Filter
Parts & Upgrades
Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks)
TraxxasRebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks)
Spring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair)
TraxxasSpring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair)
Steering Servo Mount and Bellcrank Set: Super Baja Rey
LosiPiston, damper (2x0.5mm hole, red) (4)/ travel limiters (4)
TraxxasPiston, damper (2x0.5mm hole, red) (4)/ travel limiters (4)
Shock Cup (4): 8T 3.0
TlrTeam Losi Racing - TLR243009The Shock Cup (4): 8T 3.0 by Team Losi Racing is a quality built accessory.Product SpecificationsPart Type: Shocks &a...
View full details7075 Aluminum Link Mount (Qty 2)
Redcat RacingRC-MT10E Shock Spring Holder
Redcat RacingShock Spring Holder
Ring gear, differential/ pinion gear, differential (12/47 ratio) (rear)
TraxxasRing gear, differential/ pinion gear, differential (12/47 ratio) (rear)
Suspension arm set, rear (includes upper right & left and lower right & left arms)
TraxxasSuspension arm set, rear (includes upper right & left and lower right & left arms)
Rear A-Arms ARRMA Kraton Talion and Outcast
RPMRPM Rear A-arms for the ARRMA Kraton, Talion & Outcast as well as the Durango DEX8T are designed for the ultimate in strength and durability wh...
View full detailsBumper Set For KIT-MINI MG
3RACINGCenter Driveshaft Joint
Redcat RacingCenter Driveshaft Joint (2)
ProTek RC 3/32" (2.4mm) Ceramic Differential Balls (14)
ProTek RC3/32" (2.4mm) Ceramic Differential Balls (14)
Skid plate, roof (body) (orange)/ 3x15mm CS (4) (requires #7713X to mount)
TraxxasSkid plate, roof (body) (orange)/ 3x15mm CS (4) (requires #7713X to mount)
Shock Plastics & Balls (4): LMT
LosiLosi - LOS243014The Shock Plastics & Balls (4): LMT by Losi is a quality built accessory.Product SpecificationsPart Type: Shocks & Shock ...
View full detailsRPM Mud Flaps Traxxas Slash (RPM Bumpers only) TRA6836
RPMRPM - RPM81012The Mud Flaps (RPM Bumper Only): SLH by RPM is a quality built accessory.Product SpecificationsColor: Black
Stub axle, front, 5mm (steel-splined constant-velocity driveshaft) (1)
TraxxasStub axle, front, 5mm (steel-splined constant-velocity driveshaft) (1)
Spur Gear (51T, .8 module)
Redcat RacingHousing, differential (front/rear)
TraxxasHousing, differential (front/rear)
Spur gear, 61-tooth
TraxxasSpur gear, 61-tooth
Cover, gear/motor plate access cover/ motor mount hinge post / 3x10mm CS w/split and flat washers (1) / 2.5x4mm CS (2) / 3x8mm BCS (1) (for 550 motors)
TraxxasCover, gear/motor plate access cover/ motor mount hinge post / 3x10mm CS w/split and flat washers (1) / 2.5x4mm CS (2) / 3x8mm BCS (1) (for 550 mot...
View full detailsSprings, shock (natural finish) (GTS) (0.45 rate) (2)
TraxxasSprings, shock (natural finish) (GTS) (0.45 rate) (2)
Shaft, GTX shock, TiN-coated (2) (assembled with rod ends and steel hollow balls)
TraxxasShaft, GTX shock, TiN-coated (2) (assembled with rod ends and steel hollow balls)
RPM Unlimited Desert Racer Trailing Arm Skid Plates (2)
RPMRPM Trailing Arm Skid Plates protect the Trailing Arms from skid and impact damage and are extremely easy to install, remove and replace. Two screw...
View full detailsDriveshaft assembly, inner (1) (fits front & rear, differential side)
TraxxasDriveshaft assembly, inner (1) (fits front & rear, differential side)
Spring, shock (red) (GTR) (0.314 rate) (1 pair)
TraxxasSpring, shock (red) (GTR) (0.314 rate) (1 pair)
AZTAB ARRMA 8S OUTCAST SHOCK TOWER
AZ Turn & Burn RCThis high-quality Shock Tower provide the ideal replacement part for you kit supplied item.FeaturesTough composite material for long lasting durabi...
View full detailsNerf Bars, Black: SLH/4X4
RPMRPM - RPM80622The Nerf Bars, Black (1pr): SLH, SLH 4X4 by RPM is a quality built accessory.Product SpecificationsMaterial: PlasticColor: Black
AXLE SHAFTS, FRONT, OUTER (2)
TraxxasAxle shafts, front, outer (2)
DRIVESHAFT ASSEMBLY FRONT (1)
TraxxasDriveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #...
View full detailsAluminum Rear Hubs Heavy Duty Bearings, for Arrma Kraton/Talion/Typhon/Limitless/Infraction (ARAC5042, AR330404)
Hot RacingHot Racing aluminum rear hubs with carbon fiber link tabs for the 1/8 Arrma Kraton BLX, Talion BLW, or Typhon BLX. Replaces Arrma AR330193 rear hub...
View full detailsGTX2 Rear 100mm Piggyback Shocks for Traxxas 1/10 Stampede, Rustler & Slash
IntegyAZTAB ARRMA 8S OUTCAST SUSPENSION MOUNTS
AZ Turn & Burn RCAXLE REAR ASSEMBLED
TraxxasAxle, rear (assembled)/ M2.5x0.45 NL (2)
Insert, Threaded Steel (replacement Inserts For #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X) (includes (1) Left and (1) Right Threaded Insert)
TraxxasInsert, threaded steel (replacement inserts for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X) (includes (1) left and (1) right threaded insert)
Alloy Machined Front Shocks (2) for Losi 1/18 Mini-T 2.0
IntegyAlloy Rear Shock Tower for Losi 1/18 Mini-T 2.0
IntegyFuel Bottle, 250cc
HPI RacingFuel Bottle (250cc)
Brass Pinion Gear (15T, .8 module)
Redcat RacingBrass Pinion Gear (15T, .8 module)
Central Drive Shaft and Main Spur Gear
Redcat RacingRear CVA Axle, 66mm: RC10B74
Team AssociatedRear CVA Axle, 66mm, for B74
AZTAB LOSI SUPER ROCK REY TRAILING ARMS
AZ Turn & Burn RCStub axle, aluminum, (orange-anodized) (1) (for use only with #7750X driveshaft)
TraxxasStub axle, aluminum, (orange-anodized) (1) (for use only with #7750X or 7896 driveshaft)
Front & Rear Center Drive Shaft Set
Redcat RacingCenter Drive Shaft Set W/ (Front & Rear) (1set)Includes 13838 3x10mm Machine Thread Screw Pins x4
Bumper, rear/ bumper mount, rear/ 4x10mm BCS (2)/ 3x25mm BCS (2)
TraxxasBumper, rear/ bumper mount, rear/ 4x10mm BCS (2)/ 3x25mm BCS (2)