Parts & Upgrades
AZTAB Aluminum Steering Bell Crank Set for Mini T 2.0 (Red) LOS211013
AZ Turn & Burn RCSlipper Unit, Complete, Assembled: PM-MX
LosiThis complete Slipper Assembly unit is made from genuine Losi parts and is compatible with the Losi Promoto-MX/SM.
Shock tower, front (1), rear (1)/ shock tower brace (2)
TraxxasShock tower, front (1), rear (1)/ shock tower brace (2)
Steering Knuckles (2pcs)
ARRMAARRMA - ARA330558The Steering Knuckles (1 Pair) by ARRMA is a quality built accessory.Product SpecificationsPart Type: Chassis Parts
Axle carriers, left & right (1 each)
TraxxasAxle carriers, left & right (1 each)
1/24 Aluminum 58mm Long Travel Shocks, Gray, for Axial SCX24
PowerHobbyAluminum Damper for the Axial SCX24, or other mini/micro crawler. These shocks are friction damped, requiring only a coating of tacky grease. They ...
View full detailsV2 LAYDOWN TRANSMISSION CASE
Custom WorksPATRIOT FRT. SUSP. MOUNT 0 DEGREE (1 pc)
Custom WorksPATRIOT FRONT SUSPENSION MOUNT 0 DEGREE (1 pc)
Spring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
TraxxasSpring retainers, upper & lower (2)/ spring pre-load spacers: 1mm (4)/ 1.5mm (2)/ 2mm (2)/ 4mm (2)/ 8mm (2) (Big Bore Shocks)
Rear Arm Set: 22S Drag LOS234044
LosiBillet Machined Front Shock Towers w/ Receiver Mount for Axial 1/24 SCX24
IntegyPlanetary gears (4)
TraxxasPlanetary gears (4)
Front Arm Set: 22S Drag LOS234043
LosiFront Bulkhead: PM-MX
LosiThis replacement Front Bulkhead for the Losi Promoto-MX/SM is made of injection molded plastic and Losi hardware.
TRUESPEED 48P 96T WIDE SPUR GEAR
Custom WorksShocks, GTR, 134mm, silver aluminum (fully assembled w/o springs) (front, no threads) (2)
TraxxasShocks, GTR, 134mm, silver aluminum (fully assembled w/o springs) (front, no threads) (2)
Factory Team 12mm Pistons (V2) 3x1.4mm Flat (4)
Team AssociatedRear Shock Tower (1pc) RDS
Redcat RacingRear Shock Tower (1pc)
ARRMA Big Rock Crew Cab, HPI FLUX, MAXX, MAXXSLASH Dust Cover
AZ Turn & Burn RCChassis Side Cover Set: PM-MX
LosiThis Chassis Side Cover Set, which is made of injection molded plastic, is a replacement part for the Losi Promoto-MX/SM.
5 DEG CASTER BLOCKS FOR HEX SPINDLES (2)
Custom WorksStub axles, hardened steel (2) (for use only with #9557 driveshaft) (fits Sledge®)
TraxxasStub axles, hardened steel (2) (for use only with #9557 driveshaft) (fits Sledge®)
TC Bumper & Body Mount Set for FZ02 Fazer Mk 2 Chassis
KyoshoTC Bumper and Body Mount Set for FZ02 Fazer Mk 2 Chassis
DragRace Concepts Outlaw 48P Spur Gear (96T)
DragRace ConceptsHalf Shaft Set, Left Or Right (plastic Parts Only) (internal Splined Half Shaft/ External Splined Half Shaft) (4 Assemblies) (for Use with #8995 WideMaxx™ Suspension Kit)
TraxxasHalf shaft set, left or right (plastic parts only) (internal splined half shaft/ external splined half shaft) (4 assemblies) (for use with #8995 Wi...
View full detailsTekno RC "M5" Hardened Steel Mod1 Pinion Gear w/5mm Bore (23T)
Tekno RCSamix SCX24 Aluminum 4-Link Servo Mount w/39mm Links (Black) (EcoPower/Emax)
SamixTool Pouch, Black (Custom Embroidered with Traxxas Logo)
TraxxasTool Pouch, Black (custom EmbroideRed with Traxxas® Logo)
Driveshafts, center E-Revo (steel constant-velocity) front (1)/ rear (1) (assembled with inner and outer dust boots, for E-Revo)
TraxxasDriveshafts, center E-Revo® (steel constant-velocity) front (1)/ rear (1) (assembled with inner and outer dust boots, for E-Revo)
Chassis supports, front & rear/ 3x12mm BCS (4)/ 3x15mm CS (4)/ 4x14mm BCS (1)
TraxxasChassis supports, front & rear/ 3x12mm BCS (4)/ 3x15mm CS (4)/ 4x14mm BCS (1)
Suspension Arms, Red, Front (left), Heavy Duty (upper (1)/ Lower (1))
TraxxasSuspension arms, red, front (left), heavy duty (upper (1)/ lower (1))
Revo Aluminum 100mm Adjustable Shocks (pr.) - Red
Racers EdgeSide Trim, Left and Right (Black)/ Side Trim Retainers (8)/ Door Handles, Left, Right, and Rear/ Door Handle Mount/ 1.6X5 Bcs (Self-Tapping) (42)
TraxxasSide Trim, Left and Right (Black)/ Side Trim Retainers (8)/ Door Handles, Left, Right, and Rear/ Door Handle Mount/ 1.6x5 BCS (self-tapping) (42)
Speed Bit, Hex Driver, Ball End, 3.0mm (120mm Length)
TraxxasSpeed bit, hex driver, ball end, 3.0mm (120mm length)
Speed Bit Handle, Premium (rubber Overmold)
TraxxasSpeed bit handle, premium, medium (rubber overmold)
Speed Bit, Hex Driver, Ball End, 2.0mm (110mm Length)
TraxxasSpeed bit, hex driver, ball end, 2.0mm (110mm length)
Brake calipers, front or rear (grey) (4)
TraxxasBrake calipers, front or rear (gray) (4)
Shock shaft, 74mm (GTR) (rear) (2)
TraxxasShock shaft, 74mm (GTR) (rear) (2)
Suspension link, rear (upper) (aluminum, black-anodized) (10x206mm, center to center) (2) (assembled with hollow balls)
TraxxasSuspension link, rear (upper) (aluminum, black-anodized) (10x206mm, center to center) (2) (assembled with hollow balls)
Shock Shaft, 69mm (GTR) (front) (TiN-coated) (2)
TraxxasShock shaft, 69mm (GTR) (front) (TiN-coated) (2)
Suspension pin retainers (upper (2), lower (1))
TraxxasSuspension pin retainers (upper (2), lower (1))
Hub Chain Sprocket, Gold: PM-MX
LosiThis Hub Chain Sprocket is made from gold anodized 7075-T6 aluminum and makes a wonderful direct replacement for the rear sprocket on the Losi Prom...
View full detailsSteering link, 5x117mm (1)/ draglink, 5x60mm (1)/ panhard link, 5x63mm (red powder coated steel) (assembled with hollow balls) (for use with #8140R TRX-4 Long Arm Lift Kit)
TraxxasSteering link, 5x117mm (1)/ drag link, 5x60mm (1)/ panhard link, 5x63mm (red powder coated steel) (assembled with hollow balls) (for use with #8140...
View full detailsFender brace, inner, front & rear
TraxxasFender brace, inner, front & rear
Driveshaft, center, aluminum (red-anodized)
TraxxasDriveshaft, center, aluminum (red-anodized)
Axle housing, front
TraxxasAxle housing, front
Portal Housings, Outer, 6061-T6 Aluminum (blue-Anodized) (2)/ 2.5x10 CS (12)
TraxxasPortal housings, outer, 6061-T6 aluminum (blue-anodized) (2)/ 2.5x10 CS (12)
Shock shaft, 3x57mm (GTS) (2) (includes bump stops) (for use with TRX-4 Long Arm Lift Kit)
TraxxasShock shaft, 3x57mm (GTS) (2) (includes bump stops) (for use with TRX-4® Long Arm Lift Kit)