Parts & Upgrades

Sway Bar Arms, Rear, (satin-plated)

Sun gear, planetary (rear)

Sway Bar Arms, Front, (satin-plated)

Gearbox housing (includes upper housing, lower housing, & gear cover)

Suspension arms, blue, front (right), heavy duty (upper (1)/ lower (1))

Spring, shock (red) (2.8 rate, white stripe) (2)

Spur gear, 72-tooth (48 pitch)

Suspension arms, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Suspension arms, red, front (right), heavy duty (upper (1)/ lower (1))

Suspension arms, front (left), heavy duty (upper (1)/ lower (1))

Suspension arms, green, front (left), heavy duty (upper (1)/ lower (1))

Suspension arms, green, front (right), heavy duty (upper (1)/ lower (1))

Bulkhead, front (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Spring, shock (red) (4.4 rate, black stripe) (2)

Spring, shock (red) (4.075 rate, green stripe) (2)

Spring, shock (red) (3.325 rate, orange stripe) (2)

Suspension arms, orange, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Suspension arms, red, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Shock shaft, 69mm (GTR) (front) (2)

Suspension arms, green, rear (left), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Shocks, GTR, 139mm, aluminum (red-anodized) (fully assembled w/o springs) (rear, threaded) (2)

Shock shaft, 74mm (GTR) (rear) (TiN-coated) (2)

Motor mount hinge post/ fixed gear adapter/ 5x25mm BCS (1)/ 4x16mm CS with split and flat washer (1)

Rebuild kit, driveshaft (cross pin (2)/ 16mm pin (2)) (metal parts for 2 driveshafts)

Output gear, 36-tooth, metal

Differential gasket/ x-rings (2)/ 12.2x18x0.5 metal washer (1)/ 12.2x18x0.5 PTFE-coated washer (1)

Brake calipers (red), front (2)/ rear (2)

Axle mount set (rear) (for suspension links)

Half shafts, center (internal splined, extra short (1)/ external splined, extra short (1)) (plastic parts only)

Axle carriers, left & right (1 each) (use with 8x16mm & 17x26mm ball bearings)/ dust boot retainers (4)

Wing mounts, low profile

Suspension arms, orange, front (right), heavy duty (upper (1)/ lower (1))

Suspension arms, orange, rear (right), heavy duty, adjustable wheelbase (upper (1)/ lower (1))

Chassis, E-Revo® (requires #8629 & 8630 bulkheads)

Push rods, aluminum (red-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)