Filter
TRAXXAS
Axle shaft, front, heavy duty (left & right)/ portal drive input gear (machined) (2) (assembled)
TRAXXASAxle shaft, front, heavy duty (left & right)/ portal drive input gear, front (machined) (2) (assembled)
Springs, shock (natural finish) (GTS) (0.61 rate, blue stripe) (2)
TRAXXASSprings, shock (natural finish) (GTS) (0.61 rate, blue stripe) (2)
Cable, T-lock (extra long) (for use with TRX-4® Long Arm Lift Kit)
TRAXXASCable, T-lock, extra long (193mm) (for use with TRX-4® Long Arm Lift Kit)
Springs, shock, long (natural finish) (GTS) (0.62 rate, blue stripe) (for use with TRX-4® Long Arm Lift Kit)
TRAXXASSprings, shock, long (natural finish) (GTS) (0.62 rate, blue stripe) (for use with TRX-4® Long Arm Lift Kit)
Axle mount set (complete) (front & rear) (for suspension links)
TRAXXASAxle mount set (complete) (front & rear) (for suspension links)
Wheel hubs, hex, aluminum (blue-anodized) (4)
TRAXXASWheel hubs, hex, aluminum (blue-anodized) (4)
Drive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft)
TRAXXASDrive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft)
Suspension pin retainer (4)
TRAXXASSuspension pin retainer (4)
SUSPENSION PINS HARDEND 4X85MM
TRAXXASSuspension pins, 4x85mm (hardened steel) (2)
Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14mm CS (2) (for 2 shocks)
TRAXXASShock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14mm CS (2) (for 2 shocks)
Battery plate/ battery strap/ 3x8 flat-head screws (4) (requires #8072 inner fenders)
TRAXXASBattery plate/ battery strap/ 3x8 flat-head screws (4) (requires #8072 inner fenders)
Body mounts & posts, front & rear (complete set)
TRAXXASBody mounts & posts, front & rear (complete set)
Axle shaft, front (right)/ drive pin/ cross pin
TRAXXASAxle shaft, front (right)/ drive pin/ cross pin
Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe) (2)
TRAXXASSprings, shock (natural finish) (GTS) (0.39 rate, orange stripe) (2)
Axle shaft, rear (left)
TRAXXASAxle shaft, rear (left)
Axle shaft, rear (right)
TRAXXASAxle shaft, rear (right)
Long Arm Lift Kit, TRX-4®, complete (includes red powder coated links, red-anodized shocks)
TRAXXASLong Arm Lift Kit, TRX-4®, complete (includes red powder coated links, red-anodized shocks)
Rod ends, extended (standard (4), angled (4))/ hollow balls (8) (for use with TRX-4® Long Arm Lift Kit)
TRAXXASRod ends, extended (standard (4), angled (4))/ hollow balls (8) (for use with TRX-4® Long Arm Lift Kit)
Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)
TRAXXASSpider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)
Rebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks)
TRAXXASRebuild kit, GTR long/xx-long shocks (x-rings, bladders, pistons, piston nuts, shock rod ends, hollow balls) (renews 2 shocks)
Carriers, stub axle (left & right) (requires 20x32x7 ball bearings)
TRAXXASCarriers, stub axle (left & right) (requires 20x32x7 ball bearings)
Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
TRAXXASCaps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))
Shocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)
TRAXXASShocks, GTR xx-long blue-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)
Spring, shock, white (GTR xx-long) (0.711 rate orange) (1 pair)
TRAXXASSpring, shock, white (GTR xx-long) (0.711 rate orange) (1 pair)
Motor mount, 6061-T6 aluminum (blue-anodized)
TRAXXASMotor mount, 6061-T6 aluminum (blue-anodized)
Shocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)
TRAXXASShocks, GTR xx-long green-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2)
Shocks, GTX, aluminum (green-anodized) (fully assembled w/o springs) (2)
TraxxasShocks, GTX, aluminum (green-anodized) (fully assembled w/o springs) (2)
Ring gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)
TRAXXASRing gear, differential, 35-tooth (heavy duty) (use with #7790, #7791 11-tooth differential pinion gears)
Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear)
TRAXXASPinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear)
Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW
TRAXXASCarrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW
Suspension arms, orange, upper (left or right, front or rear), heavy duty (2)
TRAXXASSuspension arms, orange, upper (left or right, front or rear), heavy duty (2)
Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2)
TRAXXASSuspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2)
Shocks, GTX, aluminum (red-anodized) (fully assembled w/o springs) (2)
TRAXXASShocks, GTX, aluminum (red-anodized) (fully assembled w/o springs) (2)
Toe links, X-Maxx® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)
TRAXXASToe links, X-Maxx® (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ alu...
View full detailsWheel nuts, splined, 17mm, serrated (orange-anodized) (4)
TRAXXASWheel nuts, splined, 17mm, serrated (orange-anodized) (4)
Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies (for use only with #7750X driveshaft)
TRAXXASRebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for use only with #7750X driveshaft)
Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)
TRAXXASSteering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)
Wheel nuts, splined, 17mm, serrated (black-anodized) (4)
TRAXXASWheel nuts, splined, 17mm, serrated (black-anodized) (4)
Toe links, X-Maxx® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ aluminum wrench, 10mm (1)
TRAXXASToe links, X-Maxx® (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (157mm) (2)/ rod ends, assembled with steel hollow balls (4)/ a...
View full detailsAdapter, standard servo (adapts standard servo to fit in X-Maxx® or Maxx®)
TRAXXASAdapter, standard servo (adapts standard servo to fit in X-Maxx®)Adapter, standard servo (adapts standard servo to fit in Maxx®, X-Maxx®, or XRT®)
Steering bellcranks/ bellcrank support/servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)
TRAXXASSteering bellcranks/ bellcrank support/servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)
Skidplate, center
TRAXXASSkidplate, center
Shock tower, rear (left & right halves)
TRAXXASShock tower, rear (left & right halves)
Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768, 7768A, 7768G, 7768R, or 7768T)
TRAXXASDriveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768, 7768A, 7768G, 7768...
View full detailsSteering blocks, left & right (require 20x32x7 ball bearings)
TRAXXASSteering blocks, left & right (requires 20x32x7 ball bearings)
Motor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)
TRAXXASMotor mount (assembled with 3x6 flat-head machine screw)/ 3.0mm NL (1)
Body bumper, foam (low profile) (use with #7435 front skidplate)
TRAXXASBody bumper, foam (low profile) (use with #7435 front skidplate)
Spring, shock, white (GTR long) (0.810 rate pink) (1 pair)
TRAXXASSpring, shock, white (GTR long) (0.810 rate pink) (1 pair)