Filter
Parts & Upgrades
Springs, shock (natural finish) (GTS) (0.30 rate, white stripe) (2)
TraxxasSprings, shock (natural finish) (GTS) (0.30 rate, white stripe) (2)
Springs, shock, long (natural finish) (GTS) (0.47 rate) (included with TRX-4® Long Arm Lift Kit)
TraxxasSprings, shock, long (natural finish) (GTS) (0.47 rate) (included with TRX-4® Long Arm Lift Kit)
Springs, shock, long (natural finish) (GTS) (0.39 rate, orange stripe) (for use with TRX-4® Long Arm Lift Kit)
TraxxasSprings, shock, long (natural finish) (GTS) (0.39 rate, orange stripe) (for use with TRX-4® Long Arm Lift Kit)
Cover, center driveshaft (clear)
TraxxasCover, center driveshaft (clear)
Spur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)
TraxxasSpur gear, 50-tooth (0.8 metric pitch, compatible with 32-pitch)
Rebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks
TraxxasRebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks
Discount -Aluminum Idler Gear 25T For KIT-MINI MG
3RACINGTeam Associated 20mm Shock Rod End & Spring Cup Set (4)
Team AssociatedRC8B4 Spring Cups and Shock Rod Ends
CUSTOMWORKS SMALL BORE SPRING SET (3-10LB)
Custom WorksTeam Associated 48P Brushless Spur Gear (72T)
Team AssociatedSpur Gear, 72 Tooth, 48 Pitch
Rebuild kit, Ultra shocks (for 2 shocks)
TraxxasShock rebuild kit (for 2 shocks)
Pinion Mod 1.5 8.mm Bore 14T
AZ Turn & Burn RCDiff Cover Set (2pcs) - GROM
ARRMAThis high-quality Diff Cover Set provides an ideal replacement part for your ARRMA vehicle.Features Tough composite material for long-lasting vehi...
View full detailsBIG BORE SPRING CUPS (4)
Custom WorksBIG BORE SHOCK TOP CAP
Custom WorksLONG BALL CUPS (4)
Custom WorksAssembled Differential 30T 0.8Mod V2 (1): GROM
ARRMAThis Diff Set provides a pre-assembled replacement front or rear differential unit for servicing your vehicle, now featuring steel internal gears ...
View full detailsDiscount Upgraded Metal Differential Gear Set
ImexShock Tower Set Front
ARRMAARRMA - ARAC9015The Shock Tower Set Front by ARRMA is a quality built accessory.Product SpecificationsManufacturer #: AR330303Part Type: Shocks &...
View full detailsTALL REAR HUB (2)
Custom WorksRear Gearbox Bearing Inserts, Alum (2): TEN
TlrHigh-durability aluminum allows inserts to be used for the life of the vehicle Hard anodized to improve durability and be resistant against scratch...
View full detailsCVA REBUILD KIT
Custom WorksLATCH BODY MOUNT REAR
TraxxasLatch, body mount, rear
BODY MOUNT FRONT
TraxxasBody mount, front
Chassis, Fits: ProSC10, Reflex DB10, DR10 and Trophy Rat
Team AssociatedChassis, Fits: ProSC10, Reflex DB10, DR10 and Trophy Rat
Springs, shock, long (natural finish) (GTS) (0.29 rate, white stripe) (for use with TRX-4® Long Arm Lift Kit)
TraxxasSprings, shock, long (natural finish) (GTS) (0.29 rate, white stripe) (for use with TRX-4® Long Arm Lift Kit)
Shocks, GTS, aluminum (red-anodized) (assembled with spring retainers) (2)
TraxxasShocks, GTS, aluminum (red-anodized) (assembled with spring retainers) (2)
Team Associated 48P Brushless Spur Gear (69T)
Team AssociatedIntroduction RC10B74.2, RC10B74.2D
Big Bore shocks (XX-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
TraxxasBig Bore shocks (XX-long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (rear) (2)
Differential Locker Spool FOR Traxxas Slash Rustler Stampede 2WD
AZ Turn & Burn RCAluminum Complete Transmission 24/1 (Underdrive 45.83%) Transmission ( for 1/18 Redcat Ascent-18 / Ascent-18 Apex)
InjoraINJORA Aluminum Complete Transmission for Redcat Ascent-18 / Ascent-18 Apex Motor compatibility: Not compatible with Redcat Ascent-18 stock 180 br...
View full detailsINJORA Stainless Steel Drive Shaft for SCX24 C10 JLU Bronco Base Camp 4Runner (40.5mm/52.6mm)
InjoraINJORA Stainless Steel Drive Shaft for 1/24 SCX24 JLU C10 Bronco Base Camp 4Runner (40.5mm/52.6mm) Note: Compatible with SCX24 JLU, C10, Bronco, B...
View full detailsAdjustable Camber & Steering Link Set: GROM ,NASCAR
LosiFEATURES: Increase your tuning options with this upgrade Includes Front and Rear Camber Links, and Adjustable Steering Links Designed to work with...
View full detailsBrass Counterweight Axle Gear Cover ( SCX10 III, Capra 1.9 )(2)
AZ Turn & Burn RCBrass Portal Covers add strength down low and a good amount of weight ... without going overboard. Due to the plastic housings that come with these...
View full detailsExotek B6.3/T6.1/SC6.1 Aluminum Front Camber Mount (Black/Blue)
Exotek RacingFastEddy Losi TLR 22 5.0 DC Sealed Bearing Kit
Fasteddy48P Lightweight Hard Anodized Aluminum Pinion Gear (3.17mm Bore) (25T)
AZ Turn & Burn RCR-Design DR10 V2 Wheelie Bar Mount (Black)
R-DesignTeam Associated RC8T3.2 Factory Team HD Front Upper Suspension Arms
Team AssociatedONE PIECE SHOCK MOUNTS (4)
Custom WorksRear Shock Springs (3 pair): Mini-T 2.0
LosiLosi - LOS214014The 40mm Rear Shock Springs (3 pair): Mini-T 2.0 by Losi is a quality built accessory.Product SpecificationsPart Type: Shocks &am...
View full detailsTeam Associated RC8T3.2 Factory Team HD Front Lower Suspension Arms
Team AssociatedOptional HD (Heavy Duty) material suspension arms are a great upgrade to your RC8B3.2 buggy and RC8T3.2 truggy! The updated HD polymer material pro...
View full detailsCurrie F9 Portal Axle Housing/3rd member RR: UTB
Horizon Hobby1/8 053 Mid-Range Inline Exhaust Sys:Hard Anodized
Horizon HobbyDynamite - DYNP5003The 1/8 053 Mid-Range Inline Exhaust System: Hard Anodized by Dynamite is a quality built accessory.Product SpecificationsPart...
View full detailsRoll Cage Front and Front Top Bar: SBR 2.0
LosiTeam Associated T6.1/SC6.1 Rear Suspension Arms
Team AssociatedRear Suspension Arms, for T6.1 and SC6.1
7075 ALLOY 25T SERVO SAVER SET HORN W. BUILT-IN SPRING (ARA340203)
Gpm Rc7075 ALLOY 25T SERVO SAVER SET HORN W. BUILT-IN SPRING MGG025TSHSuitable For ARRMA-1/18 4WD GRANITE GROM MEGA 380-ARA2102,ARRMA-1/18 TYPHON GROM ME...
View full detailsMotor Mount, Aluminum, Adjustable: GROM
LosiFEATURES: Machined 6061-T6 Aluminum Align and set your gear mesh to perfection using this fully adjustable motor mount Anodized Black with Silver ...
View full details