TRAXXAS

Hold down, battery/ hold down retainer/ battery post/ foam spacer/ angled body clip

Lower chassis, low CG (gray)

Water cooling jacket, motor

Radio tray with RPM mount/ radio tray retainer (2)/ stuffing tube clamp/ 4x16mm BCS (stainless) (2)/ 4x10mm BCS (stainless) (2)

Drive dog/ 4x3mm GS (stainless, with threadlock) (1)

Propeller shaft/ flex cable

Spring, shock (red) (long) (GTR) (5.4 rate double orange stripe) (1 pair)

Gear, 20-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw

Bumper, front/ bumper mount, front/ 4x10mm BCS (2)/ 3x25mm BCS (2)

Body mount posts, front & rear (tall, for Summit)

Driveshaft assembly (1), left or right (fully assembled, ready to install)/ M3/12.5mm yoke pin (1)

Shock tower, front

Shocks, GTR composite (assembled) (2) (without springs)

Steering drag link/ 3x10mm shoulder screws (without threadlock) (2)

Spur gear, 86-tooth (48-pitch) (for models with Torque-Control slipper clutch)

Springs, red (for Big Bore shocks) (2.5 rate) (2)

Caster blocks, 30-degree (left & right)/ steering blocks, 30-degree (left & right)

Rod ends, heavy duty (Jato®/Slayer) (8)

Rod ends (12)/ hollow balls (12)

Carrier, differential/ x-ring gaskets (2)/ ring gear gasket/ 6x10x0.5 TW

Engine mount (complete assembly)/ 3x28mm CS with washers (2)/ 3x10 CS with washers (10), ELW 3x6.5x.45 (3)

Rod ends, Revo® (large) with hollow balls (12)

Spring, shock (white) (GTR) (1.6 rate blue) (1 pair)

Linkage, front sway bar (Revo®/Slayer) (3x70mm turnbuckle) (2) (assembled with rod ends, hollow balls and ball stud)

Spring, shock (white) (GTR) (front) (0.9 rate orange) (1 pair)

Caps and spring retainers, GTR shock (upper cap (2)/ hollow balls (2)/ bottom cap (2)/ upper retainer (2)/ lower retainer (2))

Shocks, GTR aluminum (assembled) (2) (without springs)

Spring, shock (red) (GTR) (6.4 rate purple) (1 pair)

Spring, shock (red) (GTR) (5.9 rate blue) (std. rear 120mm) (1 pair)

Spring, shock (red) (GTR) (3.8 rate gold) (1 pair)

Spring, shock (red) (GTR) (1.4 rate double pink stripe)

Spring, shock (GTR) (2.9 rate white) (std. front 90mm)

Spring, shock (white) (GTR) (std. rear) (1.4 rate pink) (1 pair)

Spring, shock (GTR) (3.5 rate green) (std. rear 90mm)

Spring, shock (red) (GTR) (2.6 rate yellow) (1 pair)

Suspension arms (lower) (2) (fits T-Maxx®/E-Maxx)

Servo saver spring, heavy duty (for use with metal-gear servos)

Reverse installation kit (includes all components to add mechanical reverse (no Optidrive®) to T-Maxx® 3.3) (includes 2060 sub-micro servo)

Dust boot, throttle (2)/ return spring (TRX® 2.5, 2.5R, 3.3)

Flywheel nut (TRX® 2.5, 2.5R, 3.3)

Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)

Skid plate set, front (2 pieces, plastic)/ skid plate, rear (1 piece, plastic)

Differential output yokes, black (2)/ 3x5mm countersunk screws (2)/ screw pin (2)