TRAXXAS

Clutch shoes (2)/ spring (T-Maxx®/Revo®/Jato®/Nitro 4-Tec®)

Housing, differential (front)

Plate, motor/ upper spur gear cover

Caster blocks (c-hubs) (2)/ kingpin bushings (4)

Bulkhead tie bar, front (steel)

Suspension screw pin set, front or rear (hardened steel), 4x18mm (4), 4x38mm (2), 4x33mm (2), 4x43mm (2)

Suspension arm, lower left/ arm insert (assembled with hollow ball)

RACE-INSPIRED ENGINEERINGEXTREME 8S POWER AND SPEEDX-TRUCK™ SIZE AND STRENGTH 8s 30+ Volts 60+mph* BUILT FOR SPEED AND HANDLING XRT was engineere...

Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Cush drive key/ pin/ elastomer damper

Spur gear, 72-tooth (0.8 metric pitch, compatible with 32-pitch)

Springs, front (green) (2)

Gear set, metal (for 2085, 2085X servos)

Wheels, TRX-4® 1.9 (satin beadlock) (2)

Screw pin set (Rustler®, Bandit®, Stampede®)

Stub Axle, Aluminum (Black-Anodized) (1) (for Use Only with #7750X Or 7896 Driveshaft)

Suspension arm, green, lower (left, front or rear), heavy duty (1)

Suspension arm, orange, lower (right, front or rear),®heavy duty (1)

Plate, motor, orange

Heavy-Duty Rear Suspension Arms Rear heavy-duty suspension arms incorporate our toughest proprietary composite material. Traxxas designed this comp...

Gear set (for 2065A waterproof sub-micro servo)

Caps and spring retainers, GTR long/xx-long shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

Bulkhead, rear (upper and lower)/ 4x12mm BCS (6) (requires #8622 chassis)

Toe links, molded composite, 173mm (158mm center to center) (black) (2)

Plate, motor, green

Skid plate, roof (body) (green)/ 3x15mm CS (4) (requires #7713X to mount)

Body mounts, front & rear/ 3x15mm BCS (1)/ 3x12mm shoulder screw (2)/ 3x10mm flat-head machine screw (6)/ 3x15mm flat-head machine screw (2)

Suspension arms, blue, front (left), heavy duty (upper (1)/ lower (1))

Spring, shock (GTR) (1.92 rate, green) (1 pair)

Body, GTR shock (molded composite) (2)

Cover, gear (clear)

Battery hold-down mounts, left (2)/ right (2)/ 3x18mm CS (4)

Chassis

Skid plate, roof (body) (red)/ 3x12mm CS (4)

Springs, rear (blue) (2)

Driveshaft assembly, rear, heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Connector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)