Filter
Parts & Upgrades
Shocks, GTR, 134mm, silver aluminum (fully assembled w/o springs) (front, no threads) (2)
TraxxasShocks, GTR, 134mm, silver aluminum (fully assembled w/o springs) (front, no threads) (2)
Stub axles, hardened steel (2) (for use only with #9557 driveshaft) (fits Sledge®)
TraxxasStub axles, hardened steel (2) (for use only with #9557 driveshaft) (fits Sledge®)
Rock sliders, left & right
TraxxasRock sliders, left & right
Springs, front (progressive, -20% rate, orange) (2)
TraxxasSprings, front (progressive, -20% rate, orange) (2)
Ford Fiesta ST Rally Suspension arms, front/rear (left & right) (2)
TraxxasSuspension arms, front/rear (left & right) (2)
Shock Shaft, 69mm (GTR) (front) (TiN-coated) (2)
TraxxasShock shaft, 69mm (GTR) (front) (TiN-coated) (2)
Suspension pin retainers (upper (2), lower (1))
TraxxasSuspension pin retainers (upper (2), lower (1))
Steering link, 5x117mm (1)/ draglink, 5x60mm (1)/ panhard link, 5x63mm (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)
TraxxasSteering link, 5x117mm (1)/ drag link, 5x60mm (1)/ panhard link, 5x63mm (red powder coated steel) (assembled with hollow balls) (for use with #8140...
View full detailsFender brace, inner, front & rear
TraxxasFender brace, inner, front & rear
Driveshaft, center, aluminum (red-anodized)
TraxxasDriveshaft, center, aluminum (red-anodized)
Portal Housings, Outer, 6061-T6 Aluminum (blue-Anodized) (2)/ 2.5x10 CS (12)
TraxxasPortal housings, outer, 6061-T6 aluminum (blue-anodized) (2)/ 2.5x10 CS (12)
Axle housing, front
TraxxasAxle housing, front
Shock shaft, 3x57mm (GTS) (2) (includes bump stops) (for use with TRX-4 Long Arm Lift Kit)
TraxxasShock shaft, 3x57mm (GTS) (2) (includes bump stops) (for use with TRX-4® Long Arm Lift Kit)
Slipper eliminator plate
TraxxasSlipper eliminator plate
Portal Housings, Outer, 6061-T6 Aluminum (green-Anodized) (2)/ 2.5x10 CS (12)
TraxxasPortal housings, outer, 6061-T6 aluminum (green-anodized) (2)/ 2.5x10 CS (12)
Driveshaft assembly, front & rear (4)
TraxxasDriveshaft assembly, front & rear (4)
Two speed conversion kit
TraxxasTwo speed conversion kit
Camber links (4)/ toe links (2)
TraxxasCamber links (4)/ toe links (2)
Owner's manual, 1/16 Rally
TraxxasOwner's manual, 1/16 Traxxas® Rally
Rod ends (8)/ hollow balls (8)
TraxxasRod ends (8)/ hollow balls (8) (fits 1/16 and 1/18 accessory suspension links)
Driveshaft, steel constant-velocity (assembled) (4)
TraxxasDriveshaft, 1/16 Slash (steel constant-velocity) (assembled) (4)
Body mounts, front & rear/ body washer, rear (2)
TraxxasDecal sheets, 1/16th Summit VXL
TraxxasDecal sheets, 1/16th Summit VXL
SHAFT, GTR SHOCK (2)
TraxxasShaft, GTR shock (2)
Suspension links, rear lower, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)
TraxxasSuspension links, rear lower, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)
Push rods, aluminum (red-anodized) (4) (assembled with rod ends)
TraxxasPush rods, aluminum (red-anodized) (4) (assembled with rod ends) (1/16 Slash)
Decal sheet, Slash 4X4
TraxxasDecal sheet, Slash® 4X4
Body mounts, front & rear / body mount posts, front & rear
TraxxasBody mounts, front & rear / body mount posts, front & rear
Suspension link, front upper, 5x68mm (1) (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4 Long Arm Lift Kit)
TraxxasSuspension link, front upper, 5x68mm (1) (blue powder coated steel) (assembled with hollow balls) (for use with #8140X TRX-4® Long Arm Lift Kit)
Body mounts, front (latch)/ 3x15mm BCS (2)
TraxxasDrive cups, inner (2) (steel constant-velocity driveshafts)
TraxxasDrive cups, inner (2) 1/16 E-Revo/Slash (steel constant-velocity driveshafts)
Rebuild kit, slipper clutch (steel disc/friction insert (1)/spring (1)/2.5x12mm pin/4.0mm NL(1))
TraxxasRebuild kit, slipper clutch (steel disc/friction insert (1)/spring (1)/2.5x12mm pin/4.0mm NL(1))
Mount, telemetry expander (fits Stampede 2WD)
TraxxasMount, telemetry expander (fits #3622 or 3622A chassis)
Mount, Go-pro camera, fiberglass
TraxxasMount, Go-pro camera, fiberglass
Canopy, Alias, white/ 1.6x5mm BCS (self-tapping) (3)
TraxxasCanopy, Alias®, white/ 1.6x5mm BCS (self-tapping) (3)
Box, receiver (sealed) (servo mount)/ foam (2)/ BCS 3x10mm/ CS 2.5x8mm (2)/ GS 3x4mm/ silicone grease
TraxxasBox, receiver (sealed) (servo mount)/ foam (2)/ BCS 3x10mm/ CS 2.5x8mm (2)/ GS 3x4mm/ silicone grease
Bulkhead tie bars, front & rear, aluminum (blue-anodized)
TraxxasBulkhead tie bars, front & rear, aluminum (blue-anodized)
Top & idler gear shafts
TraxxasPerformance-tuned exhaust system
TraxxasPerformance-tuned exhaust system
Servo saver set (1/6, 1/5 scale)/ bellcranks/ draglink/ bushings
TraxxasMAIN FRAME
TraxxasMain frame
Bumper, Front (chrome)/ Bumper Mount/ Lens (Left and Right) (2)/ Lens Mount (Left and Right) (2)/ 3x10 BCS (2)/ 2.6x6 BCS (4)
TraxxasBumper, front (chrome)/ bumper mount/ lens (left and right) (2)/ lens mount (left and right) (2)/ 3x10 BCS (2)/ 2.6x6 BCS (4)
Main shaft, 7075-T6 aluminum, blue-anodized (4)/ 1.6x5mm BCS (4)
TraxxasMain shaft, 7075-T6 aluminum, blue-anodized (4)/ 1.6x5mm BCS (4)
Hull, DCB M41, Orange Graphics (Fully Assembled)
TraxxasHull, DCB M41, orange-x graphics (fully assembled)
Hull, Spartan, blue graphics (fully assembled)
TraxxasHull, Spartan, blue graphics (fully assembled)
Hatch, Spartan, Orange Graphics
TraxxasHatch, Spartan, orange graphics
Drive strut (with stainless steel ball bearing)
TraxxasDrive strut (with stainless steel ball bearing)
ExoCage, Summit (includes all parts and hardware for 1 complete roll cage)
TraxxasExoCage, Summit (includes all parts and hardware for 1 complete roll cage)