Filter
Parts
CVA Driveshaft Set Complete, 93.25mm: 22SCT 3.0
LOSISprings, front (blue) (2)
TRAXXASSprings, front (blue) (2)
Axles (front) (2)
TRAXXASAxles (front) (2)
Bumper, rear/ bumper mount, rear (pink)
TRAXXASBumper, rear/ bumper mount, rear (pink)
Coupler, exhaust (silicone)
TRAXXASCoupler, exhaust (siliconee)
Body Post Mount (F/R)
REDCATBody Post Mount (F/R)
Gear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
TRAXXASGear, 31-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw
CVA SHAFTS W/ PINS (1SET)
REDCATTurnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link set)
TRAXXASTurnbuckle, aluminum (red-anodized), camber link, front, 39mm (1) (assembled w/rod ends)/ hollow balls (2) (See part 3741X for complete camber link...
View full detailsSpur Gear-46T
REDCATSpur Gear-46T
Lower chassis, low CG (blue)
TRAXXASLower chassis, low CG (blue)
Stub axle carriers (2)
TRAXXASStub axle carriers (2)
Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
TRAXXASTurnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)
Differential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
TRAXXASDifferential output yokes (heavy duty) (2)/ set screw yoke pins, M4/10 (2)
Skidplate, chassis
TRAXXASSkidplate, chassis
Suspension arms, front (right), heavy duty (upper (1)/ lower (1))
TRAXXASSuspension arms, front (right), heavy duty (upper (1)/ lower (1))
Cage Rear, Tower Supports,Mud Guards: SuperRockRey
LOSICamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS ...
View full detailsSuspension arms upper (1)/ suspension arm lower (1) (right front)
TRAXXASSuspension arms upper (1)/ suspension arm lower (1) (right front)
Servo Saver Set Assembled (1pc)
REDCATServo Saver Set Assembled (1pc)Plastic Servo Saver Assembly for all EPX/EPX Pro and STK Models.
AZTAB Aluminum Lower Link Mount Set for Axle (Gen8)
AZTABBulkhead, front 4-TEC 2.0
TRAXXASBulkhead, front
Suspension arms, long (rear)
TRAXXASSuspension arms, long (rear)
Rebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)
TRAXXASRebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)
Rebuild kit, GTS shocks (x-rings, o-rings, pistons, bushings, e-clips, and rod ends)
TRAXXASRebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)
Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone grease
TRAXXASReceiver Box Cover (for Use Only with #8224 Receiver Box and #2260 BEC)/ Foam Pads/ Seals/ Silicone Grease
VS22 A/B Block - Carbon Fiber (pair)
Team Velocity RCFront Bumper & Skid Plate: Losi Baja Rey
LOSILosi - LOS321009The Front Bumper & Skid Plate: Baja Rey by Losi is a quality built accessory.Product SpecificationsPart Type: Chassis Parts
Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)
TRAXXASSprings, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)
AZTAB TRX4 Brass Links
AZTABSuspension arms, rear (left & right)
TRAXXASSuspension arms, rear (left & right)
ST Racing Concepts Aluminum Threaded Rear Shock Body Set (Silver) (2) (Slash)
ST RACING CONCEPTSSHOCK SHAFT 80MM GT MAXX
TRAXXASShock shaft, 80mm (GT-Maxx®) (TiN-coated) (2) (assembled with rod ends and steel hollow balls)
Suspension pins, 44mm (2) w/ e-clips
TRAXXASSuspension pins, 44mm (2) with E-clips