Hardware

Gear, 9-T pinion / set screw

Driveshaft, steel constant-velocity, 1/16 E-Revo® (shaft only, 68mm)/ drive cup pin (1)

Yokes, differential and transmission (2)/ 3x10mm screw pin (2)

Gear set, differential (output gears (2)/ spider gears (3))/ differential output shafts (2)/ 1.5x6mm pin (3)/ 1.5x8mm pin (2)

Rocker arm set, progressive-2/ plastic bushings (8)

Housing, center differential/ x-ring gaskets (2)/ ring gear gasket/ bushings (2)/ 5x10x0.5 TW (2)/ CCS 2.5x8 (4)

Differential output yokes, heavy duty (2)/ screw pin (2)

Hold down, battery (2)/ hold down retainer/ battery post/ angled body clip

Driveshaft assembly (1) left or right (fully assembled, ready to install)/ 3x10mm screw pin (1)

Suspension pin set (front or rear), 2x46mm (2), 2x14mm (4)

Driveshaft assembly (1) left or right (1/16 Slash) (fully assembled, ready to install)/ 3x10mm screw pin (1)

Input shaft (slipper shaft)/ bearing adapter (1)/ pin (1)

Driveshaft, center, plastic, (black)/ screw pin

Stub axles, rear, heavy duty (2)/pins (2)

Battery hold-down (3)/ battery clip/ hold-down post/ screw pin/ pivot post screw (fits #6723R chassis with 162mm long battery compartment)

Suspension arm guards, rear (2)/ guard spacers (2)/ hollow balls (2)/ 3X16mm BCS (8)

Stub axles, front, heavy duty (2)/ yokes (2)/ pins (4)

Driveshaft assembly, front, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 18-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 22-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 13-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 14-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip

Wheel nut washer, machined aluminum, green / 3x12mm CS (4)

Spacer, battery compartment (2)/ foam blocks (4)/ foam pad (2)®®

Wheel nut washer, machined aluminum, orange / 3x12mm CS (4)

Body clips (12)

Pivot balls: black (6), silver (2), black (long) (2)

Cover plates, differential (front or rear)/ gaskets (2)/ o-rings (2)/ 2x14mm BCS (4)

Rocker arm set, long travel/ plastic bushings (8)

Gear, 18-T pinion (48-pitch, 2.3mm shaft)/ set screw

Gear, 10-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw

Gear, 11-T pinion (32-p) (steel) (fits 3mm shaft)/ set screw

Gear, 29-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw

Gear, 26-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw

Gear, 13-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Engine mount/ engine mount spacers (2)/ 3x15 CS with washers (4)/ 4x18 BCS (2)/ flat-head engine mount screws 3x10 (2)

Screws, 1.6x5mm button-head, self-tapping (hex drive) (6)

Gear, 11-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Nuts, 4mm flanged (10)