Parts
Skidplate, chassis
TRAXXASSkidplate, chassis
hex combinator 12MM combinator 5.0 6.0 7.0
AZTABTurnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
TRAXXASTurnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)
Suspension arms, front (right), heavy duty (upper (1)/ lower (1))
TRAXXASSuspension arms, front (right), heavy duty (upper (1)/ lower (1))
Cage Rear, Tower Supports,Mud Guards: SuperRockRey
LOSICamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS ...
View full detailsSuspension arms upper (1)/ suspension arm lower (1) (right front)
TRAXXASSuspension arms upper (1)/ suspension arm lower (1) (right front)
Servo Saver Set Assembled (1pc)
REDCATServo Saver Set Assembled (1pc)Plastic Servo Saver Assembly for all EPX/EPX Pro and STK Models.
AZTAB Aluminum Lower Link Mount Set for Axle (Gen8)
AZTABHardened copper steel Front/Rear worm gears set for Axial SCX24 4Pcs
AZTABBulkhead, front 4-TEC 2.0
TRAXXASBulkhead, front
Suspension arms, long (rear)
TRAXXASSuspension arms, long (rear)
RPM Rear Upper & Lower A-Arms (1/16 E-Revo) (Black)
RPMRebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)
TRAXXASRebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)
Rebuild kit, GTS shocks (x-rings, o-rings, pistons, bushings, e-clips, and rod ends)
TRAXXASRebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)
Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone grease
TRAXXASReceiver Box Cover (for Use Only with #8224 Receiver Box and #2260 BEC)/ Foam Pads/ Seals/ Silicone Grease
Front Bumper & Skid Plate: Losi Baja Rey
LOSILosi - LOS321009The Front Bumper & Skid Plate: Baja Rey by Losi is a quality built accessory.Product SpecificationsPart Type: Chassis Parts
Currie F9 Portal Axle Housing, 3rd member Rear: Capra 1.9 UTB
Horizon HobbySprings, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)
TRAXXASSprings, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)
AZTAB TRX4 Brass Links
AZTABSuspension arms, rear (left & right)
TRAXXASSuspension arms, rear (left & right)
ST Racing Concepts Aluminum Threaded Rear Shock Body Set (Silver) (2) (Slash)
ST RACING CONCEPTSSuspension pins, 44mm (2) w/ e-clips
TRAXXASSuspension pins, 44mm (2) with E-clips
Aluminum Front Bulkhead support: Losi Mini-T 2.0 LOS211011
HOT RACINGProTek RC Lightweight Steel 48P Pinion Gear (3.17mm Bore) (35T)
PROTEK RCRevolution Design 48P Precision R2 Spur Gear (83T)
REVOLUTION DESIGNTeam Associated 64P Spur Gear (88T)
Team AssociatedBrass Diff Cover SCX24
HOT RACINGHot Racing heavy brass cover for SCX24 Worm gear Axles Adds 9g of weight to the axle in a low and centralized location to lower the vehicle's cente...
View full detailsVHA Hub Set Composite: 22 5.0
Team Losi RacingWheel Hex, 12mm x 5.0mm (2)
TLRTeam Losi Racing - TLR232113The Wheel Hex 12mm x 5.0mm (2) by Team Losi Racing is a quality built accessory.Product SpecificationsPart Type: Chas...
View full detailsSteel transmission gear set (20T, 28T, 53T) and pin (1set)
REDCATSteel transmission gear set (20T, 28T, 53T) and pin (1set)Compatible with Everest Gen7 & Everest 10
Suspension arms, blue, upper (left or right, front or rear), heavy duty (2)
TRAXXASSuspension arms, blue, upper (left or right, front or rear), heavy duty (2)
Upper Shock Bushing: 22 (4)
Team Losi RacingTeam Losi Racing - TLR5092The Upper Shock Bushing (4): 22/22-4 by Team Losi Racing is a quality built accessory.Product SpecificationsPart Type: ...
View full details84T Spur Gear DR10
TEAM ASSOCIATEDIntroduction RC10B74, RC10B74.1, RC10B74.1D, RC10B74.2, RC10B74.2D
Push rod (molded composite) (red) (4)/ hollow balls (8)
TRAXXASPush rod (molded composite) (red) (4)/ hollow balls (8)
Stub axle, aluminum (red-anodized) (1) (for use only with #7750X driveshaft)
TRAXXASStub axle, aluminum, (red-anodized) (1) (for use only with #7750X or 7896 driveshaft)