TRAXXAS
Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
TraxxasClutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
Steering bellcranks, drag link (red-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
TRAXXASSteering bellcranks, drag link (red-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
Camber links, rear (TUBES green-anodized 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, rear (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (...
View full detailsScrews, 3x15mm flat-head machine (hex drive) (6)
TRAXXASScrews, 3x15mm flat-head machine (hex drive) (6)
Steering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
TRAXXASSteering bellcranks, drag link (pink-anodized 6061-T6 aluminum)/ 5x8mm ball bearings (4)/ hardware (assembled)
Stub axle carriers, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
TRAXXASStub axle carriers, Rustler®/Stampede®/Bandit® (2), 6061-T6 aluminum (pink-anodized)/ 5x11mm ball bearings (4)
SEAL KIT RECEIVER BOX
TRAXXASSeal kit, receiver box (includes o-ring, seals, and silicone grease)
Bumper, front / bumper mount, front / 4x23mm RM (2)/ 3x10mm RST (2) (black)
TRAXXASBumper, front / bumper mount, front / 4x23mm RM (2)/ 3x10mm RST (2) (black)
Velineon® VXL-8s Electronic Speed Control, waterproof (brushless) (fwd/rev/brake)
TRAXXASShock tower (front)
TRAXXASShock tower (front)
Steering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4)
TRAXXASSteering blocks, Rustler®/Stampede®/Bandit (2), 6061-T6 aluminum (orange-anodized)/ 5x11mm ball bearings (4) Traxxas aluminum steering blocks impro...
View full detailsCaster blocks, 30-degree, orange-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
TRAXXASCaster Blocks, 30-degree, Orange-Anodized 6061-T6 Aluminum (Left and Right)/ Suspension Screw Pin (2)
Skid plates, front & rear (green)
TRAXXASSkid plates, front & rear (green)
Skid plates, front & rear (blue)
TRAXXASSkid plates, front & rear (blue)
Skid plates, front & rear (pink)
TRAXXASSkid plates, front & rear (pink)
Body mounts, front & rear/ body mount posts, front & rear (adjustable)/ 2.5x18mm screw pins (4)
TRAXXASBody mounts, front & rear/ body mount posts, front & rear (adjustable)/ 2.5x18mm screw pins (4)
Dual cooling fan kit (with shroud), Velineon® 1200XL motor
TRAXXASDual cooling fan kit (with shroud), Velineon® 1200XL motor
Rubber pit mat, 36x20x0.25
TraxxasRubber pit mat, 36x20x0.25
Transmission, complete (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash®)
TraxxasTransmission, complete (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash®)
Motor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 6.5mm gold-plated bullet connectors) (for Maxx®/Hoss™) (not for use in marine models)
TRAXXASMotor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 6.5mm gold-plated bullet connectors) (for Maxx®/Hoss®) (not for use in marine models)
Motor, Velineon® 3500, brushless (assembled with 12-gauge wire and gold-plated bullet connectors)
TRAXXASMotor, Velineon® 3500, brushless (assembled with 12-gauge wire and gold-plated bullet connectors)
Caster blocks, 30-degree, green-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
TRAXXASCaster blocks, 30-degree, green-anodized 6061-T6 aluminum (left & right)/ suspension screw pin (2)
Battery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad
TRAXXASBattery hold-down (gray) (1) / receiver hold-down (grey) (1) / metal posts (2)/ spacers (2)/ body clips (2)/ servo tape/ adhesive foam pad
Bumper, front / bumper mount, front / 4x23mm RM (2)/ 3x10mm RST (2) (green)
TRAXXASBumper, front / bumper mount, front / 4x23mm RM (2)/ 3x10mm RST (2) (green)
Shaft, propeller
TRAXXASShaft, propeller
Cooling fan kit (with shroud), Velineon® 540XL motor
TRAXXASCooling fan kit (with shroud), Velineon® 540XL motor
Screws, 4x15mm countersunk machine (6)
TRAXXASScrews, 4x15mm countersunk machine (6)
Turnbuckles (62mm) (front tie rods) (2)
TRAXXASTurnbuckles (62mm) (front tie rods) (2)
Turnbuckles, aluminum (green-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
TRAXXASTurnbuckles, Aluminum (green-Anodized), Toe Links, 59mm (2) (assembled with Rod Ends and Hollow Balls) (requires 5mm Aluminum Wrench #5477)
Main chassis (black) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)
TRAXXASMain chassis (black) (164mm long battery compartment) (fits both flat and hump style battery packs) (use only with #3626R ESC mounting plate)
Screws, 4x25mm button-head machine (hex drive) (6)
TRAXXASScrews, 4x25mm button-head machine (hex drive) (6)
Plug Adapter (For TRX® Power Charger to charge 7.2V Packs)
TraxxasPlug Adapter (For TRX® Power Charger to charge 7.2V Packs)
Nimh 6-Ce Battery pack 16 E-Revo,1/16 Slash 4X4, 1/16 Summit, 1/18 LaTrax Desert1/18 LaTrax Rally, 1/18 LaTrax Teton
TRAXXASBattery, Series 1 Power Cell iD®, 1200mAh (NiMH, 6-C flat, 7.2V, 2/3A)
Charger, EZ-Peak® Plus, 4 amp, NiMH/LiPo with iD® Auto Battery Identification
TRAXXASCharger, EZ-Peak® Plus, 4 amp, NiMH/LiPo with iD® Auto Battery Identification
Traxxas® connector, 4s (male) (2) - FOR ESC USE ONLY
TRAXXASTraxxas connector, 4s (male) (2) - FOR ESC USE ONLYFOR ESC USE ONLY The Traxxas 4s connector adds single 4s LiPo compatibility to the VXL-6s speed ...
View full details7-CELL NIMH 3300MAH 8.4V HUMP
TRAXXASBattery, Series 3 Power Cell iD®, 3300mAh (NiMH, 7-C hump, 8.4V)