Filter
Hardware
Primary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)
TraxxasPrimary gears: forward (28-T)/ reverse (22-T)/ set screw yoke pin, M3/12 (1)/ 5x10x0.5mm PTFE-coated washer (1)
Differential gear (45-tooth)/ side cover plate & screws
TraxxasDifferential gear (45-tooth)/ side cover plate & screws
Suspension pin set (front or rear, hardened steel), 3x20mm (4), 3x40mm (2))
TraxxasSuspension pin set (front or rear, hardened steel), 3x20mm (4), 3x40mm (2))
Body clip (mounting clip), angled, 90-degrees (black) (10)
TraxxasBody clip (mounting clip), angled, 90-degrees (black) (10)
Carrier, differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 metal washer
TraxxasCarrier, differential (aluminum)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 metal washer
Head screws, 3x12mm cap-head machine (hex drive) (6) (TRX 2.5, 2.5R, 3.3)
TraxxasHead screws, 3x12mm cap-head machine (hex drive) (6) (TRX® 2.5, 2.5R, 3.3)
Shim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
TraxxasShim set, 3x7x1mm (2), 3x6x0.5mm (4), 3x7x2mm (2)/ hollow balls, captured (4)
Battery hold-down/ battery clip/ hold-down post/screw pin (for 256mm wheelbase)
TraxxasBattery hold-down/ battery clip/ hold-down post/ screw pin/ pivot post screw (for 256mm wheelbase)
Screws, 4x15mm roundhead machine (6)
TraxxasScrews, 4x15mm roundhead machine (6)
Spur gear (70-Tooth) (32-Pitch) w/bushing
TraxxasSpur gear (70-tooth) (32-Pitch) w/bushing
Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ T-Maxx® filter base (angled)/ wire mount/ hardware (1 each) (Fits Maxx® trucks) (TRX® 2.5, 2.5R, 3.3)
TraxxasAir filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ T-Maxx® filter base (angled)/ wire mount/ hardware (1 each) (Fits Maxx...
View full detailsSuspension screw pin set, steel (hex drive) (requires part #2640 for a complete suspension pin set) (Bandit, Rustler®, Stampede®)
TraxxasSuspension screw pin set, steel (hex drive) (requires part #2640 for a complete suspension pin set) (Bandit®, Rustler®, Stampede®)
Screws, 2.5x8mm button-head machine (hex drive) (6)
TraxxasScrews, 2.5x8mm button-head machine (hex drive) (6)
Input gear, transmission, 22-tooth/ 2.5x12mm pin
TraxxasInput gear, transmission, 22-tooth/ 2.5x12mm pin
Rod ends (4) (assembled with steel pivot balls)
TraxxasRod ends (4) (assembled with steel pivot balls) (replacement ends for #8547A, 8547R, 8547X, 8948A, 8948G, 8948R, 8948X, 8997A, 8997G, 8997R, 8997X)
Wheel washers, orange (4)
TraxxasWheel washers, orange (4)
Tailgate protector, red/ 3x15mm flat-head screw (4)
TraxxasTailgate protector, red/ 3x15mm flat-head screw (4)
Mirrors, side, black (left & right)/ retainers (2)/ body clips (4)
TraxxasMirrors, side, black (left & right)/ retainers (2)/ body clips (4) (fits #8010 or 9230 series bodies)
Plate, Motor, Green (4Mm Thick) (Aluminum)/ 3X10Mm Cs with Split And Flat Washer (2)
TraxxasPlate, Motor, Lightweight machined 6061-T6 Aluminum (green-Anodized) (4mm thick)/ 3x10mm CS with Split and Flat Washer (2)
Spacers (4)/ grip pads (3)/connector dust cover (1) (for TQi docking base)
TraxxasBulkhead, front/ tie bar bushings (2)
TraxxasBulkhead, front/ tie bar bushings (2)
Gear, 34-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
TraxxasGear, 34-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
Spacers, stub axle carrier (rear)
TraxxasSpacers, stub axle carrier (rear)
Gear set, 2-speed standard ratio (2nd speed gear 39T, 13T-17T input gears, hardware)
TraxxasGear set, 2-speed standard ratio (2nd speed gear 39T, 13T-17T input gears, hardware)
Screws, 2.6x5mm button-head, self-tapping (hex drive) (6)
TraxxasScrews, 2.6x5mm button-head, self-tapping (hex drive) (6)
Driveshaft, steel constant-velocity, Jato (shaft only)/ drive cup pin (1)
TraxxasHardware Kit, Stainless Steel, Beadlock Rings (contains Stainless Steel Hardware For 4 Wheels)
TraxxasHardware kit, stainless steel, beadlock rings (contains stainless steel hardware for 4 wheels)
Screws, 2.6x8mm button-head, self-tapping (hex drive) (6)
TraxxasScrews, 1.6x5mm button-head machine (hex drive) (6)
TraxxasScrews, 1.6x5mm button-head machine (hex drive) (6)
Body clips, heavy duty (12)
TraxxasBody clips, heavy duty (12)
Body accessories kit, Bigfoot® No. 1 (includes winch, front and rear bumpers, roll bar, light bar, engine detail, & mounting hardware) (grille sold separately)
TraxxasBody accessories kit, Bigfoot® No. 1 (includes winch, front and rear bumpers, roll bar, light bar, engine detail, & mounting hardware) (grille ...
View full detailsSuspension pins, font & rear (4)/ tie bar bushings
TraxxasSuspension pins, front & rear (4)/ tie bar bushings (2)
Shaft, slipper clutch (w/ roll pin)
TraxxasShaft, slipper clutch (w/ roll pin)
Spur gear (72-Tooth) (32-pitch) w/bushing
TraxxasSpur gear (72-Tooth) (32-pitch) w/bushing
Driveshaft, Center, Steel (266mm)/ Pin/ Support, Center Driveshaft/ 5x11x4 Bearing
TraxxasDriveshaft, center, steel (266mm)/ pin/ support, center driveshaft/ 5x11x4 bearing
Tailgate Protector/ 3x10mm Flat-head Screw (3)
TraxxasTailgate protector/ 3x10mm flat-head screw (3)
Cross pin (2)/ drive pin (2) (to rebuild front axle shafts)
TraxxasCross pin (2)/ drive pin (2) (to rebuild front axle shafts)
Installation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Chevrolet Blazer (1969 & 1972) (includes mount, reverse lights and turn signal harnesses, hardware)
TraxxasInstallation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Chevrolet Blazer (1969 & 1972) (includes mount, reverse lights and turn s...
View full detailsInstallation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Sport (includes mount, rear lens, reverse lights and turn signal harnesses, hardware)
TraxxasInstallation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Sport (includes mount, rear lens, reverse lights and turn signal harnesses, h...
View full detailsTail lights (2)/ tail light mounts (4) / exhaust tips (2)/ exhaust tip mount (1)/ 3x10 flathead screws (2)/ 3x8 BCS (2)
TraxxasTail lights (2)/ tail light mounts (4) / exhaust tips (2)/ exhaust tip mount (1)/ 3x10 flat-head screws (2)/ 3x8 BCS (2)
Screws, 2x10mm cap-head, self-tapping (hex drive) (10)
TraxxasScrews, 2x10mm cap-head, self-tapping (hex drive) (10)
Axle shaft, rear, steel/ e-clips (4)
TraxxasDriveshaft, steel constant-velocity (shaft only, 48mm)/ drive cup pin (1)
TraxxasDriveshaft, steel constant-velocity, 1/16 Slash (shaft only, 48mm)/ drive cup pin (1)
Hardware kit, stainless steel, Spartan/DCB M41 (contains all stainless steel hardware used on Spartan and DCB M41)
TraxxasHardware kit, stainless steel, Spartan/DCB M41 (contains all stainless steel hardware used on Spartan and DCB M41)
Main frame, side plate, outer (2) (red-anodized) (aluminum)/ screws (6)
TraxxasMain frame, side plate, outer (2) (red-anodized) (aluminum)/ screws (6)
BODY CLIP RETAINER, RED (4)
TraxxasBody clip retainer, red (4)
Brake pads (2)/ brake piston/ 3x15mm cap hex screws (2)
TraxxasBrake pads (2)/ brake piston/ 3x15mm cap hex screws (2)
Primary gears, forward and reverse/ 2x11.8mm pin/ pin retainer/ disc spring
TraxxasPrimary gears, forward and reverse/ 2x11.8mm pin/ pin retainer/ disc spring