TRAXXAS

Wheelie bar, black (assembled)/ 3x20 CS (8)

Bumper mount, rear Rear bumper mount Replacement part for these models: XRT®: TQi™ Traxxas Link™ Enabled 2.4GHz Radio & TSM® (Model# 78086-4)

Spur gear, 46-tooth, steel (1.0 metric pitch)

Suspension arm covers, blue, front (left and right)/ 2.5x8 CCS (12)

Suspension arm, front (right), green

Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (2) (assembled with rod ends and hollow balls)/ aluminum wrenc...

Suspension arm, rear (left), green

Suspension arm covers, green, rear (left and right)/ 2.5x8 CCS (12)

Servo Mount/ Bulkhead Cover/ Chassis Brace/ Steering Cover/ 3x12mm CS (2)/ 3x8mm CS (2)

Servo horn, steering/ linkage, steering (48mm, assembled with pivot balls)

Drive cup, center, front or rear (steel constant-velocity) (1) (fits Sledge®)

Lower chassis (gray) (166mm long battery compartment) (fits both flat and hump style battery packs)

Camber links, rear (TUBES blue-anodized, 7075-T6 aluminum, stronger than titanium) (2) (assembled with rod ends and hollow balls)/ aluminum wrench (1)

Wing, orange/ 4x12mm FCS (4)

Shocks, GT-Maxx®, long, aluminum (blue-anodized) (fully assembled w/o springs) (2)

Bumper, front/ bumper mount/ 4x12 CCS (2)/ 4x22 BCS (2)/ 3x12 BCS (2) (fits 2WD Stampede®) (for LED light kit installation)

Windows, body (tinted) (fits #9711 body)

Caster blocks (c-hub), left & right/ kingpin bushings (4)

Bumper, front/ skidplate, front/ tie bar mount, front/ 3x25 CS (2)

Camber links, rear (TUBES charcoal gray-anodized, 7075-T6 aluminum, stronger than titanium) (2) (assembled with rod ends and hollow balls)/ aluminu...

Chassis

Skid plate, front (1), rear (1)/ rubber impact cushion (1)

Suspension link set, complete (front & rear) (includes steering link (1), front lower links (2), front upper links (2), rear links (4)) (assemb...

BATTERY STRAP

Gearbox housing (front & rear)/ 2x4mm BCS (with threadlock) (2)/ 2x8mm BCS (4)/ 3x6x2.5mm bushings, self-lubricating (6)/ 3x16mm pins (2)

Shock mounts (front & rear)/ battery tray

Suspension arms, upper, green (left or right, front or rear) (2) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

Axle, front (assembled)/ M2.5x0.45 NL (2)

Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads (fits Maxx® with extended chassis (352mm wheelbase)) Battery h...

Driveshaft, rear (shaft only, 5mm x 131mm) (1) (for use only with #9554 stub axle)

Driveshaft assembly, rear, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #9...

Axle shaft, front (hardened steel) (1)

Suspension arm, lower, green (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

Hold down, battery

Steering Blocks, Extreme Heavy Duty, Black (Left and Right)/ 3x20mm BCS (2) (for Use with #9080 Upgrade Kit)

Toe links, front (120mm) (2) (assembled with hollow balls)

Suspension arm, lower, red (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

Shock Shaft, 92mm (GTX) (TiN-coated) (2) (assembled with Rod Ends and Hollow Balls)

Axle cover, front or rear (black) (2)

Bumper, front/ bumper mount (fits 2WD Slash®) (for LED light kit installation)

Tie bars, front, 6061-T6 aluminum (blue-anodized)

Body reinforcement set, orange/ skid pads (roof) (fits #9511 body)

Stub axle nut (4)

Sway bars (front & rear)