TRAXXAS

Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)

Suspension arms, front (right), heavy duty (upper (1)/ lower (1))

Suspension arms upper (1)/ suspension arm lower (1) (right front)

Bulkhead, front

Suspension arms, long (rear)

Rebuild kit, steel constant velocity driveshaft (includes drive pin & cross pin for two driveshaft assemblies)

Rebuild kit, TRX-4® shocks (x-rings, o-rings, pistons, bushings, e clips, rod ends, and travel limiters)

Springs, shock, long (natural finish) (GTS) (0.54 rate, green stripe) (for use with TRX-4® Long Arm Lift Kit)

Suspension arms, rear (left & right)

Ball bearings, black rubber sealed (5x8x2.5mm) (2)

Suspension arms, blue, upper (left or right, front or rear), heavy duty (2)

Push rod (molded composite) (red) (4)/ hollow balls (8)

Stub axle, aluminum, (red-anodized) (1) (for use only with #7750X or 7896 driveshaft)

Spring, shock (GTR) (0.82 rate, triple orange) (1 pair)

Driveshaft assembly, center, aluminum

Spur gear, 76-tooth (48-pitch) (for models with Torque-Control slipper clutch)

Differential, rear (complete with pinion gear and differential plastics) (fits 1/10-scale Rally & 4X4 VXL models: Slash®, Stampede®, Rustler®) ...

Spur gear, 54-tooth (1.0 metric pitch)

Mount, steering arm/ steering stops (2) (lower hinge pin retainer) (includes standard and maximum throw steering stops)

Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering

Tie bar, fiberglass

Axle carriers, left & right (2 each)

Spur gear, 52-tooth (0.8 metric pitch, compatible with 32-pitch) (for Slash 4x4 center differential)

Axle housing, rear/ axle supports, left & right/ axle hub, rear (2)

Springs, shock (natural finish) (GT-Maxx®) (1.450 rate) (2)

Push rod (steel), heavy duty (2) (assembled with rod ends)

Drive hub, center, rear (1)/ 4x3 GS (1)

Springs, rear (green) (2)

Spur gear, 70-tooth

Driveshaft, steel constant-velocity (heavy duty, shaft only, 122.5mm)

Spring retainers, lower (captured) (4)/ 2.5x10 CS (4) Set of four captured lower spring retainers for 1/10 scale GTR shocks includes 2.5x10 mm scre...

Rod ends, heavy duty (toe links) (8) (assembled with hollow balls)

Housing, differential (front)

Bulkhead tie bar, front (steel)

Suspension arm, lower left/ arm insert (assembled with hollow ball)

Spur gear, 72-tooth (0.8 metric pitch, compatible with 32-pitch)

Spring, shock (GTR) (1.76 rate, orange) (1 pair)

Skid plate, roof (body) (blue)/ 3x15mm CS (4) (requires #7713X to mount)

Servo mount, 6061-T6 aluminum (red-anodized)

Driveshaft, center, 6061-T6 aluminum (green-anodized)