Filter
TRAXXAS
Battery hold-down (1)/ hold-down retainer, front & rear (1 each)
TRAXXASBattery hold-down (1)/ hold-down retainer, front & rear (1 each)
Planetary gear differential with steel ring gear (complete) (fits Bandit, Stampede®, Rustler®)
TRAXXASPlanetary gear differential with steel ring gear (complete) (fits Bandit®, Stampede®, Rustler®)
Shocks, GTR xx-long hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)
TRAXXASShocks, GTR xx-long, hard-anodized, PTFE-coated bodies with TiN shafts (assembled) (2) (without springs)
BODY MOUNTS F/R POSTS REAR (Ford Fiesta ST Rally)
TRAXXASBody mounts, front & rear/ body post, rear (1)
Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
TRAXXASRebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
BULKHEAD F/R Bulkhead, front or rear
TRAXXASBulkhead, front or rear
Skid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount)
TRAXXASSkid plate, roof (body) (black)/ 3x15mm CS (4) (requires #7713X to mount)
Slipper pressure plate and hub (alloy)
TRAXXASSlipper pressure plate and hub (alloy)
Spur gear (72-Tooth) (32-pitch) w/bushing
TRAXXASSpur gear (72-Tooth) (32-pitch) w/bushing
Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (73mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4...
View full detailsRod ends (GTR shocks) (6)
TRAXXASRod ends (GTR shocks) (6)
Sway bar kit (front and rear) (includes sway bars and linkage)
TRAXXASSway bar kit (front and rear) (includes sway bars and linkage)
Bulkhead, rear (upper) (fits X-Maxx® 8s or XRT™)
TRAXXASBulkhead, rear (upper) (fits X-Maxx® 8s or XRT®) Rear upper bulkhead fits 8s X-Maxx® and XRT® Replacement part for these models: XRT® XRT®: TQi...
View full detailsSuspension arms, lower (left, front or rear) (1)
TRAXXASSuspension arms, lower (left, front or rear) (1)
Glow plug, super-duty (long-medium)/gasket
TRAXXASGlow plug, super-duty (long-medium)/gasket
Bumper, front (X-MAXX)
TRAXXASBumper, front
Slipper clutch, complete (includes slipper clutch hub, clutch pad, spring, 3.0mm NL, 1.5x6mm pin)
TRAXXASSlipper clutch, complete (includes slipper clutch hub, clutch pad, spring, 3.0mm NL, 1.5x6mm pin)
Wheelie bar, blue
TRAXXASWheelie bar, blue
SHOCK TOWER FRNT ALUM BLUE 9539
TRAXXASShock tower, front, 6061-T6 aluminum (blue-anodized)
Friction pegs, slipper (12)
TRAXXASFriction pegs, slipper (12)
Spur gear (70-Tooth) (32-Pitch) w/bushing
TRAXXASSpur gear (70-tooth) (32-Pitch) w/bushing
SHOCK CAPS GTX ALUM BLUE
TRAXXASShock caps, aluminum (blue-anodized), GT-Maxx® shocks (4)/ spacers (4) (for Sledge™)
Wheelie Bar, Orange
TRAXXASWheelie bar, orange (assembled)/ 3x20 CS (8)
LOWER CHASSIS BLACK 166MM BATT COMPARTMENT
TRAXXASLower chassis (black) (166mm long battery compartment) (fits both flat and hump style battery packs)
Driveshaft, front, steel constant-velocity (shaft only, 5mm x 133.5mm)
TRAXXASDriveshaft, front, steel constant-velocity (shaft only, 5mm x 133.5mm) (1)
Air filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ T-Maxx® filter base (angled)/ wire mount/ hardware (1 each) (Fits Maxx® trucks) (TRX® 2.5, 2.5R, 3.3)
TRAXXASAir filter body (high-volume)/ filter support/ cap/ foam filter, pre-filter/ T-Maxx® filter base (angled)/ wire mount/ hardware (1 each) (Fits Maxx...
View full detailsSuspension screw pin set, steel (hex drive) (requires part #2640 for a complete suspension pin set) (Bandit, Rustler®, Stampede®)
TRAXXASSuspension screw pin set, steel (hex drive) (requires part #2640 for a complete suspension pin set) (Bandit®, Rustler®, Stampede®)
Turnbuckles, aluminum (blue-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
TRAXXASTurnbuckles, aluminum (blue-anodized), toe links, 59mm (2) (assembled with rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
Half shaft set, long (plastic parts only) (internal splined half shaft/ external splined half shaft/ rubber boot) (assembled with glued boot) (2 assemblies)
TRAXXASHalf shaft set, long (plastic parts only) (internal splined half shaft/ external splined half shaft/ rubber boot) (assembled with glued boot) (2 as...
View full detailsTurnbuckles, aluminum (orange-anodized), toe links, 59mm (2) (assembled w/ rod ends & hollow balls) (requires 5mm aluminum wrench #5477)
TRAXXASTurnbuckles, Aluminum (orange-Anodized), Toe Links, 59mm (2) (assembled with Rod Ends and Hollow Balls) (requires 5mm Aluminum Wrench #5477)
Camber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)
TRAXXASCamber links, front (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (...
View full detailsBulkhead tie bars, front & rear, aluminum (green-anodized)
TRAXXASBulkhead tie Bars, Front and Rear, Aluminum (green-Anodized)
WHEEL HUB 7MM HEX STEEL
TRAXXASWheel hubs, 7mm hex (steel) (4)/ axle pins (8)
CASTER BLOCKS BLACK L&R MUDBOSS
TRAXXASSteering blocks, left & right (2) (requires 5x11x4mm bearings)
TRAXXASSteering blocks, left & right (2) (requires 5x11x4mm bearings)
SERVO SAVER W/ADAPTERS
TRAXXASSTEERING BLOCKS GREEN L&R MUDBOSS
TRAXXASCARRIER STUB AXLE RED L&R MUDBOSS
TRAXXASBODY SUPPORT/SKID PADS
TraxxasBody Support (includes Front Mount and Rear Latch, Roof and Hood Skid Pads)/ 3x12mm CS (19) (attaches to #7812 Body)
STEERING BLOCKS BLUE L&R -MUDBOSS
TRAXXASSTEERING BELLCRANKS ALUM BLUE
TRAXXASSteering Bellcranks (Left and Right)/ Draglink (6061-T6 Aluminum, Blue-Anodized) (fits XRT™)
Input gear, transmission, 22-tooth/ 2.5x12mm pin
TraxxasInput gear, transmission, 22-tooth/ 2.5x12mm pin
Rod ends (4) (assembled with steel pivot balls)
TRAXXASRod ends (4) (assembled with steel pivot balls) (replacement ends for #8547A, 8547R, 8547X, 8948A, 8948G, 8948R, 8948X, 8997A, 8997G, 8997R, 8997X)
Toe links, front (TUBES orange-anodized, 6061-T6 aluminum) (2) (for use with #8995 WideMaxx™ suspension kit)
TRAXXASToe links, front (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (2) (for use with #8995 WideMaxx® suspension kit)
Carrier, differential/ differential slider/ T-Lock fork
TraxxasCarrier, differential/ differential slider/ T-Lock fork
Shock tower, rear, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)
TRAXXASShock tower, rear, 7075-T6 aluminum (red-anodized) (1)/ body mount bracket (1)
Shock tower, front, 7075-T6 aluminum (blue-anodized)
TRAXXASShock tower, front, 7075-T6 aluminum (blue-anodized) (1)/ body mount bracket (1)
Bulkhead, front
TRAXXASBulkhead, front