{"title":"RPM RC","description":null,"products":[{"product_id":"hd-wing-mount-system-black","title":"HD Wing Mount System - Black","description":"Introducing the HD Wing Mount System from RPM, the toughest wing mounts created for the ARRMA 6S line! What's so unusual about their wing mounts? Just about everything! \u003cbr\u003e\u003cbr\u003eOversized Wing Mounts: RPM Wing Mounts have more material between the mounting points of the wing and the chassis mounts, equating to a tougher and more rigid mount. They've also added in a strengthening rib that extends rearwards, creating a T-shape for additional durability.\u003cbr\u003e\u003cbr\u003eThe RPM HD Wing Mount System is sold with two wing mounts, one skid plate, a brace and all additional hardware needed to install. Each unit is molded in our exceedingly tough blend of engineering grade nylons and backed by their limited lifetime warranty.","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41117922295904,"sku":"RPM81802","price":21.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/wqexn1rruufnwojblsle.jpg?v=1721710719"},{"product_id":"rear-a-arms-arrma-kraton-talion-and-outcast","title":"Rear A-Arms ARRMA Kraton Talion and Outcast","description":"RPM Rear A-arms for the ARRMA Kraton, Talion \u0026amp; Outcast as well as the Durango DEX8T are designed for the ultimate in strength and durability while adding in some much-needed features. \u003cbr\u003eThe first improvement is slop elimination. The A-arms reduce the amount of movement of the A-arm at the hinge pins, providing for better suspension response and more consistent suspension settings.\u003cbr\u003eThe next improvement is the addition of a second shock mount hole further out on the arm, providing for a lower profile suspension set-up. This second shock mount allows the shocks to lay down further and lowers the ride height for a lower center of gravity. This second shock mount matches the additional shock mount hole on the front A-arms (RPM #81482-sold separately).\u003cbr\u003eAnother beneficial improvement comes from reduced weight. RPM Kraton, Talion \u0026amp; Outcast Rear A-arms are roughly 10% lighter than stock AARMA A-arms (48g each versus 53g for stock)!\u003cbr\u003eRPM rear A-arms have molded in mounting points for optional mudguards-RPM #81412 (sold separately). If you plan on running through wet or muddy conditions, these guards are a must-have addition to help protect your driveline from debris kicked up from your front tires.\u003cbr\u003eThe A-arms are designed with leading and trailing 30* chamfered edges for smoother transitions over obstacles too tall for the suspension to clear. As an added benefit, these chamfered edges are more aerodynamic than stock as well. All RPM A-arms are molded from their nearly indestructible blend of engineering grade nylons for performance you can rely on when conditions are at their worst!\u003cbr\u003e\u003cbr\u003eTech Notes: RPM ARRMA Kraton, Talion, Outcast \u0026amp; Durango DEX8T A-arms are sold in pairs. A-arms replace stock ARRMA #AR330249 and stock Durango #TD330707. Stock Durango dirt guards (#TD330764) are not compatible with these A-arms (must use RPM #81412).\u003cbr\u003e\u003cbr\u003e","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41117942382688,"sku":"RPM81402","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/hv1okxm2xq7duf1k30nn.jpg?v=1721711709"},{"product_id":"rear-a-arms-for-the-associated-mt8-black","title":"Rear A-Arms for the Associated MT8, Black","description":"RPM Rear A-arms for the Associated MT8 are designed to improve durability over stock A-arms. How did they do it? First, by increasing the amount of material surrounding the inner hinge pins by 7%, then increasing the width of that thicker diameter by nearly 40%! They then increased the amount of material at the outer hinge pins by 28%! They also increased the width there too, by another 9%.\u003cbr\u003e\u003cbr\u003eThe support beams on RPM A-arms also got beefier. At their thickest, stock a-arms are roughly 1\/2\" (12.7mm) thick but taper down on both ends. That amounts to a loss of nearly 30% of their thickness at the outer hinge pins. Not with RPM! Their A-arms are a full 1\/2\" (12.7mm) over nearly their entire length! They only taper them slightly at the inner hinge pins (.45\" or 11.43mm at their narrowest) to match the maximum size allowable of the inner hinge pin bosses. To compensate for that slight taper, they use four massive support beams instead of two, making RPM MT8 A-arms the toughest alternative to stock available!\u003cbr\u003e\u003cbr\u003eAll RPM A-arms are molded from their nearly indestructible blend of engineering grade nylons for performance you can trust.\u003cbr\u003e\u003cbr\u003eTech Notes: RPM Associated MT8 A-arms are sold in pairs. Their A-arms replace stock Associated #25911.\u003cbr\u003e","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41117979541600,"sku":"RPM70192","price":16.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/noopjwbr0lmw3oj5zzmp.jpg?v=1721713694"},{"product_id":"roof-skid-rails-traxxas-x-maxx","title":"Roof Skid Rails: Traxxas X-Maxx","description":"Let's face facts. If you own an X-Maxx, there's a good chance you're going to wind up on your lid. 19+ lbs. (8.6+ kgs.) will rip through that thin lexan body in no time at all if you don't find a way to protect it. That's where RPM steps in!\u003cbr\u003e\u003cbr\u003eThese Roof Skid Rails are a simple add-on that bolts to the roof of your truck using 3 screws for each rail (2 rails sold per package). Full-length under body support plates are included to prevent the rails from getting yanked off once you flip your monster X-Maxx. With RPM Roof Skid Rails in place, you now have an inexpensive buffer protecting the roof of your $75 - $110 body* from damage, with proven RPM nylons absorbing the slide!\u003cbr\u003e\u003cbr\u003eTech Notes: RPM Roof Skid Rails are tested to work with Traxxas #7711, #7711A \u0026amp; #7717G, #7711R \u0026amp; #7711X bodies only. They have not been tested nor are they guaranteed to work with any other Traxxas or aftermarket bodies.\u003cbr\u003e","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41118003593312,"sku":"RPM80312","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/vihqb7jbr0sjaxefcwlt.jpg?v=1721714508"},{"product_id":"body-skid-rails-2","title":"Body Skid Rails (2)","description":"These Body Skid Rails will fit nearly any scale R\/C car or truck. The only requirements are, the surface must be featureless, flat or curved and have a minimum of at least 3\" (76.2mm) of open area. The unique, segmented design allows the Body Skid Rails to literally bend around curves. That means all those cool contours of your body won't flatten out once installed!\u003cbr\u003e\u003cbr\u003eThe coolest feature, and only available from RPM, is that there are no screws protruding outside of the body. Without external screws, these Body Skid Rails can be worn almost paper thin and never contact a metal screw before needing to be replaced. How is this possible? RPM designed 1\/4\" (6.35mm) bosses that extend below the body surface to bolt the screws in place! The keeps the threads of the screws below the surface of the body. Simple and ingenious.\u003cbr\u003e\u003cbr\u003eMolded in extremely tough and durable engineering grade nylons, you can rely on RPM to protect your ride!\u003cbr\u003e\u003cbr\u003eTech Notes: Sold in pairs. At least 1\/2\" (12.7mm) of clearance under the body where our Body Skid Rails mount is required for proper installation.","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41118041243744,"sku":"RPM70592","price":10.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/obzxfsioongmmrxeftl8.jpg?v=1721715732"},{"product_id":"front-lower-a-arms-for-the-associated-mt8-black","title":"Front Lower A-Arms for the Associated MT8, Black","description":"RPM Front A-arms for the Associated MT8 are designed to improve durability over stock A-arms. How did they do it? First, by increasing the amount of material surrounding the inner hinge pins by 7%, then increasing the width of that thicker diameter by nearly 40%! They then increased the amount of material at the outer hinge pins by 28%! They also increased the width there too, by another 9%.\u003cbr\u003e\u003cbr\u003eThe support beams on RPM A-arms also got beefier. At their thickest, stock a-arms are roughly 1\/2\" (12.7mm) thick but taper down on both ends. That amounts to a loss of nearly 30% of their thickness at the outer hinge pins. Not with RPM! Their A-arms are a full 1\/2\" (12.7mm) over nearly their entire length! They only taper them slightly at the inner hinge pins (.45\" or 11.43mm at their narrowest) to match the maximum size allowable of the inner hinge pin bosses. To compensate for that slight taper, they use four massive support beams instead of two, making RPM MT8 A-arms the toughest alternative to stock available!\u003cbr\u003e\u003cbr\u003eAll RPM A-arms are molded from their nearly indestructible blend of engineering grade nylons for performance you can trust.\u003cbr\u003e\u003cbr\u003eTech Notes: RPM Associated MT8 A-arms are sold in pairs. Their A-arms replace stock Associated #25911.","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41128225570912,"sku":"RPM70202","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/zc3w2ucndjubh6qsa8vl.png?v=1721954505"},{"product_id":"rpm-losi-mini-t-2-0-heavy-duty-rear-a-arms-black","title":"Heavy Duty Rear A-arms for the Losi-T 2.0 \u0026 Mini-B","description":"Identical to their replacement front A-arms for the Losi Mini-T 2.0 \/ Mini-B, RPM rear A-arms have been strengthened for superior durability and performance. Take a look at what they've done (in comparison to HD, 2nd gen stock Losi A-arms):\u003cbr\u003e\u003cbr\u003eThe inner hinge pin bosses are roughly 20% thicker than stock (and dramatically thicker than first gen A-arms).\u003cbr\u003eThey've increased the overall thickness of the A-arm by roughly another 25%.\u003cbr\u003eSupport beams are consistent on thickness and are roughly 50% thicker than some of the thinner stock supports.\u003cbr\u003eUnique Shock surround protects the lower shock bottom and is less prone to damage since the shock pivot ball is captured and no longer fully exposed.\u003cbr\u003e\u003cbr\u003eAll of these strengthening upgrades, combined with some of the best engineering grade nylons in the industry, equate to a set of ultra lightweight replacement A-arms that have unmatched durability and performance. Place your trust in American made. Trust RPM.\u003cbr\u003e\u003cbr\u003eTech Notes: Replaces the rear A-arms from stock Losi #LOS214003.\u003cbr\u003e","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41139799851104,"sku":"RPM72152","price":9.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/svuml4nlyxlzocy380bs.jpg?v=1722296447"},{"product_id":"low-visibility-wheelie-bars-x-maxx","title":"Low Visibility Wheelie Bars : X-Maxx","description":"RPM Low Visibility Wheelie Bars are designed to take the stress off of the low hanging rear bumper whenever the rear end wants to drag on the ground. The wheels we designed are large enough to touch down before the rear bumper does in 99% of normal acceleration wheelies, eliminating your fears of blowing the rear bumper off of the truck or using the rear bumper as a plow.\u003cbr\u003eEach set of Low Visibility Wheelie Bars is made from our nearly indestructible blend of engineering grade nylons and made right here in the USA.\u003cbr\u003e\u003cbr\u003eTech Notes: RPM Low Visibility Wheelie Bars only work with RPM #81762 Rear Bumper Mounts. They will not work with stock or any other known aftermarket rear bumper mounts.\u003cbr\u003e","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41140397047904,"sku":"RPM81582","price":14.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/aakirryj8o0ypyl0ngpp.jpg?v=1722316126"},{"product_id":"front-rear-a-arms-latrax-prerunner-teton-sst","title":"Front or Rear A-arms for the LaTrax Prerunner, Teton \u0026 SST","description":"If you're looking for an incredibly strong alternative to stock A-arms for your LaTrax Prerunner, Teton or SST, look no further than RPM! These A-arms are some of the toughest replacements on the planet, extremely lightweight and less expensive than any other aftermarket option available. Additionally, they reduce suspension slop for more accurate driving characteristics. All this, and proudly Made in the USA!\u003cbr\u003e\u003cbr\u003eTech Notes: RPM LaTrax Prerunner \/ Teton \/ SST A-arms are sold in pairs and replace stock LaTrax #7630. Two packages will be needed to complete one vehicle.","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41140404912224,"sku":"RPM70862","price":9.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/g9mrtvufulvqd4fjqqlo.jpg?v=1722316543"},{"product_id":"front-right-upper-and-lower-a-arms-red","title":"OverviewRPM Front A-arms for V5 \/ EXB editions of the ARRMA Kraton, Notorious, Talion, Fireteam \u0026 Outcast are an all new design. The design modifications accommodate changes made by ARRMA for V5 and EXB versions of these vehicles, although they are...","description":"RPM 6S Front A-arms fit V5 \/ EXB editions of the ARRMA Kraton, Notorious, Talion, Fireteam \u0026amp; Outcast. The design modifications incorporated accommodate changes made by ARRMA for V5 and EXB versions of these vehicles. \u003cbr\u003e\u003cbr\u003eBeefier: These A-arms are significantly beefier than the original 6S version A-arms. Lower A-arm support beams are 30% thicker while upper A-arms are more than 22% thicker. The added thickness not only improves durability and strength, it also reduces flex. Less flex equates to more predictable suspension performance and handling.\u003cbr\u003e\u003cbr\u003eExtra Suspension Options: The lower A-arm has an added shock mount hole further outboard. This additional position provides a lower profile suspension set-up. The shocks lay down a little further, dropping the ride height for a lower center of gravity. A lower center of gravity equates to higher corner speeds.\u003cbr\u003e\u003cbr\u003eCaster Clip Elimination: As for the upper A-arm, RPM eliminated the caster spacers. This gave us room to widen the arm at the inner hinge pin mount. The extra width creates more of an \"A\" shape, stabilizing the upper A-arm. A more stable A-arm improves steering and suspension performance while adding strength and durability.\u003cbr\u003e\u003cbr\u003eAll RPM A-arms are molded from a nearly indestructible blend of engineering grade nylons. Tough materials equate to performance you can rely on when the conditions are at their worst!\u003cbr\u003e\u003cbr\u003eTech Notes: RPM ARRMA Kraton, Talion, Notorious, Fireteam \u0026amp; Outcast A-arms are sold as one upper and one lower in each package. One left and one right package is needed for each vehicle. Our A-arms replace the upper arms from ARRMA #330655 and the lower arms from ARRMA #330656.\u003cbr\u003e\u003cbr\u003eVersion Notes:\u003cbr\u003eV5 \u0026amp; EXB models: Stock replacement A-arms for ARRMA #330655 and ARRMA #330656.\u003cbr\u003eV4 and earlier models: Requires 1 - ARRMA #ARA713032 Shock Mount Pin \u0026amp; 1 - ARRMA #ARA330645 End Cap. Replaces stock ARRMA #AR330218 \u0026amp; #AR330219.\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003estock replacement a-arms for V5 \/ EXB models (see \"Version Notes\" below)\u003c\/li\u003e\u003cli\u003eextra shock mount hole for added suspension versatility\u003c\/li\u003e\u003cli\u003efits most 6S version models (see \"Version Notes\" below)\u003c\/li\u003e\u003cli\u003esold as one upper and one lower in each package\u003c\/li\u003e","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41140497547360,"sku":"RPM81609","price":17.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/wgrcfw4g8srbzpcaehs0.jpg?v=1722323191"},{"product_id":"rpm-traxxas-sledge-front-bumper-skid-plate-black","title":"Front Bumper and Skid Plate, Black, for the Traxxas Sledge","description":"The RPM Front Bumper and Skid Plate for the Traxxas Sledge is a unique design that works with the Traxxas body mounting mechanism. Traxxas designed the body mounting system to move forward instead of rearward. Because it moves forward by well over 1\" (25mm), it severely limits bumper design. However, RPM engineers found a way to incorporate a fully functioning bumper with the Traxxas body mounting system.\u003cbr\u003e\u003cbr\u003eHow did they do it? First, RPM eliminated the stock bumper and replaced it with a hinge pin retainer, since realistically, that's all the stock bumper really is. Next, they eliminated the stock skid plate in favor of a wider, longer and more protective skid. Lastly, they bolted a unique bumper to the front of the skid plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge sits below the body, which allows the body mounting system full range of motion, yet the Sledge finally has some tough, RPM front end protection.\u003cbr\u003e\u003cbr\u003eEach RPM Front Bumper and skid plate is molded in black from their exclusive blend of engineering grade nylons for unmatched strength and durability. All RPM molded products are made in the USA and backed by their limited lifetime warranty against breakage.\u003cbr\u003e\u003cbr\u003eTech Notes: The RPM Front Bumper and Skid Plate is designed specifically for the Traxxas Sledge and replaces the bumper and skid plate from stock Traxxas #9535.","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41140678426720,"sku":"RPM70982","price":17.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/f1ulibkf1pjsxc2uzorb.jpg?v=1722332828"},{"product_id":"esc-cage-for-the-castle-cobra-8-esc-traxxas-vehicles","title":"ESC Cage for the Castle Cobra 8 ESC \u0026 Traxxas Vehicles","description":"Our ESC Cage for the Castle Cobra 8 ESC for Traxxas vehicles provides a solid, positive mount. A locked in mount keeps your new and valuable ESC in place even under the most extreme circumstances. It also allows the ESC to be run with or without a fan. It encases the ESC body only, leaving the entire ESC fan free to do its job.\u003cbr\u003e\u003cbr\u003eThe RPM ESC Cage for the Castle Cobra 8 ESC works with the Traxxas Sledge, Revo 2.0 and the Unlimited Desert Racer. Our ESC Cage fits in the stock location as well.\u003cbr\u003e\u003cbr\u003eEach ESC Cage is designed to simplify ESC installation and upkeep of the vehicle. No more struggling with gooey double-sided tape to remove your aftermarket ESC during maintenance either. Transferring the electronics to another car also becomes a breeze.\u003cbr\u003e\u003cbr\u003eAdditionally, we include two separate On\/Off switch mounts for more versatility in positioning the On\/Off switch to your liking. The Base Plate also has two On\/Off switch mounting locations, increasing its versatility even further.\u003cbr\u003e\u003cbr\u003eEach RPM ESC Cage is manufactured from our ridiculously tough blend of engineering grade nylons and backed by our limited lifetime warranty against breakage. Don't trust your investment to double-sided tape or zip ties. One fail and your ESC will eject like a bullet from a gun! Trust a name you've known for decades for bulletproof protection - RPM!\u003cbr\u003e\u003cbr\u003eTech Notes: The RPM ESC Cage for the Cobra 8 ESC is designed to fit in place of stock Traxxas VXL6S ESC's #3485 and #3485T. The ESC Cage works with the following Castle part numbers: 010-0172-00, 010-0172-01, 010-0172-02, 010-0172-03 and 010-0172-04. While the ESC Cage will fit a variety of applications, they have been tested and guaranteed to fit the following Traxxas vehicles in stock form only - Sledge, Revo 2.0 and the Unlimited Desert Racer.","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41140948762720,"sku":"RPM70282","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/vo1yi6etqqxhj34d3wea.jpg?v=1722347808"},{"product_id":"esc-cage-for-the-castle-cobra-8-esc-arrma-6s-vehicles","title":"ESC Cage for the Castle Cobra 8 ESC \u0026 ARRMA 6S Vehicles  AR320430","description":"Our ESC Cage for the Castle Cobra 8 ESC provides a solid, positive mount to keep your new and valuable ESC in place even under the most extreme circumstances. Check out this list of features built into each RPM ESC Cage:\u003cbr\u003e\u003cbr\u003e- Solid mount without using adhesives or zip-ties.\u003cbr\u003e- The ESC can be run with or without a fan.\u003cbr\u003e-  Air channels along the sides allow air movement for better cooling.\u003cbr\u003e- Installation and maintenance simplification.\u003cbr\u003e- Easy swaps of the ESC between vehicles.\u003cbr\u003e- Integrated On \/ Off switch mount.\u003cbr\u003e- Rolled cage edge so no sharp edges come into contact with your motor wires.\u003cbr\u003e- Integrated stock Cable-Tidy Clip mount.\u003cbr\u003e- Manufactured from our ridiculously tough blend of engineering grade nylons.\u003cbr\u003e- Backed by our limited lifetime warranty against breakage.\u003cbr\u003e\u003cbr\u003eDon't trust your investment to double-sided tape or zip ties. One fail and your ESC will eject like a bullet from a gun! Trust a name you've known for decades for bulletproof protection - RPM!\u003cbr\u003e\u003cbr\u003eTech Notes: The RPM ESC Cage for the Cobra 8 ESC is designed to replace the stock ESC Mounting Plate ARRMA #AR320430. The ESC Cage works with the following Castle part numbers: 010-0172-00, 010-0172-01, 010-0172-02, 010-0172-03 and 010-0172-04. While the ESC Cage will fit a variety of applications, they have been tested and guaranteed to fit the following ARRMA 6S vehicles in stock form only - Kraton, Mojave, Notorious, Talion, and Typhon that use the #AR320430 stock mounting plate. While the Fireteam uses the same stock mounting plate, space restrictions may prevent our ESC Cage from bolting to the chassis properly","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41140973764704,"sku":"RPM70712","price":13.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/ehiohfk721si6qb73dhx.jpg?v=1722348291"},{"product_id":"hd-v2-wing-mounts-for-the-arrma-kraton-exb-v2","title":"HD v2 Wing Mounts, for the ARRMA Kraton EXB v2","description":"Introducing HD v2 Wing Mounts for the ARRMA Kraton 6S EXB v2 from RPM. They're the toughest wing mounts created for the ARRMA 6S EXB v2! What's so unusual about their wing mounts? Just about everything! \u003cbr\u003eThe RPM HD v2 Wing Mounts are sold with two wing mounts, one skid plate, one brace, two adjustable wing mounting plates and all additional hardware needed to install. Each system is molded in their exceedingly tough blend of engineering grade nylons and backed by a limited lifetime warranty.\u003cbr\u003eVersion Compatibility: The RPM HD v2 Wing Mounts fit the EXB v2 edition of the ARRMA 6S Kraton and any other vehicle running ARRMA #ARA320758 Wing Mounts exclusively. It is not compatible with v5 or older editions running ARRMA #320347, #320194 or any other wing mounts. Please see their original #81802 HD Wing Mount System for these vehicles.\u003cbr\u003eReplacement skid plates are also available. Please see RPM #81752 to replace worn or otherwise damaged skid plates from this kit.\u003cbr\u003eTech Notes: RPM #81592 replaces the wing mounts only from ARRMA #ARA320758. RPM HD v2 Wing Mounts require the use of some stock ARRMA components and mounting hardware.\u003cp\u003e\u003c\/p\u003e\u003chr\u003e\u003cdetails\u003e\u003csummary\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/summary\u003e\u003cul\u003e\n\u003cli\u003eHD Wing Mounts: RPM Wing Mounts have thick support material between the mounting points of the wing and the chassis mounts. More support equates to a tougher and more rigid mount.\u003c\/li\u003e\n\u003cli\u003eIncluded Rear Skid Plate: In order to make the toughest wing mounts, they had to devise a new structure to create a triangulated base of support. RPM's rear skid plate incorporates mounting points for a vertical brace. The brace spans the distance between the wing mounts and the skid plate, creating an incredibly tough system. As an added bonus, the skid plate helps protect the rear end of that expensive aluminum chassis.\u003c\/li\u003e\n\u003cli\u003eBrace: RPM's massive vertical brace is the linchpin to the success of their HD v2 Wing Mounts. The brace eliminates the leveraging action of impacts on the rear of the wing. That leverage invariably destroys normal wing mounts.\u003c\/li\u003e\n\u003cli\u003eOptional Wheelie Bars: Their HD v2 Wing Mounts allow the use of RPM #72162 HD Wheelie Bars (sold separately). Now you can finally bolt on a set of wheelie bars where stock doesn't allow any.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/details\u003e","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41172891533408,"sku":"RPM81592","price":23.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/k66jq4sweletwwfwpinm.jpg?v=1723783924"},{"product_id":"mud-guards-for-rpm-kraton-talion-outcast-rear-a-arms","title":"Mud Guards for RPM Kraton, Talion \u0026 Outcast Rear A-arms","description":"RPM Mud Guards work with RPM #81402 A-arms exclusively (for the ARRMA Kraton, Talion \u0026amp; Outcast as well as the Durango DEX8T) and help prevent dirt and mud build-up in your rear suspension and driveline components. By keeping the debris kicked up by your front wheels off of the rear shocks, turnbuckles and driveshafts, your suspension and driveline components will last longer and run much smoother between cleanings.\u003cbr\u003eRPM Mud Guards are extremely light (weighing in at only 8.5g. each) sold in pairs and molded in our engineering blend of incredibly strong nylons for a lifetime of protection you can trust.\u003cbr\u003e\u003cbr\u003eTech Notes: RPM Mud Guards work exclusively with RPM A-arms (RPM #81402). They are not designed to work with stock or any other aftermarket A-arms.\u003cbr\u003e","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41438462476384,"sku":"RPM81412","price":6.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/n9vxu0rlznyqqv2samrp.jpg?v=1731832457"},{"product_id":"rpm-replacement-pin-set-true-track-a-arms","title":"RPM Replacement Pin Set True-Track A-Arms","description":"REPLACEMENT HINGE PIN SET TRUE-TRACK A-ARMS (2 HIN GE PI","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":41497623396448,"sku":"RPM80970","price":6.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/hrpdrpm80970.jpg?v=1734856540"},{"product_id":"front-bumper-and-skid-plate-for-traxxas-slash-2wd-nitro-slash-pink","title":"Front Bumper and Skid Plate, for Traxxas Slash 2wd \u0026 Nitro Slash, Pink","description":"Two-piece front bumper for the Traxxas Slash 2wd \u0026amp; Nitro Slash is simple, strong, effective and highly attractive. RPM made it a two-piece design to give the Slash 2wd owner the option of full front-end bash-proof and crash-proof protection with both the skid plate and bumper installed or if a racing profile is wanted, the front bumper can be removed and the skid plate by itself can be run as a light-weight alternative bumper \/ skid plate that shreds 27 grams (almost a full ounce) of weight from the front end of the truck.\u003cp\u003e\u003cb\u003eFeatures:\u003c\/b\u003e\u003c\/p\u003e\u003cli\u003eReplaces stock Traxxas #5835\u003c\/li\u003e","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":42444471369824,"sku":"RPM80957","price":12.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/hrpdrpm80957.jpg?v=1766392579"},{"product_id":"rpm-revolver-10-hole-wheels-for-traxxas-1-10-electric-front-nitro-rear-12mm-hex-chrome-2","title":"RPM Revolver 10 Hole Wheels for Traxxas 1\/10 Electric Front\/Nitro Rear 12mm Hex (Chrome) (2)","description":"2.2 Revolver Wheels, for Traxxas Rustler\/Stampede (Front), Chrome","brand":"RPM RC","offers":[{"title":"Default Title","offer_id":42874797162592,"sku":"RPM82063","price":10.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0551\/2812\/9632\/files\/hrpdrpm82063.jpg?v=1781595362"}],"url":"https:\/\/www.azturnandburn.com\/collections\/rpm-rc\/tires-wheels-accessories-stadium-truck.oembed","provider":"AZ Turn \u0026 Burn RC","version":"1.0","type":"link"}