Parts

Spur gear, steel, 50-tooth (0.8 metric pitch, compatible with 32-pitch) (for center differential)

Gear, 26-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw

Gear, 17-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 13-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 12-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 15-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Gear, 15-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)

Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch)

Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

Spring, shock (red) (long) (GTR) (5.4 rate double orange stripe) (1 pair)

Spur gear, 46-tooth (1.0 metric pitch)

Gear, 14-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Spring, shock (red) (GTR) (1.8 rate double green stripe) (1 pair)

Gear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Springs, red (for Big Bore shocks) (2.5 rate) (2)

Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)

Steering drag link/ 3x10mm shoulder screws (without threadlock) (2)

Spring, shock (white) (GTR) (front) (0.9 rate orange) (1 pair)

Rod ends, heavy duty (Jato®/Slayer) (8)

Spring, shock (white) (GTR) (1.6 rate blue) (1 pair)

Rebuild kit, GTR shock (x-rings, bump stops, bladders, all pistons, piston nuts, shock rod ends) renews 2 shocks

Shocks, GTR aluminum (assembled) (2) (without springs)

Spring, shock (red) (GTR) (6.4 rate purple) (1 pair)

Spring, shock (white) (GTR) (std. rear) (1.4 rate pink) (1 pair)

Spring, shock (red) (GTR) (3.8 rate gold) (1 pair)

Spring, shock (red) (GTR) (1.4 rate double pink stripe)

Clutch bell (14-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm e-clip (2) (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)

Idler gear, steel (30-tooth)

Gear, 31-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Turnbuckles, 94mm (2)

Gear, 26-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Steering drag link (4x72mm turnbuckle) (1)/ rod ends (2)/ hollow balls (2)

Springs, (rear) (pink) (2)

Springs (front) (pink) (2)