TRAXXAS

Toe links, Sledge™ (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (120mm) (2)/ rod ends, assembled with steel hollow balls (4)/ a...

Suspension arms, lower (right, front or rear) (1)

Bulkhead, front (lower)

Caster blocks (c-hubs) (2)/ steering block (2)

Suspension arms, front & rear (4)

Rebuild kit, GTR composite shocks (x-rings, bladders, pistons, e-clips, shock rod ends, hollow balls) (renews 2 shocks)

Suspension arm set, front (includes upper right & left and lower right & left arms)

Spring, shock, white (GTR xx-long) (0.884 rate pink) (1 pair)

Insert, threaded steel (replacement inserts for #7748G, 7748R, 7748X, 8542A, 8542R, 8542T, 8542X) (includes (1) left and (1) right threaded insert)

Axle, rear (assembled)/ M2.5x0.45 NL (2)

Body, GTR long shock, aluminum (blue-anodized) (PTFE-coated bodies) (1)

Piston, damper (2x0.5mm hole, red) (4)/ travel limiters (4)

Ring gear, differential/ pinion gear, differential (12/47 ratio) (rear)

Body, GTR xx-long shock, aluminum (red-anodized) (PTFE-coated bodies) (1)

Suspension arm set, rear (includes upper right & left and lower right & left arms)

Rudder pushrod, assembled/ servo horn/ 3x18mm BCS (stainless) (1)/ 3x15mm CS (stainless) (1)/ 3x6mm CS (stainless) (1)/ NL 3.0 (1)

Stub axle, aluminum, (orange-anodized) (1) (for use only with #7750X or 7896 driveshaft)

Bumper, rear/ bumper mount, rear/ 4x10mm BCS (2)/ 3x25mm BCS (2)

Stub axle, front, 5mm (steel-splined constant-velocity driveshaft) (1)

Housing, differential (front/rear)

Cover, gear/motor plate access cover/ motor mount hinge post / 3x10mm CS w/split and flat washers (1) / 2.5x4mm CS (2) / 3x8mm BCS (1) (for 550 mot...

Spur gear, 61-tooth

Springs, shock (natural finish) (GTS) (0.45 rate) (2)

Driveshaft assembly, inner (1) (fits front & rear, differential side)

Spring, shock (red) (GTR) (0.314 rate) (1 pair)

Axle shafts, front, outer (2)

Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #...

Chassis, charcoal gray

Stub axle, aluminum, (green-anodized) (1) (for use only with #7750X or 7896 driveshaft)

Springs, front (progressive, +20% rate, blue) (2)

Housings, differential, rear

Axle carriers, left & right (1 each)

Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Spur gear, 55-tooth

Drag link, machined 6061-T6 aluminum (red-anodized)

Cush drive key/ pin/ elastomer damper

Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Bumper, front/ bumper mount, front (pink)

Wheel hubs, 7mm hex (4)/ axle pins (8)

Control box (complete) (EZ-Start® 2)

Axle carriers, left & right (1 each) (use with larger 6x13mm ball bearings)/ bearing adapters (for 6x12mm ball bearings) (2)/ dust boot retaine...

Gear, 23-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Plate, motor, 6061-T6 aluminum (red-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)

Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft)