Filter
TRAXXAS
Chassis, low CG (gray)
TraxxasChassis, low CG (gray)
Chassis, upper (composite) NITRO SLASH
TraxxasChassis, upper (composite)
Chrome Lower Left Front HD Suspension Arm
TraxxasChrome Lower Right Front HD Suspension Arm
TraxxasClipless Body Mounts for Ford Fiesta ST Rally
TraxxasClipless Mounts, Body (Left and Right) (for #7412 Series Bodies)
Clutch bell (14-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)
TraxxasClutch bell (14-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm e-clip (2) (requires 5x10x4mm ball bearings part #4609) (1.0 metric pitch)
Clutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
TraxxasClutch bell (15-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
Clutch bell (17-tooth)/5x8x0.5mm fiber washer (2)/ 5mm e-clip (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
TraxxasClutch bell (17-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm e-clip (2) (requires 5x11x4mm ball bearings part #4611) (1.0 metric pitch)
Clutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
TraxxasClutch bell, (22-tooth)/ 5x8x0.5mm fiber washer (2)/ 5mm E-clip (requires #4611-ball bearings, 5x11x4mm (2))
Clutch shoes (2)/ spring (N. Rustler®/N.Sport®/N.Stampede®)
TraxxasClutch shoes (2)/ spring (N. Rustler®/N. Sport®/N. Stampede®)
Clutch shoes (2)/ spring (T-Maxx®/Revo®/Jato®/Nitro 4-Tec®)
TraxxasClutch shoes (2)/ spring (T-Maxx®/Revo®/Jato®/Nitro 4-Tec®)
CMPLT LED KIT, F/R 4WD RUSTLER
TraxxasLED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 4WD Rustler®)
CMPLT LED KIT, F/R 4WD SLASH
TraxxasLED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits Slash® 4X4)
Collars, screw (2)/ set screws, 3mm (2)
TraxxasCollars, screw (2)/ grub screws, 3mm (2)
Complete Slipper Clutch
TraxxasComposite Center Driveshaft
TraxxasCone, split beveled
TraxxasCone, split beveled
CONNECTOR WIRING HARNESS
TraxxasConnector, wiring harness (EZ-Start® and EZ-Start® 2)
Connector, 25.2 volt to 14.8 volt jumper (allows a Traxxas® dual-battery 25.2 ESC to run on a single 14.8V battery pack)
TraxxasConnector, 25.2 volt to 14.8 volt jumper (allows a Traxxas® dual-battery 25.2 ESC to run on a single 14.8V battery pack)
Connector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)
TraxxasConnector, power tap (with cable)/ 2.6x8 BCS (2) (use #6549 power tap for telemetry voltage)
Connector, power tap (with voltage sensor)/ wire tie/ 2.6x8 BCS (2)
TraxxasConnector, power tap (with voltage sensor plug)/ wire tie/ 2.6x8 BCS (2)
Connector, wiring harness (EZ-Start® and EZ-Start® 2)
TraxxasConnector, wiring harness (EZ-Start® and EZ-Start® 2)
Control box (complete) (EZ-Start® 2)
TraxxasControl box (complete) (EZ-Start® 2)
COOLING FAN (3483 MOTOR)
TraxxasCooling fan kit (with shroud)/ 2.5x16mm CS (with threadlock) (4) (fits #3483 motor) Lower your Velineon motor’s temperatures with this cooling fan ...
View full detailsCOOLING FAN DUAL 1200XL MOTOR
TraxxasDual cooling fan kit, low profile (with shroud) (fits #3491 motor)/ 3x16 CS (8)
Cooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)
TraxxasCooling fan kit (with shroud) (fits #3351R and #3461 motors) (requires #3458 heat sink to mount)
Cooling fan kit (with shroud), Velineon® 540XL motor
TraxxasCooling fan kit (with shroud), Velineon® 540XL motor
Cooling fan, Velineon® VXL ESC (fits VXL-6s & VXL-8s)
TraxxasCooling fan, Velineon® VXL ESC (fits VXL-4s, VXL-6s & VXL-8s)
Cooling fan, Velineon® VXL-3s ESC
TraxxasCooling fan, electronic speed control, Velineon® VXL-3s or BL-2s™
Copy of Black Extreme Heavy-Duty Front Shock Tower
TraxxasCopy of DSHAFT STEEL CV FRONT OR REAR
TraxxasCopy of Head screws, 3x15mm cap-head machine (hex drive) (6) (TRX 2.5)
TraxxasCoupler, exhaust (silicone)
TraxxasCoupler, exhaust (siliconee)
Chassis, Revo (3mm 6061-T6 aluminum) (anodized blue)
TraxxasChassis, Revo® (3mm 6061 T-6 aluminum) (anodized blue)
Chassis, Revo 3.3 (extended 30mm) (3mm 6061-T6 aluminum) (anodized blue)
TraxxasChassis, Revo® 3.3 (extended 30mm) (3mm 6061 T-6 aluminum) (anodized blue)
Chassis, Slash
TraxxasChassis, Slash
Chassis, Slash 4X4
TraxxasChassis, Slash 4X4
Clutch bell, forward/ reverse
TraxxasClutch bell, forward/ reverse
Clutch bell, hardened steel (18-tooth) (32-pitch) (requires two 5x10mm ball bearings, part #4609) (N. Hawk/Buggy/Street)
TraxxasClutch bell, hardened steel (18-tooth) (32-pitch) (requires two 5x10mm ball bearings, part #4609) (N. Hawk/Buggy/Street)
CLUTCH GUARD
TraxxasClutch guard
Communication link, telemetry expander
TraxxasCommunication link, telemetry expander
Complete Slipper Clutch
TraxxasControl box battery cover w/ belt clip (EZ-Start 2)
TraxxasControl box battery cover with belt clip (EZ Start 2)
Cooling head, PowerTune (machined aluminum, blue-anodized) (TRX 3.3), head protector (1), 3x6mm CCS (5)
TraxxasCooling head, PowerTune (machined aluminum, blue- anodized) (TRX® 3.3), head protector (1), 3x6mm CCS (5)
Copy of Accessory power supply (regulated, 3V, 3 amp)/ power tap connector (with cable)/ 3x10 BCS (2)/ 2.6x8 BCS (2)
TraxxasCopy of BODY RAPTOR R BLACK COMPLETE SKU: 10112-BLK
TraxxasCopy of Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link
TraxxasCover plate, steering servo/ 3x8 BCS (4)
TraxxasCover plate, steering servo/ 3x8mm BCS (4)