Filter
Model
Body mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x8mm CS (2)/ 3x15mm flat-head machine screw (9)
TRAXXASBody mounts, front & rear/ 3x12mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (9) Front and rear Maxx® body mounts with ...
View full detailsBulkhead, front (upper) XRT
TRAXXASBulkhead, front (upper) Replacement front upper bulkhead Replacement part for these models: X-Maxx® X-Maxx®: TQi™ Traxxas Link™ Enabled 2.4GHz ...
View full detailsBulkhead, rear (upper) (fits X-Maxx® 8s or XRT™)
TRAXXASBulkhead, rear (upper) (fits X-Maxx® 8s or XRT®) Rear upper bulkhead fits 8s X-Maxx® and XRT® Replacement part for these models: XRT® XRT®: TQi...
View full detailsBUMPER MOUNT REAR
TRAXXASBumper mount, rear Rear bumper mount Replacement part for these models: XRT®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 78086-4)
Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS ...
View full detailsCarriers, stub axle (rear) (left & right)
TRAXXASCarriers, stub axle (rear) (left & right) These left and right rear stub axle carriers were redesigned and beefed-up for XRT®. Standard in XRT,...
View full detailsCaster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right
TRAXXASCaster blocks (c-hubs), 6061-T6 aluminum (green-anodized), left & right Left and right green aluminum caster blocks improve the appearance, rug...
View full detailsCASTER BLOCKS GREEN L&R
TRAXXASCaster blocks (c-hubs), extreme heavy duty, green (left & right)/ 3x32mm hinge pins (2)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replac...
View full detailsChassis brace kit, orange (fits Rustler® 4X4 or Slash 4X4 models equipped with Low-CG chassis)
TRAXXASChassis Brace Kit, Orange (fits Rustler® 4X4 Or Slash® 4X4 models Equipped with Low-CG Chassis)
Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) (13/37 ratio)
TraxxasDifferential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®)...
View full detailsDRIVE CUP F/R HARDENED
TRAXXASDrive cup, front or rear (hardened steel) (for differential pinion gear)/ driveshaft boots (2)/ boot retainers (2) Pair of replacement differential...
View full detailsDRIVESHAFTS CNTR MALE BLUE
TRAXXASDriveshafts, center, male (steel) (4)/ driveshafts, center, female, 6061-T6 aluminum (blue-anodized) (front & rear)/ 1.6x7mm BCS (with threadlo...
View full detailsHARDWARE KIT COMPLETE
TRAXXASHardware kit, complete (contains all hardware used on 1/18-scale TRX-4M™) (includes clear plastic storage container)Give your TRX-4M™ a complete re...
View full detailsSHOCK ASSM W/O SPRINGS
TRAXXASShocks, GTM (assembled w/o springs) (2) Replacement part for these models: TRX-4M™ 1/18 Ford® Bronco® TRX-4M™ 1/18 Ford® Bronco® (Model# 97074-1...
View full detailsSHOCK BODY BLUE
TRAXXASBody, GTM shock, 6061-T6 aluminum (blue-anodized) (includes spring pre-load spacers) (2) Give your TRX-4M™ a custom look with these colorful GTM sh...
View full detailsSpur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
TRAXXASSpur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)
STEERING BLOCKS GREEN L&R
TRAXXASSteering blocks, extreme heavy duty, green (left & right)/ 3x20mm BCS (2) (for use with #9080 upgrade kit) Replacement left and right steering ...
View full detailsSteering blocks, 6061-T6 aluminum (green-anodized), left & right
TRAXXASSteering blocks, 6061-T6 aluminum (green-anodized), left & right Traxxas aluminum steering blocks combine total steering accuracy with bulletpr...
View full detailsSteering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)
TRAXXASSteering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum steering blocks impro...
View full detailsSUSP LINK SET COMPLETE ASSM
TRAXXASSuspension link set, complete (front & rear) (includes steering link (1), front lower links (2), front upper links (2), rear links (4)) (assemb...
View full detailsWinch kit with wireless controller, TRX-4® and TRX-6®
TraxxasPro Scale® Remote Operated Winch for TRX-4 and TRX-6Powerful, Realistic Winch Capability for Traxxas TRX-4 and TRX-6The new Pro Scale Winch puts th...
View full detailsX-Maxx® WideMaxx® Kit
TRAXXASX-Maxx® WideMaxx® KitA Tougher, Wider StanceThe Traxxas X-Maxx is a new breed of monster truck with a tough-as-nails attitude, brutal power, and un...
View full detailsXRT Bulkhead, Front (lower)
TRAXXASBulkhead, front (lower) Replacement XRT® front lower bulkhead Replacement part for these models: XRT® XRT®: TQi™ Traxxas Link™ Enabled 2.4GHz Ra...
View full detailsXRT SHOCK TOWER FRONT L/R HALVES
TRAXXASShock tower, front (left & right halves) Left and right front shock tower halves Replacement part for these models: XRT® XRT®: TQi™ Traxxas ...
View full details