Filter
Traxxas
Propeller shaft/ flex cable
TraxxasPropeller shaft/ flex cable
Propeller shaft/ flex cable, DCB M41 (380.9mm)
TraxxasPropeller shaft/ flex cable, DCB M41 (380.9mm)
Propeller, 42x59mm
TraxxasPropeller, 42x59mm
Propeller, left/ 4.0mm GS (set screw) (1)
TraxxasNew style plastic propeller for Villain EX. Requires change to smaller pinion gears when used on older Villains equipped with part 1534 and 1533 pr...
View full detailsPropeller, right/ 4.0mm GS (set screw) (1)
TraxxasNew style plastic propeller for Villain EX. Requires change to smaller pinion gears when used on older Villains equipped with part 1534 and 1533 pr...
View full detailsPTFE-coated washers (5x11x.5mm) (use with self-lubricating bushings)
TraxxasPTFE-coated washers (5x11x.5mm) (use with self-lubricating bushings)
PTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
TraxxasPTFE-coated washers, 5x8x0.5mm (20) (use with ball bearings)
Pull ring, fuel tank cap (1)/ engine shut-off clamp (1)
TraxxasPull ring (2), fuel tank cap (1)/ engine shut-off clamp (1)
Push bar, bumper (chrome) (fits #8069 bumper)
TraxxasPush bar, bumper (chrome) (fits #8069 bumper)
Push rod (aluminum) (assembled with rod ends) (2) (use with progressive-2 rockers)
TraxxasPush rod (aluminum) (assembled with rod ends) (2) (use with progressive-2 rockers)
Push rod (molded composite) (green) (4)/ hollow balls (8)
TraxxasPush rod (molded composite) (green) (4)/ hollow balls (8)
Push rod (molded composite) (red) (4)/ hollow balls (8)
TraxxasPush rod (molded composite) (red) (4)/ hollow balls (8)
Push rods (steel), heavy duty (2) (assembled with rod ends)
TraxxasPush rod (steel), heavy duty (2) (assembled with rod ends)
Push rods, aluminum (blue-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)
TraxxasPush rods, aluminum (blue-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)
PWR SUPPLY 3V 3AMP W/PWR TAP
TraxxasRC CAR/TRUCK STAND BLUE
TraxxasRC Car/truck Stand, Blue (assembled)
RC CAR/TRUCK STAND X-TRUCKS BLUE
TraxxasRC Car/truck Stand, X-Trucks™, Blue
Rear Black Chrome Wheels & Belted S1 Slick Tires (2)
TraxxasTires & wheels, assembled, glued (split-spoke, black chrome wheels, slick tires (S1 compound), foam inserts) (rear) (2)
REAR BUMPER/BUMPER MOUNTS
TraxxasBumper, Rear/ Bumper Mounts, Rear (upper and Lower) (fits Ford Raptor R)
Rear Clipless Body Latch & Mount for Ford Raptor R
TraxxasLatch, Body Mount, Rear/ Rear Latch Mount (2)/ 3x8mm BCS (4) (for Clipless Body Mounting) (attaches to #10111 Body)
REAR DRIVESHAFT O-RING, SLEDGE
TraxxasO-rings (6)
Rear Shock Tower
TraxxasREAR SHOCK TWR EXTENSIONS L&R (Pro Scale Sand Car)
TraxxasRear Upper Bulkhead
TraxxasRebuild kit (for Revo®/E-Revo® (first generation)/T-Maxx®/E-Maxx steel constant-velocity driveshafts) (includes pins, dustboots, & lube for 2 driveshafts assemblies)
TraxxasRebuild kit (for Revo®/E-Revo® (first generation)/T-Maxx®/E-Maxx steel constant-velocity driveshafts) (includes pins, dustboots, & lube for 2 d...
View full detailsPROPELLER SHAFT FOR 3/16 SHAFT
TraxxasThis special shaft allows the use of non-metric 3/16" ID aftermarket props on Traxxas® boats. Two packages are required for dual outdrive boats..
Pull ring (1)/ fuel tank cap (1)/ engine shut-off clamp (1)/ 3x10 BCS (1)
TraxxasPull ring (1)/ fuel tank cap (1)/ engine shut-off clamp (1)/ 3x10 BCS (1)
Pull string, recoil starter (TRX 2.5, 2.5R)
TraxxasPull string, recoil starter (TRX® 2.5, 2.5R)
Pulleys, 20-groove (middle) (2)/flanges (2)/ axle pins (2)
TraxxasPulleys, 20-groove (middle) (2)/flanges (2)/ axle pins (2)
Push bar, bumper, chrome (assembled) (fits #8137 bumper)
TraxxasPush bar, bumper, chrome (assembled) (fits #8137 bumper)
Push button, remote/ switch cover/ 2x12 CM (2)
TraxxasPush button, remote/ switch cover/ 2x12 CM (2)
Push rod (aluminum) (assembled with rod ends) (2) (red) (use with #5359 progressive 3 rockers)
TraxxasPush rod (aluminum) (assembled with rod ends) (2) (red) (use with #5359 progressive 3 rockers)
Push rod (aluminum) (assembled with rod ends) (2) (use with long travel or #5357 progressive-1 rockers)
TraxxasPush rod (aluminum) (assembled with rod ends) (2) (use with long travel or #5357 progressive-1 rockers)
Push rod (molded composite) (red) (4)/ hollow balls (8)
TraxxasPush rod (molded composite) (4)/ hollow balls (8) (1/16 Slash)
Push rod (steel) (assembled with rod ends) (2) (black) (use with #5359 progressive 3 rockers)
TraxxasPush rod (steel) (assembled with rod ends) (2) (black) (use with #5359 progressive 3 rockers)
Push rod (steel) (assembled with rod ends) (2) (use with long travel or #5357 progressive-1 rockers)
TraxxasPush rod (steel) (assembled with rod ends) (2) (use with long travel or #5357 progressive-1 rockers)
Push rod (steel) (assembled with rod ends) (2) (use with progressive-2 rockers)
TraxxasPush rod (steel) (assembled with rod ends) (2) (use with progressive-2 rockers)
Push rods, aluminum (green-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)
TraxxasPush rods, aluminum (green-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)
Push rods, aluminum (red-anodized) (4) (assembled with rod ends)
TraxxasPush rods, aluminum (red-anodized) (4) (assembled with rod ends) (1/16 Slash)
Push Rods, Aluminum (Red-Anodized), Heavy Duty (2) (assembled with Rod Ends and Threaded Inserts)
TraxxasPush rods, aluminum (red-anodized), heavy duty (2) (assembled with rod ends and threaded inserts)
R. SHOCK TWR (N. STAMPEDE)
TraxxasR. SHOCK TWR (N. STAMPEDE)
Radiator, black
TraxxasRadiator, black
Radio tray/ radio tray retainer (2)/ 4x16mm BCS (stainless) (2)
TraxxasRadio tray/ radio tray retainer (2)/ 4x16mm BCS (stainless) (2)
Radio tray/ radio tray retainer (2)/ stuffing tube clamp/ 4x16mm BCS (stainless) (2)/ 4x10mm BCS (stainless) (2)
TraxxasRadio tray with RPM mount/ radio tray retainer (2)/ stuffing tube clamp/ 4x16mm BCS (stainless) (2)/ 4x10mm BCS (stainless) (2)
RC CAR/TRUCK STAND LEVER/HARDWARE
TraxxasPlastic Components, Locking Lever/ Assembly Hardware (for #8796 Or 8797 RC Car/truck Stand)
Rear Window/ Rear Window Retainer/ Engine Cover/ 2.6x8mm BCS (8)
TraxxasRear window/ rear window retainer/ engine cover/ 2.6x8mm BCS (8)
Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))
TraxxasRebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))