Parts
Team Associated Ball Cups & Steering Link Set
Team AssociatedJConcepts B6.1/B6.1D Aluminum "C" Mount (Blue)
JCONCEPTSTeam Associated RC10B6.3 Tower Covers, Wire Clips & Rod Ends
Team AssociatedThis part fits the following vehicles:RC10B6.3RC10B6.3D
Rear CVA Bones 65mm: B5, B5M, B6, B6D, B64, B64D
Team AssociatedRear CVA Bones, 65mm, for DR10, RB10, RC10, SR10
AZTAB Metal Center Drive Shafts for SCX24 ( Deadbolt, Betty)
AZTABLead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)
TRAXXASLead wire, glow plug (blue) (EZ-Start® and EZ-Start® 2)/ molex pin extractor (use where glow plug wire does not have bullet connector)
ProTek RC 48P Lightweight Hard Anodized Aluminum Pinion Gear (5.0mm Bore) (22t)
PROTEK RCTeam Associated 12mm V2 Big Bore Shock Rebuild Kit
Team Associated12mm V2 Shock Rebuild
Shock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
TRAXXASShock mounts (front & rear)/ wire clip (1)/ chassis wire clips (4)/ 3x32mm CS (4)/ 3x6mm BCS (1)
Chassis, +4mm, 2mm Plate: 22 5.0
Horizon HobbyFeatures The +4mm longer chassis will be smoother and less twitchy on entry, carry more mid-corn...
View full detailsRPM Traxxas Slash Front Bumper & Skid Plate (Chrome)
RPMGear adapter, fixed
TRAXXASGear adapter, fixed
Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
TRAXXASBox, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2)
RC10B6.2 CVA bone (69mm)
Team AssociatedRC10B6.2 CVA Bone (69mm)
PROMOTO-MX MOTORCYCLE Aluminum 7075 Front Bulkhead (BLUE) LOS261012
GPM RCSuspension pins, 2.5x29mm (king pins) w/ e-clips (2) (strengthens caster blocks)
TRAXXASSuspension pins, 2.5x31.5mm (king pins) with E-clips (2) (strengthens caster blocks)
BALL DIFF for 2.6 TRANS
CUSTOM WORKSGear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)
Spur gear, 36-tooth (1.0 metric pitch)
TRAXXASSpur gear, 36-tooth (1.0 metric pitch)
Rear Driveshaft Set: SBR 2.0
LOSIShock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
TRAXXASShock caps, aluminum (red-anodized) (4) (fits all Ultra Shocks)
Team Associated 3x35mm Shock Shaft (2)
Team AssociatedTeam Associated T6.1/SC6.1 Rear Suspension Arms
Team AssociatedBillet Stage 1 Conversion for Traxxas 1/10 Rustler 2WD, Stampede 2WD & Slash 2WD
INTEGYAZTAB 20mm Red Hex Extension
AZTABWing (exocarbon)/ wing mounts (2)/ washers (2)
TRAXXASWing (exocarbon)/ wing mounts (2)/ washers (2)
Body mounts, front & rear
TRAXXASBody mounts, front & rear
Shock Kit, 13x27.5mm, B6.4
Team AssociatedShock Kit, 13x27.5mm, B6.4
ADJUSTABLE ARM KIT FOR TLR 22SCT 1.0
CUSTOM WORKSADJUSTABLE ARM KIT FOR TLR 22SCT 1.0 Fits Original version 22SCT. Will work on 2.0 and 3.0 with use of 1.0 Rear hubs.
Spring, shock red (GTR) (5.4 rate pink) (1 pair)
TraxxasSpring, shock red (GTR) (5.4 rate pink) (1 pair)
RPM Front Skid Plate (Black) (Slash)
RPMFront Skid Plate, for Slash, Black
RPM Adjustable Rear Body Mount
RPMRPM - RPM81142The Adjustable Rear Body Mount/Posts: SLH, ST, NST by RPM is a quality built accessory.Product SpecificationsMaterial: CompositeCol...
View full detailsShocks, GTR aluminum, blue-anodized (fully assembled w/o springs) (4)
TRAXXASShocks, GTR aluminum, blue-anodized bodies with TiN shafts (fully assembled w/o springs) (4)
Pivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)
TRAXXASPivot ball caps (4)/ dust boots, rubber (4)/ dust plugs, rubber (4)/ dust boot retainers, black (4), blue (4) (2 pkgs. req. to complete truck)
Shock Set 16mm Bore, 134mm Length, 1000cSt Oil
ARRMAThis Shock Set provides a pair of assembled shock absorbers filled with high-quality silicone shock oil for fast and efficient shock replacement on...
View full detailsDIFFERENTIAL F/R COMPLETE
TRAXXASDifferential, front or rear, complete (fits Sledge®)