TRAXXAS

Springs, shock, long (natural finish) (GTS) (0.47 rate) (included with TRX-4® Long Arm Lift Kit)

Springs, shock, long (natural finish) (GTS) (0.39 rate, orange stripe) (for use with TRX-4® Long Arm Lift Kit)

Springs, shock, long (natural finish) (GTS) (0.62 rate, blue stripe) (for use with TRX-4® Long Arm Lift Kit)

Axle mount set (complete) (front & rear) (for suspension links)

Wheel hubs, hex, aluminum (blue-anodized) (4)

Drive cup (1)/ 3x8mm CS (for use only with #7750X driveshaft)

Suspension pin retainer (4)

Suspension pins, 4x85mm (hardened steel) (2)

Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14mm CS (2) (for 2 shocks)

Battery plate/ battery strap/ 3x8 flat-head screws (4) (requires #8072 inner fenders)

Body mounts & posts, front & rear (complete set)

Springs, shock (natural finish) (GTS) (0.39 rate, orange stripe) (2)

Axle shaft, rear (left)

Axle shaft, rear (right)

Spider gear shaft (2)/ spacers (4)/16x23.5x.5 stainless washer (2) (for #7781X aluminum differential carrier)

Carriers, stub axle (left & right) (requires 20x32x7 ball bearings)

Caps & spring retainers, GTR shock (upper cap (2)/ hollow balls (4)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

Spring, shock, white (GTR xx-long) (0.711 rate orange) (1 pair)

Pinion gear, differential, 11-tooth (rear) (heavy duty) (use with #7792 35-tooth differential ring gear)

Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 16X23.5X.5 TW

Suspension arms, orange, upper (left or right, front or rear), heavy duty (2)

Suspension pin set, shock mount (front or rear, hardened steel), 4x25mm (2), 4x38mm (2)

Wheel nuts, splined, 17mm, serrated (orange-anodized) (4)

Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for use only with #7750X driveshaft)

Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)

Wheel nuts, splined, 17mm, serrated (black-anodized) (4)

Adapter, standard servo (adapts standard servo to fit in X-Maxx®)Adapter, standard servo (adapts standard servo to fit in Maxx®, X-Maxx®, or XRT®)

Steering bellcranks/ bellcrank support/servo saver/ servo saver spring/ draglink/ 3x20mm shoulder screws (2)

Skidplate, center

Shock tower, rear (left & right halves)

Driveshaft, steel constant-velocity (heavy duty, shaft only, 160mm) (1) (replacing #7750 also requires #7751X, #7754X and #7768, 7768A, 7768G, 7768...

Steering blocks, left & right (requires 20x32x7 ball bearings)