (strengthens caster blocks)

Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Team Associated - ASC25187The M3x14mm Button Head Hex Screw: MGT by Team Associated is a quality built accessory.

Nuts, 3mm nylon locking (12)

Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)

E-clips, 1.5mm (24)

12mm V2 Bleeder Gasket

M3X0.5X5 BHCS

Battery hold-down plate (black)/ metal posts (2)/body clips (2)

FT 3 x 27.5 SHOCK SHAFT (V2), CHROME FOR #91577 & #91578

Features High Quality Metal/Rubber Shielded Bearings Kits Includes All Bearings (Standard, Flanged, One-Way and Thrust If Needed) Extra Be...

Introduction B44.3, NDS, RC10B3, RC10B44.1, RC10B44.2, RC10DS, RC10F6, RC10R5.1, RC10T3, RC12R5.2, RC12R6, TC5, TC5F, TC5R, TC6, TC6.2

5X7mm Shim Kit, 0.1/0.2/0.3mm, 10pcs

Nuts, 5mm flanged nylon locking (aluminum, red-anodized, serrated) (4)

Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Nuts, 5mm flanged nylon locking (steel, black serrated) (8)

Wheel Lock Blots

King Pin Bushings (12pcs)

Half shafts, outer (extended, front or rear) (4)/ e-clips (8) (for use with #8995 WideMaxx® suspension kit)

Installation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Mercedes-Benz® G 500® & G 63® (includes mount, rear bumper lens, turn sig...

Team Associated - ASC9739The Slipper Spring: B44 by Team Associated is a quality built accessory.Product SpecificationsPart Type: Chassis Parts

These superior bearings will smooth out the play in critical areas of your vehicle for all-around performance gains. Distinguished by a blue shield...