Hardware

Caster spacers (4)/ shims (4)

Screws, 2.5x10mm countersunk machine (hex drive) (6)

Diff gear set: 13-T output gear shafts (2)/ 13-T spider gears (2)/ spider shaft (1)/ 6x10x0.5mm PTFE-coated washer (1)

Servo horn (with built-in spring and hardware) (for Summit locking differential)

U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm cross pin (4)/ e-clips (20)) (metal parts for 2 driveshafts)

Driveshaft, steel constant-velocity, 1/16 Slash (shaft only, 48mm)/ drive cup pin (1)

Hardware kit, stainless steel, Spartan/DCB M41 (contains all stainless steel hardware used on Spartan and DCB M41)

Main frame, side plate, outer (2) (red-anodized) (aluminum)/ screws (6)

Body clip retainer, red (4)

Brake pads (2)/ brake piston/ 3x15mm cap hex screws (2)

Primary gears, forward and reverse/ 2x11.8mm pin/ pin retainer/ disc spring

Gear, 14-T pinion (0.8 metric pitch, compatible with 32-pitch) (hardened steel) (fits 5mm shaft)/ set screw

Aluminum caps, pivot ball (4)

Spur gear (78-tooth) (48-pitch) w/bushing

Tool set

Grille, Mercedes-Benz® G 500® 4x4®/ grille mount/ grille insert/ headlight lens (2)/ headlight reflector (2)/ reflector lens (2)/ bumperette front ...

Spool/ spacers (left & right)/ 2.5x8 CS (4)

Mirrors, Side, Chrome (Left and Right)/ O-Rings (4)/ Body Clips (4) (fits #9112 Body)

Bumper, front, winch, narrow (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® Land Rover® Defender® and Tactical Unit with 8855 wi...

Spider gear shaft (2)/ spider bushing (4)

Rotor blade set, white (2) (with screws)

Overview FURITEK high quality Futaba J Male is designed to support plug and play functionality of any Furitek Esc connection to any Receiver ...

Spare tire mount/ mounting bracket/ spare tire cover/ mounting hardware

Gear, 15-T pinion (48 pitch, 2.3mm shaft)/ set screw

Installation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Ford Bronco (1979) or Chevrolet K10 Truck (1979) (includes mount, reverse lig...

Driveshaft, center, aluminum / pin

Shovel/ axe/ accessory mount/ mounting hardware

Rotor blade set, red (2) (with screws)

Main gear, lower (1) (for inner main shaft)/ bushing (1)/ screws (2)

Belleville washers (complete set with nut)

Input shaft (slipper shaft)/ slipper shaft spacer

Differential output yokes (2)/yoke pins M3/12.5 (2)

Wing mounting hardware, (4x8mmCCS (aluminum)(3)/ 4x7mm flanged NL (3))

Drive cups, inner (2) Revo®/ E-Revo® (first generation)/ T-Maxx®/ E-Maxx (steel constant-velocity driveshafts)/ screw pin, M4/15 (2)

Set screw, throttle 3x15 (1)

Hatch post/hull water outlet/foam pads (10)/ washer (1)/ 4x8mm BCS, stainless steel/ 3x4mm BCS, stainless steel