Filter
Parts
Gear, pinion (28-tooth) (48-pitch)/ set screw
TRAXXASGear, pinion (28-tooth) (48-pitch) (fits 3mm shaft)/ set screw
Shock caps (2)/ shock bottoms (2)
TRAXXASShock caps (2)/ shock bottoms (2)
Ultra Shocks (gray) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
TRAXXASUltra Shocks (grey) (xx-long) (complete with spring pre-load spacers & springs) (rear) (2)
Ultra Shocks (black) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)
TRAXXASUltra Shocks (black) (xx-long) (complete with spring pre-load spacers & springs) (rear) (2)
Shock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
TRAXXASShock caps, aluminum (blue-anodized) (4) (fits all Ultra Shocks)
Springs, rear (red) (2.9 rate) (2)
TRAXXASSprings, rear (red) (2.9 rate) (2)
Springs, front (pink) (2)
TRAXXASSprings, front (pink) (2)
Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch)
TRAXXASSpur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch)
Spacers, shock (3x6.5x8mm) (6)
TRAXXASSpacers, shock (3x6.5x8mm) (6)
Gear, 15-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw
TRAXXASGear, 15-T pinion (32-p), heavy duty (machined, hardened steel) (fits 3mm shaft)/ set screw
Spur gear, 38-tooth (1.0 metric pitch)
TRAXXASSpur gear, 38-tooth (1.0 metric pitch)
Turnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741A for complete camber link set)
TRAXXASTurnbuckle, aluminum (blue-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741A for complete camber lin...
View full detailsSpur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (requires #6780 center differential)
TRAXXASSpur gear, steel, 54-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)
Shock tower (front)
TRAXXASShock tower (front)
Turnbuckles (62mm) (front tie rods) (2)
TRAXXASTurnbuckles (62mm) (front tie rods) (2)
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
TRAXXASStub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
Rod ends, long (6)/ hollow ball connectors (6)
TRAXXASRod ends (long) (6)/ hollow ball connectors (6)
Big Bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (front) (2)
TRAXXASBig Bore shocks (long) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts) w/o springs (front) (2)
Rod ends, short (6)/ hollow balls (6)
TRAXXASRod Ends, short (6)/ hollow balls (6)
Mounts, suspension arm (rear) (0-degree) (l&r)
TRAXXASMounts, suspension arm (rear) (0-degree) (L&R)
Top drive gear, machined POM
TRAXXASTop drive gear, machined POM
Mounts, suspension arm (rear) (+/- 1-degree) (l&r)
TRAXXASMounts, suspension arm (rear) (+/- 1-degree) (L&R)
Planetary gear differential (complete)
TRAXXASPlanetary gear differential (complete)
Gear, 16-T pinion (48-pitch) / set screw
TRAXXASGear, 16-T pinion (48-pitch) / set screw
Shock shafts, steel, chrome finish (X-long) (2)
TRAXXASShock shafts, steel, chrome finish (X-long) (2)
Piston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
TRAXXASPiston head set (2-hole (2)/ 3-hole (2))/ shock mounting bushings & washers (2) (Big Bore Shocks)
Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (2)
TRAXXASCarriers, Stub Axle (orange-Anodized 6061-T6 Aluminum) (rear) (Left and Right)/ 3x32mm Hinge Pins (2)/ E-clips (6)/ Hardware
Carriers, stub axle (rear) (2)
TRAXXASCarriers, stub axle (rear) (2)
Springs, front (black) (2)
TRAXXASSprings, front (black) (2)
Big Bore shocks (short) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts w/ springs)(f/r)(2) (Note: Assembled with 32mm shafts, 29mm shafts included)
TRAXXASBig Bore shocks (short) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts w/ springs)(f/r)(2) (Note: Assembled with 32mm sha...
View full detailsShock shafts, hardened steel, titanium nitride coated (xx-long) (2)
TRAXXASShock shafts, hardened steel, titanium nitride coated (xx-long) (2)
Gear, 29-T pinion (48-pitch)/ set screw
TRAXXASGear, 29-T pinion (48-pitch) (fits 3mm shaft)/ set screw
Gear, 24-T pinion (48-pitch) / set screw
TRAXXASGear, 24-T pinion (48-pitch) (fits 3mm shaft)/ set screw
Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)
TRAXXASTurnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)
Gear, 22-T pinion (48-pitch) / set screw
TRAXXASGear, 22-T pinion (48-pitch) (fits 3mm shaft)/ set screw
Camber link set for Bandit (gray) (plastic/ non-adjustable)
TRAXXASCamber link set for Bandit® (gray) (plastic/ non-adjustable)