TRAXXAS

Spur gear, 61-tooth

Bumper mount, front/ bumper support

Springs, shock (natural finish) (GTS) (0.45 rate) (2)

Driveshaft assembly, inner (1) (fits front & rear, differential side)

Spring, shock (red) (GTR) (0.314 rate) (1 pair)

Axle shafts, front, outer (2)

Driveshaft assembly, front, extreme heavy duty with 6mm axle (1)/ screw pin (1) (left or right) (fully assembled, ready to install) (for use with #...

Stub axle, aluminum, (green-anodized) (1) (for use only with #7750X or 7896 driveshaft)

Springs, front (progressive, +20% rate, blue) (2)

Housings, differential, rear

Axle carriers, left & right (1 each)

Gear, 18-T pinion (machined) (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Spur gear, 55-tooth

Cush drive key/ pin/ elastomer damper

Driveshaft assembly, front, extreme heavy duty (1) (left or right) (fully assembled, ready to install)/ screw pin (1)

Wheel hubs, 7mm hex (4)/ axle pins (8)

Gear, 23-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears)

Plate, motor, 6061-T6 aluminum (red-anodized) (4mm thick)/ 3x10mm CS with split and flat washer (2)

Gear set, center differential (output gears (2)/ spider gears (2)/ spider gear shaft)

Suspension arms, lower, black (left and right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

Springs, shock (natural finish) (GT-Maxx®) (1.210 rate) (2)

Bumper, rear/ bumper mount, rear

Differential output yoke assembly, extreme heavy duty (2) (left or right, front or rear) (assembled with external-splined half shaft)/ screw pin (2)

Chassis (162mm Long Battery Compartment) (fits Flat Style Battery Packs) (use Only with #7430R Front Bulkhead and #6726X Battery Hold-Down)

Wheelie bar, black chrome (assembled)/ wheelie bar mount

Housing, differential (rear)

Half shafts, short (heavy duty) (external-splined (2) & internal-splined (2))/ metal U-joints (4)

Bumper, front/ skidplate, front (black)

Spur gear, 83-tooth (48-pitch) (for models with Torque-Control slipper clutch)

Air filter and pre-filter inserts, foam (high-volume) (3) (pre-oiled, assembled) (use with #5266 filter body) (TRX® 2.5, 2.5R, 3.3)

Drag link, machined 6061-T6 aluminum (orange-anodized)

Box, receiver (sealed)/ foam pad/ silicone grease/2.5x8mm BCS (2)/ 3x10mm CCS (2)/ 3x15mm CCS (2)