TRAXXAS

Ring gear, differential/ pinion gear, differential (rear)

Ring gear, differential/ pinion gear, differential (rear)

Rock sliders, left & right

Rod end set, complete (standard (10), angled 10-degrees (8), offset (4))

Rod ends (10)

Rod ends (12)/ hollow balls (12)

Rod ends (GTR shocks) (6)

Rod Ends, Standard (4) (assembled with Hollow Balls) (fits #9547/9548 Series Aluminum Camber Links and #9549 Series Aluminum Toe Links)

Rod ends, angled 10-degrees (8)

Rod ends, extended (standard (4), angled (4))/ hollow balls (8) (for use with TRX-4® Long Arm Lift Kit)

Rod ends, heavy duty (Jato®/Slayer) (8)

Rod ends, heavy duty (push rod) (8) (assembled with hollow balls)

Rod ends, heavy duty (toe links) (8) (assembled with hollow balls)

Rod ends, offset (4)

Rod ends, Revo® (large) with hollow balls (12)

Rod Ends, short (6)/ hollow balls (6)

Rod, connecting (TRX® 2.5, 2.5R, 3.3)

Roller clutch/ 6x8x0.5 TW (1) (also called one-way bearing) (TRX® 2.5, 2.5R, 3.3)

Tires, Rubber (2) (fits Traxxas® #7775X Wheelie Bar Wheels)

Rudder/ rudder arm/ hinge pin/ 3x15mm BCS (stainless) (2)/ NL 3.0 (2)/4x3mm BCS (stainless, with threadlock) (1)

Ring gear, differential/ pinion gear, differential (rear)

Ring gear, planetary

Rock Sliders/ Rock Slider Caps (Left and Right)

Rocker arm post (aluminum) (4)

Rocker arm post (steel) (2)

Rocker arm set, progressive-1 (90-T) (use with #5318 or #5318X pushrod)

Rocker arm set, progressive-3 (90-T) (requires pushrods part #5319 or 5319X)

Rod ends (8)/ hollow balls (8) (fits 1/16 and 1/18 accessory suspension links)

Rod ends, Revo® (large, for rear toe link only) (4)

Rod ends, small, with hollow balls (6) (for Revo® steering linkage)

Roll cage

Roll hoop, plastic/ transmission skid guard, plastic

Roll Hoop (composite)/ EZ-Start® plug mount

Roof visor/ visor retainer/ visor lens (2)/ 2.6x6 BCS (3)/ 3x4 GS (4)

Rotor blade grips (black) (4)

Rotor blade set, blue (2)/ 1.6x5mm BCS (2)

Rotor blade set, green (2)/ 1.6x5mm BCS (2)

Rotor blade set, orange (2)/ 1.6x5mm BCS (2)

Rotor blade set, red (2)/ 1.6x5mm BCS (2)

Rotor blade set, upper & lower (black) (4)

Rotor blade set, white (2)/ 1.6x5mm BCS (2)

Rubber plugs, charge jack, two-speed adjustment (Jato)

Rudder (127.5 mm)/ rudder arm/ hinge pin/ 3x15mm BCS (stainless) (2)/ NL 3.0 (2)/ 4x3mm BCS (stainless, with threadlock) (1)

Rudder mount/ rudder pivot/ 4x14mm BCS (stainless) (4)/ NL 4.0 (2)

Rudder mount/ rudder pivot/ 4x14mm BCS (stainless) (4)/ NL 4.0 (2)