TRAXXAS

Wheel hubs, 12mm hex, 6061-T6 aluminum (blue-anodized) (4)/ 3x10 screw pin (4)

Spur gear, 52-tooth, steel (1.0 metric pitch)

Suspension arm, front (right), blue

Suspension arm, rear (right), blue

Differential, center, complete (fits Sledge®)

Driveshaft, steel constant-velocity (assembled), front (1)

Servo saver/ servo saver spring/ servo horn, steering (assembled)

Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5x48.2mm (2), 3.5x56.7mm (2)/ M3x0.5mm NL, flanged (4)

Stub axle, front

Differential output cup, center (hardened steel)/ 2.5x12mm pin

Gear, 13-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

Camber links, rear (144mm) (2) (assembled with hollow balls)

Carriers, stub axle (left and right)

Camber links, front (117mm) (2) (assembled with hollow balls)

Shock caps, GT-Maxx® shocks (2)/ spring perch/ adjusters (2) (for 2 shocks)

Stub axle, rear (for use only with #9557 rear driveshaft)

Retainer, battery hold-down (front and rear) (1 each)

Servo horn, steering, metal

Gear, 12-T pinion (machined, hardened steel) (1.0 metric pitch) (fits 5mm shaft)/ set screw

Rebuild kit, steel constant-velocity driveshaft (includes pins for 2 driveshaft assemblies) (for #9550 front or #9654X rear steel CV driveshafts)

Steering blocks, left & right/ 4x16mm BCS (4)/ M4x0.7 NL (4)

Tie bars, rear, 6061-T6 aluminum (blue-anodized)

Shocks, GT-Maxx®, aluminum (blue-anodized) (fully assembled w/o springs) (2)

Sway bar kit, Sledge® (front and rear) (includes front and rear sway bars and linkage)

Suspension arm, lower, black (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit) Heavy-duty WideMaxx® suspension arms ...

Suspension arm, lower, black (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

Suspension arm, lower, orange (1) (right, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

Suspension arm, lower, orange (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

Suspension arm, lower, green (1) (left, front or rear) (for use with #7895 X-Maxx® WideMaxx® suspension kit)

Suspension Kit, X-Maxx® WideMaxx®, Red (includes Front and Rear Suspension Arms, Front Toe Links, Driveshafts, Shock Springs)

Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit®, Rustler®, Stampede®, Slash® 2WD)

Plate, Motor, Lightweight machined 6061-T6 Aluminum (blue-Anodized) (4mm thick)/ 3x10mm CS with Split and Flat Washer (2)

Bumper mount, front/ skidplate/ 3x12mm BCS (7)

Chassis

Wheelie bar mount (heavy duty)

Suspension arms, upper, red (left or right, front or rear) (2) (for use with #8995 WideMaxx® suspension kit)

Battery hold-down (2)/ battery clip/ hold-down post/ screw pin/ pivot post screw

Shock tower, rear

Axle, wheelie bar, 6061-T6 aluminum (gray-anodized) (1)/ 3x12 BCS (with threadlock) (2)

Differential gasket/ x-rings (2)

Wheelie bar (assembled)

Output gear, transmission, 44-tooth (1) (requires #8950X or 8996X steel constant-velocity driveshafts and #8983 driveshaft adapter)