Hardware

Cross pin (2)/ drive pin (2) (repairs 1 axle shaft)

Drive hub, front (1)/ 3x10 screw pin (1)

Servo horn, steering/ linkage, steering (46mm, assembled with pivot balls)

Suspension pins, lower, inner (front or rear), 4x64mm (2) (hardened steel) Pair of 4x64 mm hardened steel inner lower suspension pins. Fits front o...

Suspension pin set, front (left or right) (hardened steel), 4x64mm (1), 4x22mm (2), 4x38mm (1), 4x33mm (1), 4x47mm (1)

Driveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Bumper, front, winch, TRX-4® Sport (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® Sport with 8855 winch) (191mm wide)

Housing, spool / spool shaft/ bushing

Drive cup, machined steel (2)/ 4x17mm screw pins (2)

Suspension pin set (front) (3x51mm (2), 3x54mm (2), 3x93mm (2))

Nuts, 5mm flanged nylon locking (aluminum, black-anodized, serrated) (4)

Driveshafts, center front/ 4mm screw pin (1)/ 3x10 CS (1)

Suspension pin set, complete (front & rear)

Ultra Shocks (gray) (short) (includes spring pre-load spacers) (2)

Spool/ differential housing plug/ e-clip/ 2.5x8mm BCS (with threadlock) (4)

Drive cups, inner (2)/ screw pins (2)

Screws, 2.6x12mm button-head, self-tapping (hex drive) (6)

Driveshaft, center, aluminum / pin

Nuts, 4mm flanged nylon locking, serrated (black) (10)

Suspension pins, 4x85mm (hardened steel) (2)

Battery plate/ battery strap/ 3x8 flat-head screws (4) (requires #8072 inner fenders)

Servo horn (with built-in spring and hardware) (for TRX-6™ locking differential)

Drive cup (1)/ 4x15.8mm screw pin (1) (for #8950X or 8996X steel CV driveshafts)

Driveshaft assembly, front or rear, Maxx® Duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1) (for use with #8995 WideMaxx™...

Driveshaft, center, steel (278mm)/ pin/ support, center driveshaft/ 5x11x4 bearing

Mirrors, Side, Black (Left and Right)/ O-Rings (4)/ Windshield Wipers, Left, Right, and Rear/ Wiper Retainers (2)/ Body Clips (4)/ 1.6x5 BCS (self-...

Double seal kit, GTR shocks (x-rings (4)/ 4x6x0.5mm PTFE-coated washers (2)/ bottom caps (2)) (renews 2 shocks)

Bumper, front, winch, medium (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® 1979 Bronco and 1979 Blazer with 8855 winch) (217mm ...

Carrier, differential (heavy duty)/ x-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 PTFE-coated washer (1)

Driveshaft, center, steel/ pin

Piston, damper (red) (4)/ e-clips (8)

Portal drive input gear, front/ drive pin/ cross pin

Bumper mounts, front & rear/ screw pins (4)

Steering bellcranks/ hardware

Body washers, foam

Battery hold-down/ battery clip/ hold-down post/ foam spacer/ screw pin (for 288mm wheelbase)

Traction boards, green/ mounting hardware

Installation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Chevrolet Blazer (1979) (includes mount, reverse lights harness, hardware)

Tailgate panel/ tailgate retainers (2)/ tailgate mount/ tail light lens (2) (left & right)/ 2.5x8 BCS (4) (fits #8111 or #8112 body)

Spare tire mount/ mounting hardware

Fender extensions (4)/ 3x8 flat-head screws (24) (requires #8080 narrow inner fenders)

Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8111 or #8112 body)

Fenders, inner, front & rear (2 each)/ rock light covers (8)/ battery plate/ 3x8 flat-head screws (4)

Traction boards/ mounting hardware