Kit

Mount, telemetry expander (requires #6730 chassis brace kit)

Rebuild kit (for Revo®/E-Revo® (first generation)/T-Maxx®/E-Maxx steel constant-velocity driveshafts) (includes pins, dustboots, & lube for 2 d...

Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

Rebuild kit, 2200Kv motor, brushless (includes plastic endbell, 5x16x5mm ball bearings (2), 5.05x7.5x.05 washer (1), 5.05x7.5x0.1 washer (1), 5.05x...

Rebuild kit, 2000Kv motor, brushless (includes plastic endbell, 5x16x5mm ball bearings (2), 5.05x7.5x.05 washer (1), 5.05x7.5x0.1 washer (1), 5.05x...

Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for #9550 front or #9654X rear steel CV driveshafts)

Rebuild kit, Velineon® 1200XL (includes plastic endbells (2), 6x17x6mm ball bearings (2), 6x8x.3 washer (1), 6x8x1 washer (1), 7x6x12 spacer (1))

Rebuild kit, center differential (1/16 E-Revo/Slash) (includes o-rings and diff gear covers)

Rebuild kit, fuel tank (includes: mounting post, grommets (2), tank guard, mounting clips (2), cap o-ring, cap o-ring retainer, cap pull ring (2), ...

Rebuild kit, GT-Maxx® shocks (lower cartridge, pistons, piston nuts, bladders, screws) (renews 2 shocks)

Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks)

Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks)

Rebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks

Rebuild kit, GTR shocks (x-rings, bladders, pistons, piston nuts, shock rod ends) (renews 2 shocks)

Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)

Rebuild kit, oil-filled shocks (o-ring, bladder, piston, shaft guide, E-clips, shock cap, shock rod end) renews 2 shocks

Rebuild kit, slipper clutch (steel disc (2)/ friction insert (2)/ 4.0mm NL (1)/ spring washers (4), metal washer (1))

Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (2)/ pin/ 4.0mm NL (1)/ 5.0mm NL (1))

Rebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)

Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for use only with #7750X driveshaft)

Rebuild kit (for 1/16 E-Revo/Slash steel constant-velocity driveshafts) (includes pins, o-rings, stub axles for driveshafts assemblies)

Rebuild kit, steel-splined constant-velocity driveshafts (includes pins and hardware for one axle shaft)

Rebuild kit, steel-splined constant-velocity driveshafts (includes pins, dustboots, lube, and hardware)

Shock rebuild kit (for 2 shocks)

Rebuild kit, Velineon® 3500 and 540XL (includes plastic endbell, 5x11x4mm ball bearings (2), 2.5x5mm BCS (with threadlock) (4), rear bushing)

Shock tower, rear, extreme heavy duty, red (for use with #9080 upgrade kit)

Rod ends, extended (standard (4), angled (4))/ hollow balls (8) (for use with TRX-4® Long Arm Lift Kit)

Screw pins, 3x16mm, extreme heavy duty (6) (for use with #9080 upgrade kit)

Seal kit, receiver box (includes o-ring, seals, and silicone grease)

Seal kit, receiver box (includes o-ring, seal, and silicone grease)

Seal kit, receiver box (includes o-ring, seals, and siliconee grease)

Servo mount, steering (for use with TRX-4® Long Arm Lift Kit)

Body, GTM shock, 6061-T6 aluminum (blue-anodized) (includes spring pre-load spacers) (2) Give your TRX-4M™ a custom look with these colorful GTM sh...

Rebuild kit, GTM shock (o-rings, spacers, bladders, bottom caps) (renews 2 shocks)

Rebuild Kit, GTX Shocks (lower Cartridge, Assembled, Pistons, Piston Nuts, Bladders) (renews 2 Shocks)

Clipless ProGraphix® Painted Body Pre-painted body with applied decals Scale dimensions and looks of actual short course race trucks Chassis ner...

Clipless ProGraphix® Painted Body Pre-painted body with applied decals Scale dimensions and looks of actual short course race trucks Chassis ner...

Springs, shock, long (natural finish) (GTS) (0.29 rate, white stripe) (for use with TRX-4® Long Arm Lift Kit)

Springs, shock, long (natural finish) (GTS) (0.39 rate, orange stripe) (for use with TRX-4® Long Arm Lift Kit)

Springs, shock, long (natural finish) (GTS) (0.47 rate) (included with TRX-4® Long Arm Lift Kit)

Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)

Springs, shock, long (natural finish) (GTS) (0.62 rate, blue stripe) (for use with TRX-4® Long Arm Lift Kit)

Ultimate 4-Wheel-Drive Brushless Basher Monster Truck The Traxxas Stampede 4X4 BL-2s Brushless 1/10 RTR Monster Truck is the next level of RC bashi...

Steering Blocks, Extreme Heavy Duty, Black (Left and Right)/ 3x20mm BCS (2) (for Use with #9080 Upgrade Kit)