Filter
Parts & Upgrades
Driveshaft, center, 6061-T6 aluminum (green-anodized)
TraxxasDriveshaft, center, 6061-T6 aluminum (green-anodized)
Differential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash, Stampede®, Rustler®) (13/37 ratio)
TraxxasDifferential, front (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®)...
View full detailsWheel hubs, splined, 17mm, short (4)/ wheel nuts, splined, 17mm (4) (blue-anodized)/ hub retainer M4 X 0.7 (4)/ axle pin (4)/ wrench, 5mm
TraxxasWheel hubs, splined, 17mm, short (blue-anodized) (4)/ wheel nuts, splined, 17mm (blue-anodized) (4)/ hub retainer M4 X 0.7 (4)/ axle pin (4) (Slash...
View full detailsTREAL Losi Promoto MX Aluminum 7075 Swing Arm CNC Billet Machined Green LOS264000
TrealBulkhead tie bars, front & rear, aluminum (blue-anodized)
TraxxasBulkhead tie bars, front & rear, aluminum (blue-anodized)
Housings, differential, front
TraxxasHousings, differential, front
Chassis Stampede 4x4
TraxxasChassis, Stampede® 4x4
CHASSIS ALUMINUM BLUE 1/8 SLEDGE
TraxxasChassis, aluminum (blue-anodized)
Steering blocks, 6061-T6 aluminum (green-anodized), left & right
TraxxasSteering blocks, 6061-T6 aluminum (green-anodized), left & right Traxxas aluminum steering blocks combine total steering accuracy with bulletpr...
View full detailsTeam Associated Slipper Pads V2
Team AssociatedSlipper Pads, V2, for B6.1/ DR10
Bulkheads (l & r) (front) (gray)
TraxxasBulkheads (l & r) (front) (grey)
Skid plate, roof (body) (orange)/ 3x12 CS (4)
TraxxasSkid plate, roof (body) (orange)/ 3x12 CS (4)
Wheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4)
TraxxasWheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4)
Team Associated Ball Cups & Steering Link Set
Team AssociatedJConcepts B6.1/B6.1D Aluminum "C" Mount (Blue)
JConceptsTeam Associated RC10B6.3 Tower Covers, Wire Clips & Rod Ends
Team AssociatedThis part fits the following vehicles:RC10B6.3RC10B6.3D
Rear CVA Bones 65mm: B5, B5M, B6, B6D, B64, B64D
Team AssociatedRear CVA Bones, 65mm, for DR10, RB10, RC10, SR10
LED light set, complete (includes bumper with LED lights, roof skid plate with LED lights, 3-volt accessory power supply, and power tap connector (with cable)) (fits #6717 body)
TraxxasRustler 4X4 LED Light KitBuilt Traxxas Tough™The Traxxas Rustler 4X4 takes stadium truck performance to new heights. The all-new High-Output Off Ro...
View full detailsSuspension arms (upper) (2) (fits T-Maxx®/E-Maxx)
TraxxasSuspension arms (upper) (2) (fits T-Maxx®/E-Maxx)
AZTAB Metal Center Drive Shafts for SCX24 ( Deadbolt, Betty)
AZ Turn & Burn RCProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear (5.0mm Bore) (22T)
ProTek RCSpur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)
TraxxasSpur gear, 54-tooth (0.8 metric pitch, compatible with 32-pitch)
Team Associated 12mm V2 Big Bore Shock Rebuild Kit
Team Associated12mm V2 Shock Rebuild
Shock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
TraxxasShock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
Driveshafts, rear, steel-spline constant-velocity (complete assembly) (2) (fits 2WD Rustler/Stampede)
TraxxasDriveshafts, rear, steel-spline constant-velocity (complete assembly) (2) (fits 2WD Rustler®/Stampede®)
Phone mount, transmitter (fits TQi and Aton® transmitters)
TraxxasPhone mount, transmitter (fits TQi and Aton® transmitters)
Chassis, +4mm, 2mm Plate: 22 5.0
Horizon HobbyFeatures The +4mm longer chassis will be smoother and less twitchy on entry, carry more mid-corner speed, and have ...
View full detailsRPM Traxxas Slash Front Bumper & Skid Plate (Chrome)
RPMFront Bumper & Skid Plate, for Traxxas Slash/Nitro Slash, Chrome
Gear adapter, fixed
TraxxasGear adapter, fixed
Turnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
TraxxasTurnbuckles, camber link, 39mm (69mm center to center) (assembled with rod ends and hollow balls) (1 left, 1 right)
RC10B6.2 CVA bone (69mm)
Team AssociatedRC10B6.2 CVA Bone (69mm)
PROMOTO-MX MOTORCYCLE Aluminum 7075 Front Bulkhead (BLUE) LOS261012
Gpm RcBALL DIFF for 2.6 TRANS
Custom WorksSpur gear, 36-tooth (1.0 metric pitch)
TraxxasSpur gear, 36-tooth (1.0 metric pitch)
Rear Driveshaft Set: SBR 2.0
LosiShock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
TraxxasShock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
Team Associated 3x35mm Shock Shaft (2)
Team AssociatedBillet Stage 1 Conversion for Traxxas 1/10 Rustler 2WD, Stampede 2WD & Slash 2WD
IntegyWing (exocarbon)/ wing mounts (2)/ washers (2)
TraxxasWing (exocarbon)/ wing mounts (2)/ washers (2)
Billet Machined Front Bumper Brace for Axial 1/24 SCX24 C10
IntegyChassis, Slash 4X4
TraxxasChassis, Slash 4X4
Tamiya TT-02 B Parts Set
TamiyaThese are the B-parts to the TT-02 chassis platform. They contain the suspension arms as well as other wear items.Item contains B parts (Suspension...
View full detailsFront Upper Arms, Arms Holder
Redcat RacingFront Upper Arms, Arms Holder
Chassis brace kit, orange (fits Rustler® 4X4 or Slash 4X4 models equipped with Low-CG chassis)
TraxxasChassis Brace Kit, Orange (fits Rustler® 4X4 Or Slash® 4X4 models Equipped with Low-CG Chassis)
Discount -Idler Gear Shaft For KIT-MINI MG
3RACINGTREAL SCX24 Axle Diff Cover Aluminum 7075 (2P) for Axial SCX24 Deadbolt C10 Gladiator Bronco Color: Purple
TrealTeam Associated Hinge Pin Set
Team AssociatedTeam Associated - ASC91394The Hinge Pin Set: B5, B5M, SC5M, T5M by Team Associated is a quality built accessory.