Filter
Parts & Upgrades
Carrier, differential/ differential slider/ T-Lock fork
TraxxasCarrier, differential/ differential slider/ T-Lock fork
Flywheel (large, knurled for use with starter boxes)
TraxxasFlywheel (large, knurled for use with starter boxes)
Shock tower, rear, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)
TraxxasShock tower, rear, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)
Chassis tray/ driveshaft clamps/ fuel filler (black)
TraxxasChassis tray/ driveshaft clamps/ fuel filler (black)
Bulkhead, front
TraxxasBulkhead, front
Springs, front (progressive, -10% rate, green) (2)
TraxxasSprings, front (progressive, -10% rate, green) (2)
Sun gear, planetary (center)
TraxxasSun gear, planetary (center)
Cover, gear/ 3x12mm CS (1)
TraxxasCover, gear/ 3x12mm CS (1)
Gear, center differential, 55-tooth (spur gear)
TraxxasGear, center differential, 55-tooth (spur gear)
Spring, shock, 139mm (natural finish) (GTR) (progressive, 0.937 rate, orange stripe) (2)
TraxxasSpring, shock, 139mm (natural finish) (GTR) (progressive, 0.937 rate, orange stripe) (2)
Sold out
Pinion gear, differential, 13-tooth (rear) (use with #7779 42-tooth differential ring gear)
Pinion gear, differential, 13-tooth (rear) (use with #7779 42-tooth differential ring gear)
TraxxasPinion gear, differential, 13-tooth (rear) (use with #7779 42-tooth differential ring gear)
Bumpers, front (1)/ rear (1)
TraxxasBumpers, front (1)/ rear (1)
Carriers, stub axle (2)
TraxxasCarriers, stub axle (2)
HOLLOW BALLS (20)
TraxxasHollow balls (20)
Door handles, left & right/ windshield wipers, left & right/ retainers (3)/ 1.6x5 BCS (self-tapping) (4)
TraxxasDoor handles, left & right/ windshield wipers, left & right/ retainers (3)/ 1.6x5 BCS (self-tapping) (4) (fits #8010 or 9230 series bodies)
Suspension link, rear (upper) (aluminum, blue-anodized) (10x206mm, center to center) (2) (assembled with hollow balls)
TraxxasSuspension link, rear (upper) (aluminum, blue-anodized) (10x206mm, center to center) (2) (assembled with hollow balls)
SWAY BAR, BLACK (REAR)
TraxxasSway bar, black (rear)
Bumper, front (chrome)/ bumper mount/ 3x10 BCS (2)
TraxxasCanopy, front, blue/white, Aton
TraxxasCanopy, front, blue/white, Aton®
Wheel hubs, hex, aluminum (blue-anodized) (4)
TraxxasWheel hubs, hex, aluminum (blue-anodized) (4)
Output shafts (transfer case), front & rear
TraxxasOutput shafts (transfer case), front & rear
Rotor blade set, green (2)/ 1.6x5mm BCS (2)
TraxxasRotor blade set, green (2)/ 1.6x5mm BCS (2)
Shock tower, front, 7075-T6 aluminum (blue-anodized)
TraxxasShock tower, front, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1)
Body, Rustler 4X4 VXL, green/ window, grill, lights decal sheet (assembled with front & rear body mounts and rear body support for clipless mounting)
TraxxasBody, Rustler® 4X4 VXL, green (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting)
Sold out
Portal Housings, Inner (front), 6061-T6 Aluminum (charcoal Gray-Anodized) (2)/ 3x12 BCS (2)
Portal Housings, Inner (front), 6061-T6 Aluminum (charcoal Gray-Anodized) (2)/ 3x12 BCS (2)
TraxxasPortal housings, inner (front), 6061-T6 aluminum (charcoal gray-anodized) (2)/ 3x12 BCS (2)
Sold out
Portal housings, inner (rear), 6061-T6 aluminum (charcoal gray-anodized) (2)/ 2.5x10 CS (2)
Portal housings, inner (rear), 6061-T6 aluminum (charcoal gray-anodized) (2)/ 2.5x10 CS (2)
TraxxasPortal housings, inner (rear), 6061-T6 aluminum (charcoal gray-anodized) (2)/ 2.5x10 CS (2)
Fenders, inner, front & rear (2 each)/ rock light covers (8)
TraxxasFenders, inner, front & rear (2 each)/ rock light covers (8)
Tailgate panel/ tail light lens (2) (left & right)
TraxxasTailgate panel/ tail light lens (2) (left & right) (fits #8010 series bodies)
Telemetry trigger magnet holder/ magnet 5x2mm (1)
TraxxasTelemetry trigger magnet holder/ magnet, 5x2mm (1)
Canopy, rear, black, Aton
TraxxasCanopy, rear, black, Aton®
LINKAGE SET
TraxxasLinkage set
Slipper pressure plate and hub
TraxxasSlipper pressure plate and hub
Carbon fiber conversion kit (includes chassis, upper chassis, battery hold down, adhesive foam tape, hardware)
TraxxasCarbon fiber conversion kit (includes chassis, upper chassis, battery hold down, adhesive foam tape, hardware)
Half shafts, left or right (internal splined half shaft (2)/external splined half shaft) (2))/ metal u-joints (4)
TraxxasHalf shafts, left or right (1/16 Slash)(internal splined half shaft (2)/external splined half shaft) (2))/ metal u-joints (4)
Decal sheets, 1/16 E-Revo VXL
TraxxasDecal sheets, 1/16 E-Revo® VXL
Spring, shock (GTR) (0.82 rate, double orange) (1 pair)
TraxxasSpring, shock (GTR) (0.82 rate, double orange) (1 pair)
Thrust bearing assembly
TraxxasSuspension arm upper (1)/ suspension arm lower (1) (right rear) (fits Slayer Pro 4x4)
TraxxasSuspension arm upper (1)/ suspension arm lower (1) (right rear) (fits Slayer Pro 4X4)
Transmitter, 2.4GHz, 6-channel
TraxxasTransmitter, 2.4GHz, 6-channel
MOUNT, TELEMETRY EXPANDER (FITS TRX-4)
TraxxasMount, telemetry expander (fits TRX-4®)
Gear plate
TraxxasGear plate
Rotor blade set, orange (2)/ 1.6x5mm BCS (2)
TraxxasRotor blade set, orange (2)/ 1.6x5mm BCS (2)
Rotor blade set, red (2)/ 1.6x5mm BCS (2)
TraxxasRotor blade set, red (2)/ 1.6x5mm BCS (2)
Mount, telemetry expander (fits 4-Tec 2.0)
TraxxasMount, telemetry expander (fits 4-Tec® 2.0 & 3.0)
Communication link, telemetry expander
TraxxasCommunication link, telemetry expander
SHOCK TOWER, REAR
TraxxasShock tower, rear
Hatch, Spartan, Pink Graphics
TraxxasHatch, Spartan, pink graphics
Tires & wheels, assembled, glued (Geode chrome wheels, Canyon AT tires, foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part #5353X & beadlock-style sidewall protectors, part #5665, 5666, 5667)
TraxxasTires & wheels, assembled, glued (Geode chrome wheels, Canyon AT tires, foam inserts) (2) (use with 17mm splined wheel hubs & nuts, part #5...
View full details