Filter
Hardware
REAR DRIVESHAFT O-RING, SLEDGE
TraxxasO-rings (6)
SHOULDER SCREW 3X16MM
TraxxasShoulder screws, 3x16mm (2)
WING/WING WASHER
TraxxasWing/ wing washer/ 4x12mm FCS (2)
SUSPENSION PINS - COMPLETE SET
TraxxasSuspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5x48.2mm (2), 3.5x56.7mm (2)/ M3x0.5mm NL, flanged (4)
Wing/ wing washer (green)/ 4x12mm FCS (2)
TraxxasWing/ wing washer (green)/ 4x12mm FCS (2)
Driveshaft assembly (1), left or right (fully assembled, ready to install)/ screw pin (1)
TraxxasDriveshaft assembly (1), left or right (fully assembled, ready to install)/ screw pin (1)
Battery hold-down (2)/ battery clip/ hold-down post/ screw pin/ pivot post screw
TraxxasBattery hold-down (2)/ battery clip/ hold-down post/ screw pin/ pivot post screw
Carrier, differential/ x-ring gasket/ o-ring (2)/ 10x19.5x0.5 TW
TraxxasCarrier, differential/ x-ring gasket/ o-ring (2)/ 10x19.5x0.5 TW Differential carrier includes X-ring gasket, O-rings (2), and 10x19.5x0.5 washer R...
View full detailsTailgate protector, green/ 3x15mm flat-head screw (4)
TraxxasTailgate protector, green/ 3x15mm flat-head screw (4)
Gear set, differential (output gears (2)/ spider gears (4)/ spider gear shaft (2)/ output shaft (2)/ 2.5X13.8 pin (2))
TraxxasGear set, differential (output gears (2)/ spider gears (4)/ spider gear shaft (2)/ output shaft (2)/ 2.5X13.8 pin (2))
Plate, motor, blue (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
TraxxasPlate, Motor, Lightweight machined 6061-T6 Aluminum (blue-Anodized) (4mm thick)/ 3x10mm CS with Split and Flat Washer (2)
Cross pin (2)/ drive pin (2) (repairs 1 axle shaft)
TraxxasCross pin (2)/ drive pin (2) (repairs 1 axle shaft)
Drive hub, front (1)/ 3x10 screw pin (1)
TraxxasDrive hub, front (1)/ 3x10 screw pin (1)
Servo horn, steering/ linkage, steering (46mm, assembled with pivot balls)
TraxxasServo horn, steering/ linkage, steering (46mm, assembled with pivot balls)
Suspension pins, lower, inner (front or rear), 4x64mm (2) (hardened steel)
TraxxasSuspension pins, lower, inner (front or rear), 4x64mm (2) (hardened steel) Pair of 4x64 mm hardened steel inner lower suspension pins. Fits front o...
View full detailsSuspension pin set, front (left or right) (hardened steel), 4x64mm (1), 4x22mm (2), 4x38mm (1), 4x33mm (1), 4x47mm (1)
TraxxasSuspension pin set, front (left or right) (hardened steel), 4x64mm (1), 4x22mm (2), 4x38mm (1), 4x33mm (1), 4x47mm (1)
Driveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
TraxxasDriveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)
Bumper, front, winch, TRX-4® Sport (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® Sport with 8855 winch) (191mm wide)
TraxxasBumper, front, winch, TRX-4® Sport (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® Sport with 8855 winch) (191mm wide)
Housing, spool / spool shaft/ bushing
TraxxasHousing, spool / spool shaft/ bushing
Drive cup, machined steel (2)/ 4x17mm screw pins (2)
TraxxasDrive cup, machined steel (2)/ 4x17mm screw pins (2)
Suspension pin set (front) (3x51mm (2), 3x54mm (2), 3x93mm (2))
TraxxasSuspension pin set (front) (3x51mm (2), 3x54mm (2), 3x93mm (2))
Nuts, 5mm flanged nylon locking (aluminum, black-anodized, serrated) (4)
TraxxasNuts, 5mm flanged nylon locking (aluminum, black-anodized, serrated) (4)
Nuts, 4mm nylon locking, black (10)
TraxxasNuts, 4mm nylon locking (black) (10)
Wing/ wing washer (White)/ 4x12mm FCS (2)
TraxxasWing/ wing washer (white)/ 4x12mm FCS (2)
Nuts, 3mm flanged (8) Black
TraxxasNuts, 3mm nylon locking, flanged, black (8)
Wing/ wing washer (blue)/ 4x12mm FCS (2)
TraxxasWing/ wing washer (blue)/ 4x12mm FCS (2)
Plate, motor, pink (4mm thick) (aluminum)/ 3x10mm CS with split and flat washer (2)
TraxxasPlate, Motor, Lightweight machined 6061-T6 Aluminum (pink-Anodized) (4mm thick)/ 3x10mm CS with Split and Flat Washer (2)
Body Accessories, Chevrolet C10, Black Chrome (Include, Grille (Upper and Lower), Headlight Housings (Left and Right), Bumpers (Front and Rear), Mounting Retainers And Hardware)
TraxxasBody Accessories, Chevrolet C10, Black Chrome (includes Grille (upper and Lower), Headlight Housings (Left and Right), Bumpers (front and Rear), Mo...
View full detailsBody accessories, Chevrolet C10, black (includes grille (upper & lower), headlight housings (left & right), bumpers (front & rear), mounting retainers and hardware)
TraxxasBody accessories, Chevrolet C10, black (includes grille (upper & lower), headlight housings (left & right), bumpers (front & rear), mou...
View full detailsBody Accessories, Chevrolet C10, Satin Black Chrome (Includes Grille (Upper and Lower), Headlight Housings (Left and Right), Bumpers (Front and Rear), Mounting Retainers And Hardware)
TraxxasBody Accessories, Chevrolet C10, Satin Black Chrome (includes Grille (upper and Lower), Headlight Housings (Left and Right), Bumpers (front and Rea...
View full detailsBody Post, Rear/ Body Washers, Foam (2)/ Pivot (2)
TraxxasBody post, rear/ body washers, foam (2)/ pivot (2)
Spring Retainer (adjuster), Blue-Anodized Aluminum, GT-Maxx® Shocks (4) (assembled with O-ring
TraxxasSpring retainer (adjuster), blue-anodized aluminum, GT-Maxx® shocks (4) (assembled with o-ring)
Mirrors, Side, Chrome (Left and Right)/ O-Rings (4)/ Body Clips (4) (Fits #9111 Body)
TraxxasMirrors, Side, Chrome (Left and Right)/ O-Rings (4)/ Body Clips (4) (fits #9111 Body)
Wheel washers, green (4)
TraxxasWheel washers, green (4)
Hardware Kit, Black Stainless Steel, TRX-4® Traxx® (contains All Stainless Steel Hardware Used on #8880 TRX-4® Traxx®)
TraxxasHardware kit, black stainless steel, TRX-4® Traxx® (contains all stainless steel hardware used on #8880 TRX-4® Traxx™)
Stub Axle Nut, Aluminum (Red-Anodized) (4)
TraxxasStub axle nut, aluminum (red-anodized) (4)
Housing, center differential/ x-ring gaskets (2)/ 5x10x0.5 PTFE-coated washer (1)/ 2.5x10 CCS (4)
TraxxasHousing, center differential/ x-ring gaskets (2)/ 5x10x0.5 PTFE-coated washer (1)/ 2.5x10 CCS (4)
Suspension Pin Set, Rear (Left Or Right) (hardened Steel), 4x64mm (1), 4x38mm (1), 4x33mm (1), 4x47mm (1)
TraxxasSuspension pin set, rear (left or right) (hardened steel), 4x64mm (1), 4x38mm (1), 4x33mm (1), 4x47mm (1)
Spring Retainer (adjuster), Orange-Anodized Aluminum, GT-Maxx® Shocks (4) (assembled with O-ring)
TraxxasSpring retainer (adjuster), orange-anodized aluminum, GT-Maxx® shocks (4) (assembled with o-ring)
Wheel washers, red (4)
TraxxasWheel washers, red (4)
Servo Horn (with Built-in Spring and Hardware) (for 6X6 Locking Differential)
TraxxasServo horn (with built-in spring and hardware) (for TRX-6™ locking differential)
Drive cup (1)/ 4x15.8mm screw pin (1) (for #8950X or 8996X steel CV driveshafts)
TraxxasDrive cup (1)/ 4x15.8mm screw pin (1) (for #8950X or 8996X steel CV driveshafts)
Driveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) (for use with #8995 WideMaxx™ suspension kit)
TraxxasDriveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) (for use with #8995 WideMaxx™...
View full detailsDriveshaft, Center, Steel (278mm)/ Pin/ Support, Center Driveshaft/ 5x11x4 Bearing
TraxxasDriveshaft, center, steel (278mm)/ pin/ support, center driveshaft/ 5x11x4 bearing
Mirrors, Side, Black (Left and Right)/ O-Rings (4)/ Windshield Wipers, Left, Right, and Rear/ Wiper Retainers (2)/ Body Clips (4)/ 1.6X5 Bcs (Self-Tapping) (3)
TraxxasMirrors, Side, Black (Left and Right)/ O-Rings (4)/ Windshield Wipers, Left, Right, and Rear/ Wiper Retainers (2)/ Body Clips (4)/ 1.6x5 BCS (self-...
View full detailsDouble Seal Kit, GTR Shocks (x-rings (4)/ 4x6x0.5mm PTFE-coated Washers (2)/ Bottom Caps (2)) (renews 2 Shocks)
TraxxasDouble seal kit, GTR shocks (x-rings (4)/ 4x6x0.5mm PTFE-coated washers (2)/ bottom caps (2)) (renews 2 shocks)
Bumper, front, winch, medium (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® 1979 Bronco and 1979 Blazer with 8855 winch) (217mm wide)
TraxxasBumper, front, winch, medium (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® 1979 Bronco and 1979 Blazer with 8855 winch) (217mm ...
View full detailsCarrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 PTW
TraxxasCarrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 PTFE-coated washer (1)