Parts & Upgrades

Springs, shock, long (natural finish) (GTS) (0.62 rate, blue stripe) (for use with TRX-4® Long Arm Lift Kit)

Axle mount set (complete) (front & rear) (for suspension links)

Drive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft)

Suspension pin retainer (4)

Wheel hubs, hex, aluminum (red-anodized) (4)

Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14mm CS (2) (for 2 shocks)

Body mounts & posts, front & rear (complete set)

Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe) (2)

Axle shaft, rear (left)

Axle shaft, rear (right)

Servo mount, steering (for use with TRX-4® Long Arm Lift Kit)

Rod ends, extended (standard (4), angled (4))/ hollow balls (8) (for use with TRX-4® Long Arm Lift Kit)

Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks)

Carriers, stub axle (left & right) (requires 20x32x7 ball bearings)

Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

Spring, shock, white (GTR xx-long) (0.711 rate orange) (1 pair)

Suspension arm, green, lower (right, front or rear),®heavy duty (1)

Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)

Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear)

Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW

Suspension arms, orange, upper (left or right, front or rear), heavy duty (2)

Skid plate, roof (body) (red)/ 3x15mm CS (4) (requires #7713X to mount)

Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)

Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for use only with #7750X driveshaft)

Washers, motor mount, aluminum (green-anodized) (4)/ 4x18mm BCS (4)

Wheel hubs, hex, aluminum (blue-anodized) (4)

Push bar, bumper, chrome (assembled) (fits #8137 bumper)

Driveshaft extension kit, center (includes internal splined, x-long (2), internal splined, long (1) and internal splined, medium (1)) (for use with...

Suspension links, rear lower (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)

Suspension link, front upper, 5x68mm (1) (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)

Suspension links, rear upper (2) (5x115mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)

Suspension links, front lower (2) (5x104mm, steel) (assembled with hollow balls) (for use with #8140 TRX-4® Long Arm Lift Kit)

Washers, motor mount, aluminum (blue-anodized) (4)/ 4x18mm BCS (4)

Suspension arm, red, lower (right, front or rear),®heavy duty (1)

Fuel canisters (yellow) (2)/ 3x8 FCS (1)

Suspension links, rear upper, red (2) (5x115mm, powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4® Long Arm Lift Kit)

Decals, high visibility, red

Decals, high visibility, blue

Fender flares, front & rear (2 each) (fits #8011 or #8211 series bodies)

Decals, high visibility, orange

Mount, camera (for use with Traxxas® 2-axis gimbal)