TRAXXAS

Shock shafts, steel, chrome finish (X-long) (2)

Big Bore shocks (short) (hard-anodized & PTFE-coated T6 aluminum) (assembled with TiN shafts w/ springs)(f/r)(2) (Note: Assembled with 32mm sha...

Shock shafts, hardened steel, titanium nitride coated (xx-long) (2)

Turnbuckles, camber link, 47mm (67mm center to center) (front) (assembled with rod ends and hollow balls) (1 left, 1 right)

Suspension arms, black, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

Suspension arms, blue, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

Springs, front (black) (2)

Front axles (2)/ 4mm nylon locknuts (2)

Gear, 29-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 24-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 22-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Suspension arms, green, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

Turnbuckles, camber link, 36mm (56mm center to center) (rear) (assembled with rod ends and hollow balls) (1 left, 1 right)

Camber link set for Bandit® (gray) (plastic/ non-adjustable)

Gear, 12-T pinion (48-pitch) (fits 3mm shaft)/ set screw

Gear, 21-T pinion (48-pitch) / set screw

Gear, 19-T pinion (48-pitch) / set screw

Suspension arms (front) (2)

Half shaft pro-pack (internal-splined (6)/ external-splined (6) (plastic shafts only)

Gear set, metal (for 2070, 2075 servos)

Half shafts, long truck (external-splined (2) & internal-splined (2)/ metal U-joints (4)

Gear, 18-T pinion (48-pitch) / set screw

Wheel hubs, 12mm hex (blue-anodized, lightweight aluminum) (2)/ axle pins (2)

Wheel hubs, 12mm hex (2)/ stub axle pins (2)

Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)

Nuts, aluminum, flanged, serrated (4mm) (red-anodized) (4)

Turnbuckles (54mm) (2)/ 3x6x4mm aluminum spacers (rear camber links)

Silicone diaphragms (4)

Shock shafts, hardened steel, titanium nitride coated (long) (2)

Shock shafts, steel, chrome finish (long) (2)

New style plastic propeller for Villain EX. Requires change to smaller pinion gears when used on older Villains equipped with part 1534 and 1533 pr...

Spur gear, 90-tooth (48-pitch) (for models with Torque-Control slipper clutch)

Steering arm (upper & lower)/ steering link/ servo horn/ servo saver/ servo saver spring/ servo horn mount/ ball stud (2)/ shock mounts, front ...

Wheel nuts, splined, 17mm, serrated (red-anodized) (4)